Recommended Trailer Hitch Receiver and Vehicle Wiring Harness For a 2023 Kia Sorento

Question

Question:

which receiver fits the new 2023 Kia Sorento?

asked by: Debra

0

Expert Reply:

I recommend the etrailer Trailer Hitch Receiver # e28AR for your 2023 Kia Sorento. This custom fit receiver has a 2" receiver tube allowing you to use it with a large amount of accessories. It is rated for up to 600 bs of tongue weight and 4,000 lbs towing capacity.

For the wiring we offer the 4-Way # 118269 and 7-Way # TK24FR options. The 7-way allows you to connect to a Tekonsha Brake Controller # 90195. The Mounting Bracket # 18144 will allow you to secure the 4-way end to the tab on the receiver. We also have the Mounting Bracket # PK12711U if you go with the 7-way connector.

expert reply by: Bud M

0

Answer 1

Yes, we do have a 4-way wiring harness for your 2023 Kia Sorento. I recommend the Tekonsha T-One Vehicle Wiring Harness item #118269. This custom fit wiring harness plugs into your Sorento's factory tow package behind your driver's side rear…

view full answer...

Answer 2

Thanks for all of that information! From what I'm seeing it looks like that Mobis Parts America wiring harness is something that could be added on at the dealership if requested which means the issue would be isolated to that wiring harness alone…

view full answer...

Answer 3

In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will have…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...