Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer

Question

Question:

Do you have a cross reference for a Ufp h-1377 p261 I need a total hub and bearing kit. It’s a 2004 Tahoe boat trailer

asked by: Stephen A

0

Expert Reply:

The UFP H-1377 correlates to a Dexter #84 spindle, which is for a 3,500 pound axle. This will utilize an inner bearing # L68149 and an outer bearing # L44649. As this is being used on a boat trailer, I highly suggest going with the etrailer.com # AKIHUB-545-35-G-EZ-K. This is galvanized and will be the best option available for your trailer. This also includes both the inner and outer bearings, the grease seal, the grease cap, and the lug nuts.

expert reply by: Lazer S

0

Answer 1

First, it does sound like, based on the measurement and information you have provided, that race #L68110, is correct since its outer diameter is 2.327 inches. This race is associated with bearing #L68149 which has an inner diameter of 1.378 inches…

view full answer...

Answer 2

The Easy Grease Trailer Idler Hub Assembly for 3.5K Axles part #AKIHUB-545-35-G-EZ-K is a direct replacement for a UFP H-1377.

view full answer...

Answer 3

I would not be able to tell you what replacement you need based on the information you gave but there is a way for you to find out what replacement hub will work for you. In order to find the correct replacement hubs for your trailer, you need to…

view full answer...

Answer 4

Overpacking the trailer hub with grease is the number one reason for grease seal failure. For a boat trailer I would recommend re-packing the hubs by hand with grease once per season and you'd be fine. I don't like recommending people use…

view full answer...

Answer 5

We don't carry the 2x2 inch square axle in that length. We carry the Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs #T3584F-EZ-8974 which is the comparable round axle which will work just fine. You simply will use the…

view full answer...

Answer 6

We don't have a kit already put together but we can get you exactly what you need. You will simply order the following items to get this job done. 2- Titan Disc Brake Assembly - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs part…

view full answer...

Answer 7

The closest spring we have to that is part #e46SR which is a 6,000 pound 1-leaf spring but it measures 25-1/4 inches long. If your 26 inch spring is old and flattened out then there's a good chance part #e46SR is what you need because your old…

view full answer...

Answer 8

Thank you for the information. As long as the spring is of the correct weight rating and size, the number of leaves in a spring (spring pack thickness) isn't important. This is especially true because all springs should be replaced at the same…

view full answer...

Answer 9

Please refer to the linked FAQ article that concerns converting from drum to electric-over-hydraulic disc brakes. This explains all the components required. I have also attached a link that will take you directly to some examples of the disc brake…

view full answer...

Answer 10

First, I do appreciate the specific info, and we can get you the leaf springs, equalizer and bolts. For the leaf springs, since they flatten out over time, sand yours are 26-1/4 inch now, go with 26 inch springs. You didn't mention the weight…

view full answer...

Answer 11

The trailer hub part #AKHD-655-6-G-EZ-K that you referenced has bearings that have inner diameters of 1.25 inch and 1.75 inch. The bearing numbers are #25580 and #15123.

view full answer...

Answer 12

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching