Will Rhino-Rack Fairing for Roof Racks Fit Rhino-Rack Heavy-Duty Crossbars

Question

Question:

I have a rhino rack 2500 heavy duty roof rail system that is making a ridiculous amount of wind noise over 55mph. My question is do the wind fairings fit the heavy duty square bars? Or only for the flat blade bars?

asked by: Dustin L

0

Expert Reply:

The Rhino-Rack Fairing for Roof Racks # RRRF1 will fit your Rhino-Rack heavy-duty crossbars. However, you will need to use the Heavy-Duty Crossbar Adapter Kit # HD-FK1. This kit replaces the screws with extra-long screws that will allow you to mount it to your crossbars.

expert reply by: Robin H

0

Answer 1

The Rhino-Rack 50 Inch Long Fairing #RRRF4 referenced in your question should work nicely with the 54 inch Rhino Rack Square Crossbars on your 2008 Chevy Silverado. The overall length of the mounting clips, from outside to outside, is right at 43…

view full answer...

Answer 2

We had a similar issue here with an employee here and what he ended up doing was getting a second narrower fairing to attach to the lower section of the main fairing to bridge the gap between the fairing and the roof. Since the Rhino Rack fairings…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 12

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Will Rhino-Rack Fairing for Roof Racks Fit Rhino-Rack Heavy-Duty Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching