Installation of etrailer Trailer Hitch Receiver on 2019 Ford Explorer With 4 Exhaust Hangers

Question

Question:

Our 2019 For Explorer Sport has 4 hangers for the exhaust. The video says there are only 3. Will the etrailer still fit? Do I need to remove all 4 hangers? 2 in rear and 2 underneath?

asked by: Matt

0

Expert Reply:

The etrailer Trailer Hitch Receiver # e98867 will still fit your 2019 Ford Explorer. You will have to remove the exhaust from all 4 hangers to lower it for the hitch installation. That will be the only exception for the installation process. Make sure to keep your exhaust secure with a wire or strap to prevent damage.

expert reply by: Robin H

0

Answer 1

The etrailer.com Trailer Hitch Receiver part #e98867 is only a fit for a 2011 - 2019 Ford Explorer. The reason for this is that it is a custom fit trailer hitch which is what allows it to retain bolt-on installation. The majority of our trailer…

view full answer...

Answer 2

Hitch manufacturers have to work with how the vehicle manufacturers design the vehicles. On your 2017 Ford Explorer there happens to be access to a third hole on the frame on the one side so they went ahead and utilized it. With it's…

view full answer...

Answer 3

There is a trailer hitch receiver that fits your 2016 Ford Explorer which will still allow your Hands-Free liftgate to work, but you may have to kick to the side of the receiver, as opposed to the exact center where the receiver is. What you will…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Installation of etrailer Trailer Hitch Receiver on 2019 Ford Explorer With 4 Exhaust Hangers

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching