Length of the Wire on the Curt 7-Way Adapter part # C57003

Question

Question:

how long is the wire on this part?

asked by: Don

0

Expert Reply:

I pulled a Curt 7-Way Adapter par # C57003 from our warehouse to measure it and found that the wire measures 9-1/2 inches from the back of the mounting surface to the end of the plug. Check out the video I attached to see this measurement.

expert reply by: Jameson C

0

Answer 1

The Curt 7-Way adapter #C57003 can be used on any vehicle that has the bulb out sensor problem when towing a trailer with LED lights. Originally when the part came out the issue seemed to only affect German vehicles like Audi, Volkswagen, and so on.…

view full answer...

Answer 2

The 7-Way Trailer Adapter for Towing Trailers with LED Lights #C57003 is designed to just plug right in to the 7-way of your 2022 Volkswagen Atlas Cross Sport. It comes with a bracket that you could use to attach it to the bottom of the rear bumper…

view full answer...

Answer 3

Yes, you can use the Curt 7-Way to 7-Way adapter #C57003 with your 2014 Volkswagen Touareg. It can actually be used with any vehicle that has a 7-Way. The vehicles listed were the ones that this adapter was originally created for because that is when…

view full answer...

Answer 4

There are a few troubleshooting steps to help you figure out why you have no power. I would start by making sure that there is not any corrosion or debris blocking your connection points. If they are clean or still no power after cleaning, I would…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Length of the Wire on the Curt 7-Way Adapter part # C57003

Product Page this Question was Asked From

Continue Researching