Heavy-Duty Crossbar Adapter Kit for Rhino-Rack Ski and Snowboard Carrier, Kayak Carrier, or Fairing

See what our Experts say about this Rhino Rack Accessories and Parts

• Will Rhino-Rack Ski and Snowboard Carrier Fit Exposed Racks Crossbars on Jeep Wrangler
  The Rhino-Rack Ski and Snowboard Carrier # RR573 will fit your Exposed Racks Roof Rack crossbars. The reason the # HD-FK1 adapter is required for the square Rhino-Rack bars like # RB1375B-2 is because of their 1-7/8" height. The Exposed Racks crossbars are only 1-1/4" x 1-1/4" so you won't have a problem installing the ski/snowboard carrier.
  view full answer...
• Is There a Wind Fairing For Rhino-Rack HD Crossbars
  Hey there Joe; I can imagine the Rhino-Rack Heavy-Duty Crossbars # RB1650B-2 are pretty loud, and thankfully there is a fairing you can use. What you can use is a fairing from Rhino-Rack, you'll just need and adapter kit with longer screws. The fairing and adapter are the following: - Rhino-Rack Fairing for Roof Racks # RRRF3 - Heavy-Duty Crossbar Adapter Kit # HD-FK1
  view full answer...
• Will Rhino-Rack Nautic Roof Kayak Carrier 571 Fit Prorack Aero Roof Rack Crossbars
  The Rhino-Rack Nautic Roof Kayak Carrier # RR571 will fit Prorack P bars, Prorack Whispbar, and Prorack WhispbarHD bars right out of the box. For Prorack trade bars you would need a special fit kit, # HD-FK1. If you are not sure which model bars you have then you can measure them to determine fit. The carrier will fit bars up to 3-7/8 inches wide and up to 1-3/8 inches tall right out of the box.
  view full answer...
• Is There A Ladder Rack That Fits 2004 Ford F-150 And 2019/2020 Dodge 2500
  The best ladder rack for you is the Yakima Outdoorsman 300 Ladder Rack with 66" CrossBars for Full Size Trucks # Y01137-Y00410. Luckily, this fits all bed sizes of the 2004 Ford F-150 and all bed sizes of the 2019/2020 Dodge 2500. The crossbars are round 66" bars and the rack has a weight capacity of 300lbs. I attached a demonstration video for you to check out.
  view full answer...
• Lockable Roof Rack and Snowboard Carrier for 2016 Jeep Wrangler Unlimited
  The Rhino-Rack Roof Rack # RRSG59 mentioned in your question for your 2016 Jeep Wrangler Unlimited is not compatible with any key lock system. However, they do have built-in security hardware because the legs can only be loosened by the special tool that comes with the roof rack. This roof rack has a weight capacity of 88 pounds, though you will want to check your vehicle owner's manual for its roof weight capacity. If you would like a roof rack that can be locked to your Jeep with a...
  view full answer...
• Adapter For Rhino-Rack Ski & Snowboard Carrier For 1 Inch Square Crossbars
  Looks like you did a stellar job with the rack, and since the crossbars are 1 inch square, you will need an adapter for the Rhino-Rack ski carrier. So what you will need are the following: - Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards # RR576 - Heavy-Duty Crossbar Adapter Kit # HD-FK1 The reason why is the # RR576 only fits crossbars up to 7/8" tall with its standard hardware, but the adapter kit's longer screws allow it to fit up to 2" tall crossbars.
  view full answer...
  
• What Do I Need to Fit A Rhino-Rack 2 Kayak Carrier w/ Tie-Downs on a 2017 Subaru Outback?
  Since I confirmed that your 2017 Outback has raised rails, you will need to have crossbars for the rails in order to attach the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs # S512-S512X. If your vehicle already has factory crossbars, the Kayak Carrier will fit round, aero, elliptical, and most factory crossbars. Although, if your roof has heavy duty crossbars, you will need an additional Heavy Duty Crossbar Adaptor Kit # HD-FK1 Here are all the parts you need: 1. Thule SquareBar Evo Crossbars...
  view full answer...
• Mounting Options for Rhino-Rack Fishing Rod Carrier RR576F
  The Rhino-Rack Fishing Rod Carrier # RR576F offers multiple installation options. It can mount to a roof rack by clamping around the rack crossbars (round, square, aero, elliptical, and most factory crossbars) or it can be installed in the top channel of rack crossbars like # RRVA126B-2 and # RB1375B-2 using the included T-bolt hardware shown in the photo which slide into the top channel of such bars. Only if used in the heavy-duty Rhino-Rack bars is the Fit Kit # HD-FK1 needed. The standard...
  view full answer...
  
• Will the Nautic 581 Kayak Carrier Work w/ Rhino Rack Heavy-Duty Crossbars?
  Yes, the Rhino-Rack Nautic 581 item # RR581 will work with the Rhino-Rack Accessory Heavy-Duty Bars item # RR43120B but you will need longer bolts. They are the Heavy-Duty Crossbar Adapter Kit for Rhino-Rack Kayak Carrier item # HD-FK1.
  view full answer...
• Is it Possible to Have a Single Crossbar on my Camper with Tracks and a Crossbar Mounted on My Cab?
  For having one 65-inch Rhino-Rack heavy Duty Crossbar on your camper shell's factory tracks and having one mounted on the cab of your 2018 Ford F-150, you need the following parts: For the single HD crossbar on the shell: - 65" Rhino-Rack Heavy-Duty Roof Rack Crossbars part # RB1650B-2 - Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 2 # RRRLT600H - Roof Rack Leg Spacer Blocks for Rhino-Rack Heavy-Duty Crossbars part # RRQMHD05 For the single...
  view full answer...
• Will the Rhino-Rack Ski/Snowboard Carrier # RR576 Fit Thule AeroBlade Crossbars?
  For the clamp-on attachment method of the Rhino-Rack Ski and Snowboard Carrier # RR576, they are not large enough to clamp around the 3-1/8" wide x 1-1/8" tall dimensions of the Thule AeroBlades like the TH7602-TH7602. In order to accommodate the height of the AeroBlades, you need to purchase the longer bolts that come with the adapter kit # HD-FK1. As for the channel-mount option, roof rack and roof rack accessory manufacturers do not typically test their products on top channels of...
  view full answer...
• Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating
  I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out. As for the roof rack for your 2020 Toyota Corolla, here are the parts you need: - Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black)...
  view full answer...
  
• Will Rhino-Rack Fairing for Roof Racks Fit Rhino-Rack Heavy-Duty Crossbars
  The Rhino-Rack Fairing for Roof Racks # RRRF1 will fit your Rhino-Rack heavy-duty crossbars. However, you will need to use the Heavy-Duty Crossbar Adapter Kit # HD-FK1. This kit replaces the screws with extra-long screws that will allow you to mount it to your crossbars.
  view full answer...
• Will Rhino Rack RRRMPHU Multipurpose Holder Work on a Thule WingBar Evo Crossbars
  The channels on the Thule WingBar Evo and Rhino Rack Vortex Aero crossbars are the same size, so you can indeed use Rhino Rack accessories like the # RRRMPHU Multipurpose holder on your Thule WingBar crossbars. If you have a different vehicle that uses the Rhino Rack Heavy Duty crossbars, the # HD-FK1 Adapter kit will be needed, it's sold separately.
  view full answer...
• Will the Rhino-Rack Ski/Snowboard Carrier # RR574 Fit My Factory Crossbars on My 2010 Nissan Xterra?
  When considering the Rhino-Rack Ski and Snowboard Carrier - Locking # RR574, the fitment truly depends on the dimensions of your factory crossbars. Since the carrier mounts to Rhino-Rack Vortex Aero crossbars like the # RRVA137B-2 without any additional adapters, this will be a great baseline. The Rhino-Rack Vortex Aero crossbars measure 3-1/8" wide x 1-3/16" tall, so as long as your crossbars do not exceed these dimensions, the carrier will fit. I recommend you measure the width and height...
  view full answer...
• Rhino-Rack Vortex Aero Roof Rack & Ski Rack Compatibility on 2016 Subaru Crosstrek
  The Rhino-Rack Vortex Aero roof rack system made of parts # RRVA118B-2 and # RRSX100 is a complete roof rack system for the 2016 Subaru Crosstrek that has factory-installed roof side rails that run from front to back. You will NOT need to use the Heavy-Duty Crossbar Adapter Kit # HD-FK1 to install their Ski Carrier # RR574 on the Vortex bars. The kit is needed only when installing the ski rack on their heavy-duty bars like # RB1500. Since the Vortex bars have a T-bolt channel in their...
  view full answer...
• Saddle Style Kayak Carrier That Fits 1-3/4" Diameter Round Bars
  I spoke to my contact at Rhino-Rack and they informed me that the Rhino-Rack Nautic Roof Kayak Carrier part # RR570 will fit the 1-3/4" diameter round crossbars on your Jeep if you use the Heavy-Duty Crossbar Adapter Kit for Rhino-Rack Ski and Snowboard Carriers and Fairings part # HD-FK1. The above kit comes with tie down straps but I also recommend using the Rhino-Rack Anchor Strap part # RRRBAS-2 to further secure the bow/stern of the kayak to the vehicle. I have attached a review...
  view full answer...
• Rhino Rack 576 Replacement Mounting Hardware
  The Heavy-Duty Crossbar Adapter Kit for Rhino-Rack Ski and Snowboard Carrier, Kayak Carrier, or Fairing # HD-FK1 should do the job for you. This adapter kit is confirmed compatible with your Rhino Rack 576 and allows you to mount your ski and snowboard carrier, Nautic kayak carrier, or Rhino-Rack fairing to Heavy-Duty crossbars. The kit replaces the screws that come with your sport carrier or fairing with 8 extra-long screws.
  view full answer...
• Can I Use J-Style Carriers in Conjunction with the Rhino-Rack # RTL002 on My 2016 Subaru Outback?
  Technically, this setup might work. However, there are some caveats. Firstly, the Malone FoldAway-J Kayak Carrier with Tie Downs - J-Style # MAL98FR is not confirmed to be large enough to clamp around the crossbars of the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar for 2" Hitches # RTL002. For this reason, I recommend using one of the Rhino-Rack 2 Kayak Carrier w/ Tie-Downs - J-Style - Folding # S512-S512X instead. This j-style carrier is confirmed to fit larger crossbars...
  view full answer...
• How High Above Crossbar is Rhino-Rack Ski and Snowboard Carrier RR576
  While there is not a riser, I do have the measurement above the crossbar for you of the Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards # RR576. The # RR576 has 3-5/8" clearance above the crossbar for your bindings, and then you can add whatever height you have from your roof to the crossbar on top of that to get the overall clearance. As for your other question regarding the bolts, you are 100 percent correct, for a 1" tall heavy-duty crossbar, what you need...
  view full answer...
• Front & Back Hitches With Accessories For Ultimate Mercedez-Benz Sprinter Van 3500
  The Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR is definitely the move for you, but if you plan on putting it in the front of your 2017 Mercedes-Benz Sprinter 3500, you'll need a front hitch # 306-X7352. For the back if you have a factory step bumper you'll need this hitch # 75601 and if you have a Standard bumper you'll need this one # 75549. In order to use the Yakima EXO Swing Away Enclosed Cargo Carrier # Y62VR you'll need a class III hitch or higher. If you wanted to...
  view full answer...
• Will the Rhino-Rack Fairing Work With the Rhino-Rack Heavy Duty HD Crossbars?
  Yes, you can use the Rhino-Rack Roof Rack Fairing # RRRF4 with your HD rectangular crossbars, but you will need to purchase the Heavy Duty Crossbar Adapter Kit, # HD-FK1. This kit includes the longer bolts necessary to attach the fairing to the taller HD bars.
  view full answer...
• Is There Adapter to Fit Rhino Rack Fishing Rod Carrier on 2 inch Diameter Crossbars
  The Rhino Rack Fishing Rod Carrier # RR573F can fit on 2 inch diameter crossbars if you use the Heavy-Duty Crossbar Adapter Kit # HD-FK1. This basically gives you longer bolts for the mounting brackets so they can fit the larger diameter bars.
  view full answer...
• Cargo Basket Fit for Nissan Xterra with Factory Crossbars
  In my research, I could not find standard specifications for crossbars when I looked in the Xterra's owner's manual. We have a Xterra in our shop today, and when I measured the crossbars, I agree with you that they seem to be approximately 3-1/2 by just over 1-3/16. The shape of the bars makes them a bit difficult to measure. With the crossbars on your 2010 Nissan Xterra at 3-1/2 inches wide, then the Curt Roof Cargo Carrier # C18115 will not be a fit for your crossbars. This cargo carrier...
  view full answer...

Do you have a question about this Accessories and Part?