Blue Ox Flat Tow Setup For A 2022 Ford F-250 Super Duty

Question

Question:

What parts are needed to flat tow 2022 Ford F-250 Super Duty

asked by: James C

0

Expert Reply:

We have the perfect flat towing setup for your 2022 Ford F-250 Super Duty!

The Blue Ox Base Plate Kit # BLU56FR has a hidden design that provides a clean, seamless look. The baseplate has a durable steel construction and is powder coated to help resist rust and corrosion.

The Blue Ox Avail Non-Binding Tow Bar # BX7420 has a weight capacity of 10,000 pounds and has non-binding latches that make it easy to unhook the tow bar on any terrain.

The RoadMaster 64 inch Double Hook, Straight Safety Cables # RM-646 have an 8,000 pound capacity.

The Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 allows you to use your Ford F-250 Super Duty's tail lights and wiring system while preventing feedback from your RV.

The Demco Stay-IN-Play DUO Supplemental Braking System # DM86VR will give you an automatic, proportional braking that never has to be removed, replaced, or reset. The DUO activates when your RV brake lights go on and the inertia sensor detects deceleration. The Relay # RM-88400 is required to prevent the towed vehicle's braking signal from overriding the turn signal from the RV when applying the brakes during a turn.

I attached a few installation video links below.

expert reply by: Noah E

0

Answer 1

I am happy to suggest a flat tow setup for your 2012 Ford F-150 Platinum EcoBoost 4x4 super crew. Since your truck is 4wd you are good to tow with all 4 wheels on the ground. You will need to place the transfer case in neutral and engage the four…

view full answer...

Answer 2

For your 2013 Ford F150 Supercrew, the Roadmaster InvisiBrake Supplemental Braking System #RM-8700 or similar install SMI Stay-IN-Play DUO Supplemental Braking System - Proportional #SM99251 are both confirmed to fit your truck. They are a permanent…

view full answer...

Answer 3

There are two methods of installation for the Roadmaster Brake Lite Relay part #RM-88400 that you referenced, open and closed. Most towed cars require the normally open installation method. Ford and Lincoln models with neutral tow kits and most…

view full answer...

Answer 4

I went ahead and checked your owner's manual for your Ford 2010 F-250 super duty, and there are some restraints. The only way Ford recommends flat-towing your truck is if you have the 4x4 model that has an automatic or manual transmission with…

view full answer...

Answer 5

When you use the Demco Stay In Play part #DM86VR in your 1993 Jeep YJ Wrangler you will need to use the brake lite relay part #RM-88400 to prevent the Demco from overriding the turn signals when it steps on the brake.

view full answer...

Answer 6

You can see in the attached videos that the green wire of the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400 gets connected to the white wire closest to the switch on your 2016 Jeep Wrangler while the black wire gets connected farther…

view full answer...

Answer 7

The SMI Stay-IN-Play DUO Supplemental Braking System - Proportional #SM99251 when used on your 2016 Jeep JK will override the turn signal on your Jeep so you will need to add the #RM-88400 relay Kit. I've attached a couple of videos to help. It…

view full answer...

Answer 8

Demco does list in the installation manual for the Demco Stay-IN-Play DUO Supplemental Braking System #DM86VR that newer Ford's may need an additional check valve due to Ford using two vacuum lines, but I called my contact at Demco and confirmed…

view full answer...

Answer 9

Yes, the Demco Vacuum line connector part #DM6257 will install in your 2021 Ford Ranger just like the F-150 you saw when you go to install the Air Force One #SM99209.

view full answer...

Answer 10

Since you have the Roadmaster Bulb and Socket kit part #RM-155 you will need to use the brake lite relay #RM-88400 to use it with the Demco Stay-IN-Play DUO #DM26VR and have all of your taillights function properly.

view full answer...

Answer 11

I attached a diagram that shows where all of the connections of the Brake Lite Relay part #RM-88400 need to be made. Basically the 85 pin gets grounded, 87 gets ran to brake light switch and signal output, 86 runs to a fuse tap, and 30 runs to the…

view full answer...

Answer 12

In order to flat tow your 2022 Ford F-250 you will need a base plate, tow bar, wiring, and supplemental braking system. It looks like you can flat tow your truck as long as you have the 4 wheel drive model. Make sure to consult your owner's…

view full answer...