How to Pick Out Replacement Hub for UFP Hub Marked H-1377 A4E

Question:

I need to find a replacement hub for this part #.H-1377 A4E. The old hub is damaged so I could not install the new bearings. Can you give me a part # for the hub. The bearings I picked up from an auto parts store that seem to fit the hub is as follows: #L68110 for the inner and L44649 for the outer. These bearings do fit my axle. Any help would be appreciated. Ken The hub is off a trailrite trailer. I think its a 2000.

asked by: Ken C

Helpful Expert Reply:

I can help you pick out the correct hub, but we don't have a cross-reference part number for the one you listed.

In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.

Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.

If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs that SHOULD have the same bearing numbers as what you have. The L68110 is a race and not a bearing, but we know that it works with the L68149 bearing.

You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.

expert reply by: Jameson C