Replacement Hub for UFP H-1377 on Trailer
Question:
i have a wheel drum . ufp h-1377 zd5 no one knows what i need .its 4 1/2 xd 5 14 inch it oil bath front bearing is cmc L44549 no clue on rest other than it larger
asked by: Cathy H
Expert Reply:
The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing # L68149 and an outer bearing # L44649 which has same inner diameter as the less common L44549 that you mentioned.
We do not have any oil bath hubs at this capacity but we do have grease hubs that are pre-greased that fit like the part # AKHD-545-35-EZ-K for a hub/drum with a 5 on 4-1/2 inch bolt pattern or the # AKIHUB-545-35-K which is an idler hub.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Q&A: Replacement Bearings, Races and Grease Seal For a UFP HD-1377-10 Trailer Hub
- Q&A: Replacement Wheel Studs or Bolts for UFP Hub with H-1377 Stamp on Hub
- Q&A: Compatibility between UFP HD1377 Drum/Hub and AKUBRK-35-D Trailer Brake Assembly
- Q&A: Replacement Hub for Magic Tilt Trailer with Bearings L68149 L44649
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Search Results: h1377
- Video: etrailer Trailer Idler Hub Assembly Installation
- Search Results: boat trailer hubs
- Search Results: dexter hub seals
- Search Results: dexter 8~248
- Search Results: dexter hub 8 248
- Shop: Ultra-Fab Stackable Stabilizers for Small Trailers and Campers - 6,000 lbs - Qty 4
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: CE Smith Tie-Down Bracket for Boat Trailers - Galvanized Steel - Bolt On - Qty 1
- Shop: Grease Seals 10-36 (pair)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: spindle castle nut
- Video: Bearing Repacking and Grease Seals Installation
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing