Parts Needed to Use Yakima Round Bars on 2013 Toyota Prius c

Question

Question:

Hello, I have a 2013 Toyota Prius C with a bare roof and I would like to use as much of my old Q system roof rack as possible. Ideally I would just buy the proper Q clips but this has been challenging because Im finding it difficult to even figure out which ones I need. If that scenario turns out to be impossible I think I might have to buy new towers clips and round bar adapters at the minimum to fit my bike racks, including a sidewinder. Can you please give me the information I need to buy the proper parts? I was told that the Q clips might only be available on eBay but again, I dont even know which clips to look for. Im thinking I will have to buy a new base system minus the crossbars. Thank you, 2013 Toyota Prius C with naked roof

asked by: Hans H

0

Expert Reply:

Sometimes we are able to find older Yakima fit info but I checked and they do not have a Q clip setup for the 2013 Toyota Prius c so the only option we have would be a new rack that would allow you to use your round bars. The complete rack for your vehicle consists of:

BaseLine Towers for Yakima Crossbars # Y00146
BaseClip Fit Kit # Y06135
BaseClip Fit Kit # Y06179
Round Bar Adapter # Y03536

expert reply by: Jameson C

0

Answer 1

Yakima does have a JetStream roof rack confirmed as a fit for your 2019 Kia Sorento with a naked roof with the part numbers #Y00425, #Y28TR, #Y06159, #Y06170. The Jetstream bars are really nice as they are aero shaped and have a channel that runs…

view full answer...

Answer 2

The part you need is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2, part #Y06179.

view full answer...

Answer 3

I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack…

view full answer...

Answer 4

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

The Yakima SightLine Towers #Y64AR and RidgeLine Towers #Y00145 are very similar. The main differences is the SightLine is slightly shorter by 1/2" at 3" tall. Also the SKS Locks #Y07204 is hidden behind the outer cover on the SightLine…

view full answer...

Parts Needed to Use Yakima Round Bars on 2013 Toyota Prius c

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching