Curt Custom Fit Vehicle Wiring - Trailer Hitch Wiring - C56306 Review Video

There are many different wiring harnesses on Police Interceptors, and the photo you've attached is not a common fit for trailer wiring. I don't believe that harness is for your trailer wiring even though it looks similar. I've attached…

The Tekonsha T-One Vehicle Wiring Harness #118540 referenced in your question is the correct harness and is confirmed to fit your 2013 Ford Explorer. The T-One connector will plug directly to the harness that is located beneath the rear of your…

The T-One Vehicle Wiring Harness #118540 with it's single connector should be tapping into the vehicle stop/turn signals. If yours isn't active but the vehicle signals are working I'd first try unplugging and plugging the connectors in to…

Yes, #RP30047A is the correct head and crossmember replacement for the Reese Fifth Wheel Hitch #RP30047.

If your 2017 Ford Explorer has the factory prep towing package installed, then you might have a brake controller plug-in wiring on the vehicle to connect your brake controller. However, not all models with the tow package had the wiring installed and…

You can determine if you have a tow package by reaching out to a Ford dealer or by checking the undercarriage of Explorer. If it does have the tow package there will be a trailer hitch receiver and either a 4-pole or 7-way wiring harness visible as…

If your 2013 Ford Explorer has a factory-installed 7-way trailer socket, rather than a 4-pole flat type connector, there will also be a factory-installed under-dash connection port for installation of a brake controller like the Tekonsha Prodigy P3…

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

I called my contact at Draw-Tite and asked about the #76034 trailer hitch installation on your 2014 Ford Explorer Interceptor. They told me there are no notes about the fit and like us, they have not had a chance to install one on that specific…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

I checked with Curt and they list wiring harness #C56278 as a fit for all styles of the 2013 Ford Explorer so that would include models with or without the factory tow package.

I have a super easy brake controller solution for your 2017 Ford Explorer with the Curt Echo brake controller part #C51180 which plugs into an active 7-way and once synced to a smartphone is ready to tow. For an easy to install 7-way kit all you need…