Is Tekonsha Wiring Affected By OEM Recall for 2022 Kia Sorento Trailer Wiring

Question

Question:

Question regarding part # TK26FR. Kia has sent out recalls for factory wiring harnesses for tow-hitches... Is this the same as the OEM wiring harness and thus possibly affected. or do you happen to know if the issue is related to dealer installation method rather than product? I could not get a reply for Kia whether or not if was a affected with this wiring harness on their recall notice. All they show is a picture of a car having a hitch or not, saying if yo have a hitch you are affected even though they specifically mention the wiring harness being the issue, the image to determine if you are affected only shows an image of having a hitch or not, not the actual wiring harness which is very non-helpful... Appreciative of any information you might have on the issue. Some recall info mentions The problem should only impact 4-pin harnesses supplied by Mobis Parts America. I cant tell if that is same manufacturer as part TK26FR? https://www.nhtsa.gov/recalls?nhtsaId=22V703000 Regards.

asked by: Andreas

0

Expert Reply:

Thanks for all of that information!

From what I'm seeing it looks like that Mobis Parts America wiring harness is something that could be added on at the dealership if requested which means the issue would be isolated to that wiring harness alone and not the standard OEM wiring of the vehicle. The T-One Wiring Harness # TK26FR is made by Tekonsha which is different than Mobis Parts America to you will be perfectly safe to install this wiring harness as an alternative.

This harness tees into plugs behind your tail lights and then draws power directly from the battery on your 2022 Kia Sorento via the included lead. I also recommend picking up the mounting brackets # 18144 and # 18140 so you can keep the 4-Way connector located near your hitch receiver.

Attached are some videos and installation instructions for you to check out.

expert reply by: Jon G

0

Answer 1

In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will have…

view full answer...

Answer 2

The only difference between the Curt and etrailer trailer hitches for your 2023 Kia Sorento is the finish. The etrailer hitch sports a matte black finish, while the Curt hitch has a glossier finish, so you can choose which you prefer. The hitches…

view full answer...

Answer 3

There really won't be able to tell if your 2021 Kia Sorrento is wired for the trailer lights. If you bought the vehicle with the towing package, then the wires will be incorporated in the factory harness. Right now, there is only one plug in…

view full answer...

Answer 4

Yes, the Tekonsha 4-pole wiring harness item #TK26FR is compatible with your 2021 Kia Sorento. The harness connects behind the rear tail lights of your vehicle by removing a plug on either side and inserting the wiring harness between the connectors.…

view full answer...

Answer 5

I do have an option for you but there isn't a plug and play seven way trailer connector option for a 2021 Kia Sorento without the factory tow package therefore no, the Tekonsha OEM Replacement Vehicle Wiring Harness with 7 Way Trailer Connector…

view full answer...

Answer 6

Yes, we do have a 4-way wiring harness for your 2023 Kia Sorento. I recommend the Tekonsha T-One Vehicle Wiring Harness item #118269. This custom fit wiring harness plugs into your Sorento's factory tow package behind your driver's side rear…

view full answer...

Answer 7

For a 2022 Kia Sorento, your maximum tongue capacity according to the owner's manual is approximately 220lbs. If you're looking for a hitch the Curt Trailer Hitch #C34ER is a great option and will allow towing up to 4,000lbs. If you need…

view full answer...

Answer 8

I recommend the etrailer Trailer Hitch Receiver #e28AR for your 2023 Kia Sorento. This custom fit receiver has a 2" receiver tube allowing you to use it with a large amount of accessories. It is rated for up to 600 bs of tongue weight and 4,000…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...