Yakima SightLine Roof Rack for Flush Rails - RoundBar Crossbars - Steel - Black - Qty 2
(197 reviews)
Price: $578.80
Yakima SightLine Roof Rack for Flush Rails - RoundBar Crossbars - Steel - Black - Qty 2
Item # Y75ZB
Our Price: $578.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (197)
- Q & A (0)
- Videos (81)
- Photos
Yakima Roof Rack - Y75ZB
- Round Bars
- Crossbars
- 58 Inch Bar Space
- Yakima
- Black
- Overhang
- 2 Bars
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.
Features:
Yakima RoundBars - 58" Long - Black - Qty 2:- Sturdy, round crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack
- Accommodate accessories that clamp around the bars
- Constructed from vinyl-coated, galvanized steel
Yakima RoundBar SL Adapter:
- Adapters let you mount your Yakima RoundBars on BaseLine, SkyLine, TimberLine, or RidgeLine towers
- Easy installation - adapters slide onto bars and attach with bolts (included with towers)
- 4 Adapters and 4 RoundBar endcaps included
Yakima SightClip 55:
- Custom-fit clips and pads allow you to mount 4 SightLine or RidgeLine towers on your vehicle with flush, factory side rails
- Inner and outer clips tighten together with a single bolt for even, secure grip on rails
- Snap into place on DropHooks inside towers
- Powder coated stainless steel clips are durable and rust resistant
- Molded rubber pads fit the contour of your side rails
- Clip onto bottoms of towers
- Protect side rails from scratches and abrasions
Yakima SightLine Towers - Qty 4:
- 4 Low-profile towers mount Yakima crossbars to your vehicle with flush, factory side rails
- Pair with 2 Yakima crossbars and SightClips or RidgeClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases automatically adjust during installation to ensure towers are seated correctly
- Safe and easy installation with included torque tool
- Clip holder adjusts on 3 axes for perfect fit on your flush rails
- SightClips or RidgeClips attach to hooks in tower assemblies and tighten together for even, secure grip on rails
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Durable, weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction
8000409 Yakima Round Crossbars - Steel - Black - 58" Long - Qty 2
8003536 RoundBar StreamLine Adapter for Yakima Base Line, Sky Line, Timber Line, and Ridge Line Towers - Qty 4
8006455 Custom Sight Clips and Pads for Yakima Sight Line and Ridge Line Towers
8001635 Yakima Sight Line Roof Rack Towers - Qty 4
Replaces Yakima RidgeLine Y00145
Video of Yakima SightLine Roof Rack for Flush Rails - RoundBar Crossbars - Steel - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima JetStream Crossbars Roof Rack Installation - 2022 Mazda CX-9
Hey everybody. Cooper here at etrailer. Today we're going to be taking a look at our Yakima roof rack system and how to install it. It does come in three major components that we'll get into as we start to talk about 'em on our 2022 Mazda CX9. Now if you wanna carry around some of those longer items like skis or snowboards, maybe need some additional storage like your rooftop cargo basket, or just wanna keep some of those dirtier items outta your car like mulch or maybe fertilizer. The first thing we're going to need for all those accessories is a roof rack system.
The first component we're going to look at in our roof rack system is going to be our crossbar here. Now our crossbar is going to be the Jet Stream Yakima crossbar which just means it has this nice arrow design to it where kind of starts a little fatter in the front and tapers off towards the back. Now this is just to help with some of that wind drag and noise that usually comes with putting stuff on top of your roof. It's going to be made of aluminum, which just means it's going to stay lightweight and very rustproof as we take our roof rack through the elements. And we even do have a T track here up top and it's my favorite kind of T track where if you want to install accessory you just have to push it kind of down and set it to wherever you need.
We're not going to have to pull up our wind strip and cut it to different specs. A nice way that our crossbar does interact with our CX9 is that there is plenty of space here in case we wanna use any clamping accessories between our roof and our crossbar that they just fit right through. Don't have to worry about damaging your roof at all for that to clamp down. Also coming down to the bottom of the crossbar if you can see that there is no wind strip, your kit will come with one. But because there is no permanent installation on this we have opted not to put our wind strip in today.
Then it does fit nicely into our sightline tower here which is just what's going to be kind of the mid piece between our crossbar and our fit kit. It does have this plastic covering when you're all done. That just pops right off. Now all of our inner mechanisms and tie-down points are gonna be behind this guard which is kept in place by this plastic lock core which is just used by a flathead screwdriver to kind of unlock and lock. But you can replace this with the sand key system for Yakima, which is a metal lock core using a key in case you have any other Yakima products or just want to upgrade to a key system instead.
The last piece to talk about in terms of our overall roof rack system is going to be the fit kit which is going to sort of have that custom molding to our vehicle. You can see that there's a hole right here. There's actually one right behind our fit kit as well and there's a little piece of rubber that you'll be able to see during the install process that really helps secure it all down. And looking on the outside here too our clamp does kind of fit into a little ridge on top of our CX9 system. So overall it just allows our roof rack system to have a really secure and custom fit to our CX9. Speaking about our system overall, our crossbars are 50 inches here which I think do sit really nice and flush here with our CX9. But I think if you did want to go up to the next size just to get some more usable space if you have a lot of accessories you wanna carry around or just want more easable access to something like rooftop cargo bags, that would be possible. The only thing is remember as you go farther and farther out from your vehicle the more dangerous it is kind of getting in and out making sure you don't hit your head. Now the install process for this roof rack system is pretty involved. It might be a little time consuming but as long as you're patient and follow the step-by-step guides in the instruction you might still find yourself running to a couple of snags. But thankfully we're gonna show you how that install process works right now. Now the first thing we're gonna need to do is set up our legs so they can go onto our crossbars. Now this is how it's going to come out of the kit. So the first step is going to be that we're going to need to remove this outer shell here revealing its inner one, and we're going to go ahead and take our flathead screwdriver and unlock this which just does expose all of the internals. We're going to need to take our included Yakima tool and unscrew this right here. And that will reveal secret door that we're gonna point out later. And then we're gonna go ahead and unscrew this a little bit ahead of time because this is where we are going to set up our clamps on. And then if we flip this over we can see that this by unscrewing that first bolt this is the little secret door that we have revealed that is going to be for the top of this guy right here. We are going to go ahead and take our plastic piece here, kind of just make sure that it's centered up with that and then drop in this piece which is going to be what secures our leg to its crossbar. You just kind of have to jiggle that into place holding it in place, flipping this around and then taking our included Yakima tool and tightening it down just a little bit so that way they become secured to each other but not enough that we can't fit it into our crossbar. Now that our legs are ready we can install them on our crossbar. Looking at our crossbar we have an arrow crossbar here today which means it's gonna be a little bit fatter in the front and kind of taper off towards the back. That's going to be the easiest way to tell you which way is the front and back. But we're gonna go ahead and flip it over. And we went ahead and marked an arrow facing towards the front, which really helps us whenever we have to install using this crossbar. So if you're looking for something to help you out that could be a good idea as well. Taking off our end caps here on both sides we are then going to go ahead and grab one of our legs and then we are going to use the included measuring strips on here that you may or may not be able to see. They're kind of difficult. And then we are going to go ahead and take our included leg here, slide that in. And our measurement is 38 and seven eighths. So we're gonna go ahead and find that on our strip and making that measurement line up with the back of our leg. And now we can go ahead and take our include Yakima tool and tighten them down a little bit but we don't wanna tighten them down all the way 'cause we still need to set the pitch. So taking a look at the leg of our crossbar system we can see the little bolt down here. So what the pitch basically means is we go ahead and push our tower towards the front of our crossbar. This is going to be the A positioning, B is going to be with it kind of sitting in towards the center. And C is going to be if we move the bolt towards the back. Now the measurement here and the pitch can be different depending on the system and your vehicle specifically. So make sure that you are checking which ones you are going to need. And this case we are going to need the C so we're gonna go ahead and take our included tool and tighten it down in this position. Now with our legs installed, we're going to go ahead and put our pieces in that make up our fit kit. The first one is going to be this pad here that actually has the same number regardless of of it's the front crossbar, the back crossbar, left or right. They all have the same code on them. We're going to go ahead and take it, making sure that our arrow is pointing out of our crossbar and come to about the middle of our crossbar here where we'll be able to see where it's going to just clamp right down into place. You'll hear a little click. That'll let you know that you did that right. (click) The next one we are going to do is going to be one of the sides of our clamp and we need to go ahead and take our fingers real quick and remove the retaining clip right here. And then this guy should just slide right in. (clanging) But you may find yourself needing to loosen it up a little bit with that same bolt that we did earlier if it's giving you a little bit of trouble. (clanging) There we go. And then we should be able to fit our piece around those hooks down there and then when we give it a good tug up you'll notice that it is in place and then we'll go ahead and replace that back in. Now if we come over to the front you'll see a very similar system that we just go ahead and pinch and we'll have go ahead and loosen that up. And for this we actually want to tighten this bolt back down because we are going to be fitting this between this hole right here, which means that if we don't tighten down this bolt that our clip is not going to be able to get past that. The process is going to be the same over on this side here. I did just wanna go ahead and point out that our clip here, R9, is going to be the one that sits inside our inner crossbar and our clip R14 is going to be the one that sits outside of our crossbar. which is designated in the instruction manual. Now that our crossbar is ready to go we're gonna have to know where to put it. So by taking a soft tape measure we're going to start at the front of our front crossbar. And since we already took measurement out of our construction manual we're gonna know that that's 28 inches. We're gonna go ahead and mark that. And then reaching over here to zero, we know that this is going to be where the front of our rear crossbar starts. Now your kit is going to come with some stickers to temporarily place here for you to mark that, but since we don't have those, I'm just gonna go ahead and make a little mark with my finger knowing that's where the spot is that I have to come back to. One nice thing about our crossbar system is that one of our clamps here has a little bit of a nub on it that will actually fit into one of the holes on our rail system. So that's just nice to know as kind of a secondary measurement that you know you're placing your rails in the correct spot. And try to line it up with your mark the best you can. But make sure that you go ahead and check the other side, make that measurement, and maybe double check your measurement over here after you move that side a little bit to make sure that you didn't accidentally move your first side. Now that we've checked the measurement for our crossbars on both sides and know they're in the correct place we can go ahead and tighten them down. Now if you are doing this by yourself, you wanna go ahead and choose one side and maybe only tighten it down about 50%, then go around to the other side and do that kind of back and forth increasing in value because if you do it completely on one side, you'll end up pulling your system all one way. And we don't want that. We want it to be evenly distributed. So we are gonna go ahead and just tighten this down a little bit, until maybe we can start to feel some of that resistance. And we'll know once we are at the correct setting because our included tool is actually a torque tool, which will not allow us to tighten down anymore once we are at that appropriate setting. Now that our roof rack system is in place we're gonna go ahead and put all our covers back. The first one is going to loop around this little point right here. And swing around. There you go. And once you have that in place, we're gonna go ahead and take our flathead screwdriver that we used earlier to lock that into place. So putting our final caps on, this one just fits right on the front, (snapping) and snaps right into place. And then do not forget the one on your crossbars. And then go ahead and make sure you do this for all four of 'em and then go hit the road. Now overall I do think our Yakima roof rack system looks pretty good on our 2022 Mazda CX9. Once it's up there, I think it looks very sleek and it'll help you carry around some of those additional accessories that you're wanting to. The installation process, like we said before, is pretty involved and can be tricky at times, but if it's something that you find yourself just setting up or getting on your roof and never having to take off, it's not that big of a deal that it's only gonna be that first time installation, really setting everything up that's kind of a pain in the butt. But once you get through all that I think that's a really good option for us. But that was a look today here at our Yakima Roof Rack System on our 2022 Mazda CX9. My name's Cooper and thanks for watching.
Customer Reviews
Yakima SightLine Roof Rack for Flush Rails - RoundBar Crossbars - Steel - Black - Qty 2 - Y75ZB
Average Customer Rating: 4.8 out of 5 stars (197 Customer Reviews)
These multipurpose, galvanized steel crossbars supply the backbone for your aftermarket roof rack system. Works with accessories that clamp around the bars. Pair with Yakima towers, fit kit, and RoundBar SL Adapter to create a complete roof rack.by: Charles02/09/2024
Toyota 4Runner
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs!
As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!
by: John K08/17/2012
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
by: Jonathan05/24/2024
Works well, after getting them in place. On my Kia Sorrento it's very tricky to get the towers to fit the holes in the factory rails -- takes a lot of loosening and readjusting the bars.
by: TimN03/19/2024
Works perfectly. I am always impressed that Yakima continues to make parts for the "old roundbars" since they have since moved on to the superior JetStream bars.
by: J-fan05/04/2024
Excellent selection of rack parts. Very useful installation videos help when choosing between products. Easy ordering process. Quick delivery.
by: 04/01/2024
necessary for using the widest cross bar option (78"). East to install
by: Paul D.08/19/2012
A great company to do business with, and lots of merchandise in stock. I orderd a roof rack for my truck on Tuesday morning and it was on the porch when I returned from work on Thursday. I will deffinitely order more from etrailer.com
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: Debra09/10/2023
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
by: Robert 02/06/2024
My only complaint is the time it took to get my order. I understand this was out of your hands and dependent on supply problems.
by: Pat G08/29/2013
Great first experience dealing with you guys! Shipped fast, and was a faster install. You gave me the right parts and it went together in a flash.
Will definitely be doing business with you all again.
by: Jerry F04/23/2023
I have been using Yakima racks for around 40 years and have never had any problems. However, I am amazed at the price increases over the years. Etrailer prices were by far lower than most. Overall, a very excellent purchase.
by: Jay07/31/2023
Subaru Forester
Kit worked perfectly on my 2021 Subaru Forester. The whole install took 30 minutes. Never been disappointed with etrailer.
by: Roland01/08/2024
Haven’t used them yet but they should work as expected
by: Adam K05/14/2023
Pretty straight forward installation. Instructions were easy to follow.
by: SueCanoe02/10/2023
I'm happy that this allows me to save money by using my old round bars on my new vehicle, with only the purchase of new "towers" and these adapters.
by: Peter07/29/2023
first try was missing what was needed
Etrailer helped. It was great!
by: Kenneth 03/02/2023
E trailer has me me spoiled yet again! If only I could expect this level of service from other suppliers.
by: Gary 04/01/2023
Works great to use my round bars on the Skyline towers.
by: Stephen F.07/23/2019
Yakima Crossbars were as you would expect - steel bars coated in a soft black coating (be mindful when you are utilizing these with the top mounts as the clamp will eat through the soft coating when you tighten them down). I had issues with my yakima round bar setup as the brackets and tower system were allowing water to leak in. This is in no way reflective of what youll experience but Yakima has superb support. I spoke with them twice on my issue and out of their kindness they shipped me an entire setup to replace my existing one for free.
by: Nick09/21/2017
Product works as advertised thus far. When you buy the yakima towers, you are required to purchase these as well to fit the rounder bars (I feel sure there are other adapters for other bar shapes). These should have come with the towers in my opinion, and I resented having to shell out more $$ to purchase these "must have" adapters to mount my bars. 3 star overall rating based on function, price. Delivery and packaging was top-notch through etrailer.
by: Lawrence B08/17/2017
Toyota Prius
I ordered a Yakima Roof Rack for my Toyota Prius from eTrailer.com. Part of the reason for purchasing from eTrailer.com was the promise that the racks were made specifically for the car and would not dent the roof.
I received the rack on July 31, and installed the racks on my Prius according to instructions included with the racks. Our tandem kayak is 65 lbs . The towers were placed on the outer most part of the roof as indicated by the instructions. Yakima saddles were attached to the crossbars to hold the kayak. Nothing was close or touching the top of the roof. We transported the kayak to a nearby lake, 6 miles, and back. The next day we removed the racks from the roof and noticed 4 dents on the top of the roof. It was obvious that transporting the kayak on the rack caused the dents.
We had to pay $100 to have the dents removed from the Prius roof.
I cannot continue to use this rack that puts dents in the car's roof. I was extremely disappointed in the racks. In reading the Toyota manual and contacting them by phone, there is no mention of using or not using roof racks.
I was shocked to learn from Rachel at eTrailer.com that your company takes absolutely no responsibility for this Yakima product they sell. The best they can do is to pass the buck and refer us to Yakima.
Very disappointed, and out a lot of money for a product that damages your car. Will not recommend or buy here again. eTrailer.com does not even deserve one star in this review.
by: John04/13/2019
Typical Yakima cross bars. Coating is a little too easy to cut or gouge, but probably needs to be that way to get the grip it provides. Good enough solution for me, and allows me to continue to use all the attachments I've accumulated over the years that require a round bar
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.
by: Nicholas07/11/2023
Order was easy to place and delivered in less than a week as promised. The sales advice was perfect fit despite multiple pieces having been ordered. Used the rack once and very sturdy
25
436
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- Will Yakima 48-Inch Roof Rack Crossbars Fit the 2013 Dodge DartThe Yakima roof rack component that you referenced, part # Y00409, is a 58-inch bar that is part of a complete rack system that fits the naked roof on your 2013 Dodge Dart. Installation of this system on your vehicle is shown in the linked video. Crossbars that are 48-inches will not be long enough for your vehicle. The shortest crossbars that will work on your Dart are the 50-inch size. No matter which rack you choose you will want to verify in your owners manual (or with your local...
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2021 Ford EdgeYes we have the parts needed to install a round bar Yakima roof rack on your 2021 Ford Edge that does not have rails or a glass roof. You'd need the following # Y28TR, # Y03536, # Y06102, and # Y06139 since you already have the # Y00409.
view full answer... - Roof Rack and Kayak Carrier Recommendation for 2015 Chevy Silverado 1500 with A.R.E. Camper ShellSince the A.R.E. camper shells have tracks mounted on top of them you can use a Yakima round bar roof rack which will require 4 of the Yakima Control Towers # Y8890027, 2 sets of the Yakima Landing Pad # Y00221, and one set of Yakima Crossbars. For 58 inch bars you can use # Y00409, for 66 in bars use # Y00410, or for 78 inch bars you can use # Y00411. Also keep in mind that the bars can be cut to fit your exact need. The rails on this camper shell are made by Yakima, so this will give...
view full answer... - Compatibility of Yakima Roof Rack System with Dual Sun Roof on 2012 Hyundai SonataAccording to our friends at Yakima, they offer a roof rack system compatible with your vehicle that can be constructed using the following parts: Round 58 inch CrossBars, part # Y00409 BaseLine Towers, part # Y28TR Round Bar SL Adapter, part # Y03536 BaseClip Fit Kit, part # Y06144 BaseClip Fit Kit, part # Y06153 The towers will sit just above the doors, and will be located to the outside of the roof edge molding. Therefore, they will come into contact with the metal portion of the roof,...
view full answer... - Correct Yakima Towers for a 2023 Toyota Sequoia The towers compatible with your 2023 Toyota Sequoia is going to be those TimberLine Towers for Yakima Crossbars # Y33TR. These towers will work with Yakima's JetStream # Y00426, HD # Y01157, CoreBar # Y00422, and RoundBars # Y00409.
view full answer... - Will The Thule Complete Crossroad Kit Fit My 2008 Jeep Factory RailsThe Thule roof rack is a custom fit for your Liberty consisting of the Evo Raised Rail Feet # TH710401 and 53" WingBar Evo Crossbars # TH711420 and locks # TH450400. We also have the Yakima TimberLine Towers, parts # Y03536 and # Y33TR, which will work with the Round 58 inch CrossBars for Yakima Roof Rack Systems, item number Y00409, to put rails on your Jeep.
view full answer... - BaseClips for Yakima Baseline Towers and RoundBar Crossbars on a 2023 Ford MaverickThe correct clip kit for your 2023 Ford Maverick with naked roof to use the Yakima RoundBar Crossbars # Y00409 and the BaseLine Towers for Yakima Crossbars # Y28TR with the RoundBar SL Adapter # Y03536 is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180.
view full answer... - Recommendation on a Yakima Roof Rack and Cargo Carrier for a 2016 Mazda CX-5 Naked RoofYour 58 inch Yakima Round Bars, # Y00409, will fit your 2016 Mazda CX-5 as long as you use the correct towers and hardware to install on your Mazda's roof. The towers you will need are the Yakima BaseLine Towers # Y28TR as the Q Towers have been discontinued. You will also need the Round Bar SL Adapters # Y03536, BaseClip Fit Kits # Y06130 and # Y06132. The Yakima SkyBox 18 Cargo Box # Y07336 will work great with this roof rack but we'll need to check to see if the 57" front bar to rear...
view full answer... - What Size Screw is Required for 2012 Mazda CX-9 Roof Rack?If you are looking for the screw size for the factory mount locations, you will use M6 screws that are 35 mm long which come in the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points # DK289. For a roof rack, I recommend this fit kit along with the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 and the 2500 Series Legs # RRRLKVA. Since you asked from a Yakima bar, the Yakima fit kit uses M6x28mm, M6x33mm and M6x40mm hardware as well as M8x35mm. These...
view full answer... - Wider Spread Roof Rack Recommendation for 2015 Toyota Venza with Naked RoofThe only wider crossbar roof rack we have available for your 2015 Toyota Venza is the Yakima part numbers # Y00409, # Y28TR, # Y03536, # Y06129, and # Y06131 that you mentioned which has 33 inches of crossbar spread. Most Thule roof accessories that are designed for square bars are also designed for round bars so this should still work great for you.
view full answer... - What is the Roof Weight Limit of the NuCamp TAB 320? I have a great solution for you. I went ahead and called my contact at NuCamp, and he confirmed that your 2021 NuCamp TAB 320 has a maximum weight capacity of 60 pounds (on top of the Round 58" CrossBars for Yakima Roof Rack # Y00409 where they attach on the camper). However, the Yakima Roof Rack # Y00409 has not been confirmed to fit your 2021 NuCamp TAB 320. For this reason, I recommend the Swagman Roamer LT Roof Rack for Pop-Up Campers and Camper Shells # S80510. The Roam LT Roof Rack...
view full answer... - Parts Needed to Complete Yakima Roof Rack on a 2008 Toyota TacomaSince it looks like you have a Q-towerYakima crossbar setup you would only need the correct fit kit so that it could install on your 2008 Toyota but the clips for those towers are no longer available. Instead you will use the following: BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06125 and # Y06128 Hopefully the crossbar is at least 58 inches long. Otherwise you would need the part # Y00409 as well.
view full answer...
- Roof Rack Recommendation for 2003 Ford F-150 SuperCrew CabFor a roof rack confirmed to fit your 2003 Ford F-150 SuperCrew Cab the Yakima part numbers # Y00409, # Y28TR, and # Y00714 would be a confirmed fit that would work well.
view full answer... - Yakima Roof Rack that Fits Roof Tracks on Leer Truck CanopyI spoke to my Yakima contact and he informed me that you will need the Landing Pad 1 # Y00221 for the tracks on your Leer camper. To complete your roof rack setup you will need: quantity 2 of the Landing Pad 1 # Y00221 quantity 4 of the Control Towers # Y8890027 and depending on the length of your cap quantity 2 Crossbars like: 48 inch # Y00408 58 inch # Y00409 66 inch # Y00410 78 inch # Y00411 To lock your roof rack to your tracks, I recommend the set of 4 lock cores with keys # Y07204.
view full answer... - Mounting Brackets for Yakima Raingutter Towers for Roof Rack on TrailerI believe I understand the part you are asking about to install a Yakima roof rack on your trailer, which is the Side Loader Mounting Brackets for Yakima 1A Raingutter Towers # Y08002. Then to complete your set up you will need the Yakima 1A Raingutter Towers # Y00101 as well as the appropriate length crossbars for your trailer, depending on its width. The options are the following: - 48 Inches: Round 48" CrossBars for Yakima Roof Rack System # Y00408 - 58 Inches: Round 58" CrossBars...
view full answer... - Roof Rack for Carrying Canoe With 2008 Chevy SilveradoWe do offer clamps designed to attach the roof rack feet to the vehicle, but I could not recommend altering a roof rack in any way. Altering an existing assembly would have unknown effects on its weight bearing ability, which wouldn't be safe. Rhino Rack offers an inexpensive yet strong rack system that consists of the # RRVA137B-2 crossbars, # RRRLKVA legs, and the # DK227 vehicle-specific clamp kit. This would provide a stable and strong rack for your canoe. I'd also suggest the Malone...
view full answer... - Best and Quietest Snowboard Rack for a 2014 Acura MDXTo carry up to 4 snowboards on your 2014 Acura MDX I recommend using the Yakima FatCat EVO 6 Rooftop # Y03096. This carrier has a low-profile design that will reduce drag and wind noise. This system will attach to your factory roof crossbars, if equipped. But, if your 2014 Acura MDX does not have factory installed roof rails or a roof rack system then you will need a roof rack system. I recommend the Yakima roof rack consisting of parts # Y00409, # Y28TR, # Y03536, # Y06150, and # Y06105....
view full answer... - Will Installing Track Roof Rack System on A.R.E. Topper Void WarrantyInstalling a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
view full answer...
- Parts Needed to Install Yakima Round Bar Roof Rack on 2017 Nissan Rogue with Raised Roof RailsFor the raised side rails of your 2017 Nissan Rogue you would need the Yakima Timberline Towers part # Y33TR to attach your Yakima round bars. Then for the adapter for these fit to allow the install of your round bars you'd need the part # Y03536. The recommended bar size then is the # Y00409.
view full answer... - Roof Rack Recommendation for a 2011 Ford Flex and Importance of Following Fit MeasurementsYakima is pretty particular about where you install their roof racks on the roofs of vehicles. I cannot safely recommend you install the bars in a different location than what they recommend. This would void the warranty of the rack and would cause it to have an unknown capacity. Part of why they recommend certain areas of the roof for their racks is based on the structural strength of the roof. Typically with roof racks installed the wind noise created is loud enough that most people...
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Will Yakima FrontLoader Fit on Factory Crossbars of 2017 Toyota TacomaAs long as the crossbar spread on your 2017 Toyota Tacoma is between 16 inches and 48 inches the Yakima FrontLoader part # Y02103 will fit and work well. If you have raised rails on the roof of your truck and need crossbars that run left to right you'd also need the roof rack # Y00409, # Y03536, and # Y33TR and you'd be set.
view full answer... - Which Yakima Cross Bars and Front Fairing Will Fit 2007 Jeep Grand CherokeeThe Yakima cross bars that will fit 2007 Jeep Grand Cherokee are the Yakima Round 58 Inch CrossBars for Yakima Roof Rack System, part # Y00409 which comes with 2 cross bars. Part # Y00409 will mount to Yakima TimberLine Towers, part # Y33TR, and the RoundBar SL Adapter # Y03536 which you referenced in your question.
view full answer... - Roof Rack Recommendation for a 2013 Jeep Wrangler UnlimitedWe have a few different roof rack options for your 2013 Jeep Wrangler Unlimited. Two roof racks that I recommend looking at is the Yakima round bar roof rack or the Thule square bar roof rack systems for hardtops. It appears that your Jeep has a hardtop in the photo you provided. The Yakima roof rack consists of the following: 58 inch round crossbars # Y00409 Yakima 1A Raingutter Towers # Y00101 The Thule roof rack consists of the following: 60 inch SquarBars # TH712500 Rapid Gutter...
view full answer...
- Can I Put 70" Yakima JetStream Bars On A 2024 Kia Niro PHEVYou absolutely can put your Yakima JetsStream bars on your 2024 Kia Niro PHEV with factory flush rails. To do so you will need the following parts: SightLine Towers for Yakima Crossbars # Y64AR SightClip Fit Kit for Yakima SightLin3 Towers # Y27AR Since the mounting channel on the Yakima crossbar runs the full length of the bar, you can mount virtually any size crossbar on your roof. That said, we recommend a 50" bar # Y00428 for the Kia Niro. So while your 70" bars will still fit, there...
view full answer... - What is the Best Crossbars and Roof Rack for a 2024 Acura MDX w/ Flush Side Rails?Congrats on the new vehicle! To add a set of crossbars to the side rails on the roof of your 2024 Acura MDX, I recommend the roof rack by Yakima which requires the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR
view full answer... - Recommended Roof Rack for a 2023 Acura MDX w/ Flush Side RailsTo add a set of Yakima Jetstream crossbars to the raised rails on the roof of your 2023 Acura MDX you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y49AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204...
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer...
- Is The Malone FoldAway Carrier Compatible With Subaru Outback Factory Crossbars From what I can find in the online owner's manual Subaru just doesn't want you exceeding 150lbs with the factory crossbars, which is same capacity for the Malone FoldAway-5 Kayak, Canoe, and SUP Roof Rack # MAL38FR that you were looking at. They aren't really descriptive with the shape or dimensions of the factory crossbars so you'll want to ensure that they fall within the requirements of the # MAL38FR, which I have pictured below. If your crossbars fall outside of these requirements...
view full answer...
- How To Carry Skis and Snowboards on a 2017 Lexus NX 200t With Flush Side RailsSo long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis. For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories. For a roof rack mounted ski carrier, I recommend the Yakima FatCat...
view full answer... - Picking Between 50 and 60 inch Yakima Jetstream Roof Racks for 2021 Kia TellurideGoing with a longer crossbar does give you more space to mount roof accessories and carriers but the longer bars do tend to get in the way a little more and create a little more wind noise. So really it comes down to considering how many things you plan to carry on the roof rack and how wide they might be. Now that said the 60 inch Jetstream rack Yakima offers part numbers # Y00426, # Y28TR, # Y06125, and # Y06165 is the correct rack for if you have a naked roof and the 50 inch rack part...
view full answer... - Recommended Roof Rack for a 2024 Kia Niro EV w/ Flush RailsI sure can! To add a roof rack to the flush rails on your 2024 Kia Niro EV, I recommend the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System...
view full answer... - What Do I Need to Mount a Cargo Box on a 2020 Hyundai Palisade?In order to have a cargo box on your 2020 Hyundai Palisade, you will need a roof rack system with crossbars in order for you to mount the box and cargo. Compatible systems depend on whether your vehicle has a bare roof or flush factory side rails. If your vehicle has a bare roof, I recommend the following parts: - Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2 # Y00422 - BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR - BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Roof Rack Recommendation for a 2023 Honda CR-V with Flush RailsThule currently (March 2023) doesn't have a roof rack fitment for your 2023 Honda CR-V but I do have an alternative option for you through Yakima with their SightLine System: - 50" JetStream Crossbars # Y00425 - SightLine Towers # Y64AR - SightClip Fit Kit # Y44UR - Lock Core Kit # Y07204 (optional) If you let me know what you plan on using the roof rack for I'd be more than happy to make an additional recommendation for you!
view full answer... - Recommended Roof Rack for a 2022 Ford Escape With Factory RailsThe roof rack that I recommend for your 2022 Ford Escape with Factory rails is the 2022 Ford Escape Roof Rack by Yakima which consists of: - Yakima JetStream Crossbars # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - SightClip Fit Kit for Yakima SightLine Roof Rack Towers # Y36AR This would provide you with a roof rack that fits your 2022 Ford Escape and would allow you to use both clamp-on and channel mounted accessories. It has a weight capacity of 165 lbs. and an aerodynamic...
view full answer... - Will Rhino-Rack Bars Transfer to 2023 Cadillac Escalade For Roof RackRoof rack parts from different manufacturers do not mix and match so the T-slot sizing from your Ford F-150's Rhino-Rack # RRVA180B-RRRLT600 crossbars won't work for your 2023 Cadillac Escalade. If you wanted to put a roof rack on your Escalade you could do so with a Yakima rack consisting of parts # Y00426, # Y64AR, and # Y44UV. Conversely, if you wanted to switch to Yakima HD bars for your 2016 Ford F-150 with a Retrax XR tonneau cover you can still do so but you'd need a new system...
view full answer... - Yakima Roundbar Roof Rack System Options For A 2024 Kia Seltos LXYakima currently only has confirmed fits for 2024 Kia Seltos models if they have raised or flush side rails so the naked roof towers # Y28TR you were looking at don't currently have a fit kit to make them work yet. If you have raised side rails then you would need TimberLine Towers for Yakima Crossbars # Y33TR in order to use the RoundBar SL Adapter # Y03536 and Yakima RoundBar Crossbars # Y00408. If you have flush mount side rails then you would need the SightLine Towers for Yakima Crossbars...
view full answer... - Kayak Carrier Recommendation for Hobie Mirage Compass Fishing KayakSince your Hobie Mirage Compass fishing kayak weighs 87 lbs you're either going to have to use a post-style carrier like the Yakima BigStack # Y04041 or use 2 sets of a J-Style carrier like the etrailer J-Style Kayak Carrier # e98878. I recommend going with 2 of the J-Styles simply because it will be easier to load an individual kayak on each one, especially with your heavier kayak. If you don't already have a roof rack then I recommend using a Yakima CoreBar roof rack. The correct parts...
view full answer... - Recommended Roof Rack for 2017 Ford Edge with Panoramic Sunroof and Flush Side RailsFor the best appearance, low-noise and long-term durability I recommend an aluminum aero-style roof rack. This type will be lighter than a steel bar rack, naturally non-corrosive and quieter in operation; and for this, I highly recommend going with Yakima for overall durability, noise reduction and ease of use. The Yakima rack that fits your 2017 Ford Edge with panoramic glass and flush side rails consists of parts # Y00428, # Y79AR, and # Y64AR.
view full answer... - Roof Rack and Kayak Carrier Recommendation For 2015 Mini Cooper 2 DoorI am happy to recommend a roof rack and kayak holder for the 2015 Mini Cooper 2 door. I recommend Yakima roof rack part # Y00425 for the bars, part # Y64AR for the feet and ft kit part # Y06009. This is a aerodynamic bar system that will cut down on wind noise and allow you to carry your kayaks. For the Kayaks I recommend, Yakima JayLow Kayak Carrier part # Y04073 because you can carry up to 2 kayaks with one carrier compared to most J-style carriers that only allow you to carry 1 kayak....
view full answer... - Roof Rack Recommendation for 2017 Ford Edge with Panoramic SunroofWe have a variety of roof rack options that fit your 2017 Ford Edge with the glass roof but I really like the Yakima JetStream system because it's fine-tuned to fit your vehicle like a glove and keep the crossbars level with each other. The correct parts will depend on if you have the flush rails or a naked roof. Flush Rails 50" JetStream Crossbars - # Y00425 SightLine Towers - # Y64AR SightClip Fit Kit - # Y79AR Naked Roof 60" JetStream Crossbars - # Y00426 BaseLine Towers - # Y28TR BaseClip...
view full answer...
- Best Roof Rack For 2024 Subaru Impreza HatchbackThe best roof rack for your 2024 Subaru Impreza hatchback with a naked roof is from Yakima due to how quiet it is as well as its durability. The roof rack that fits your Impreza is made up of the following parts: - Yakima JetStream Crossbars - Silver # Y00428 or Black # Y00425 - SightLine Towers for Yakima Crossbars # Y64AR - Landing Pad 22 for Yakima Towers # Y00248 The JetStream bars are quiet because have what are called "WindRidges" on top that control the flow of the air both over...
view full answer... - Yakima Roundbar Roof Rack For 2018 Subaru Outback TouringYakima does have a round bar roof rack that fits your 2018 Subaru Outback Touring; the correct bar size is the 48 inch bars part # Y00408. The towers you'd need are the SightLine # Y64AR, with round bar adapter # Y03536, and Fit Kit # Y32CR.
view full answer... - Recommended Yakima Roof Rack For A 2023 Acura MDX Yes, we do have a roof rack available that will fit your 2023 Acura MDX. This roof rack consists of the following parts: Crossbars - Yakima Jetstream 50' # Y00428 Towers - Yakima SightLine # Y64AR Fit Kit - # Y49AR It is also recommended (but not required) to get locks for the roof rack for added security. If you are interested you will want part # Y07204. This will be everything you need to be able to mount your Yakima Skybox 12 # Y07334 to your roof. Please keep in mind that for the...
view full answer... - Can Thule Fit Kit Bolts for 2021 Mazda CX-5 Flush Rails Be ReplacedThe Replacement Bolts for Thule Fit Kit for Podium Style Foot Pack # 7524498001 are not the same style of bolts needed to secure a Thule roof rack to your 2021 Mazda CX-5 flush rails. I took a look at the instructions for 183160 fit kit designed for your vehicle and it looks like the correct replacement bolt is part 50435 but since this fit kit has been discontinued (as of May 2023) this isn't a part that's readily available. I imagine Thule will eventually come back out with a fit kit...
view full answer... - Towers for Yakima RoundBar on 2024 Honda CR-V HybridThere are towers available that will allow you to install your Yakima RoundBars on your 2024 CR-V Hybrid. You will need the following: -SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 # Y64AR -RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 -SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers # Y44UR If you have Yakima Same Key System locks you can transfer them over or you can add new locks using...
view full answer... - Recommended Roof Rack for a 2023 Mazda CX-50 w/ Flush Rails That is helpful and we do have a Yakima roof rack that will attach to the flush rails on your 2023 Mazda CX-50. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 50" Long - Qty 2 item # Y00425 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y27AR This aero bar roof rack system has a 165 lbs capacity. I recommend...
view full answer... - Roof Rack System for Thule Hullavator Pro Load Assist Kayak CarrierBoth the Thule Hullavator # TH898 and the Yakima ShowDown # Y04081 are great kayak carriers but I prefer the Hullavator. Regardless of age, after a day of paddling the lift assist is awesome when it comes to helping you load your boat on top of your roof. You do need 4"-8" of overhang on your roof rack for this carrier to work. Your current roof rack on your 2010 Infiniti QX56 will not work. The only confirmed fit for your vehicle is a Thule Roof Rack system like Thule WingBar Evo Crossbars...
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2021 Ford EdgeYes we have the parts needed to install a round bar Yakima roof rack on your 2021 Ford Edge that does not have rails or a glass roof. You'd need the following # Y28TR, # Y03536, # Y06102, and # Y06139 since you already have the # Y00409.
view full answer... - Parts Needed to Install Yakima Round Bar on 2015 GMC Sierra 2500 Crew CabYakima has a roundbar roof rack that fits your 2015 GMC Sierra 2500 crew cab with the part numbers # Y00410, # Y28TR, # Y03536, and # Y06122. Since you have the bars already you'd need everything I mentioned except the # Y00410.
view full answer... - Can I Use My Old Yakima RoundBars On My 2017 Chevrolet ColoradoThere is a solution for you that will allow you to still use Yakima round bars, if you have them. Unfortunately, since the Q-Towers have been discontinued and the new system is not backwards compatible, you will need new towers, a fit kit, and round bar adapters. This is what you need for your 2017 Chevrolet Colorado. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part...
view full answer... - Compatibility of Yakima Roof Rack System with Dual Sun Roof on 2012 Hyundai SonataAccording to our friends at Yakima, they offer a roof rack system compatible with your vehicle that can be constructed using the following parts: Round 58 inch CrossBars, part # Y00409 BaseLine Towers, part # Y28TR Round Bar SL Adapter, part # Y03536 BaseClip Fit Kit, part # Y06144 BaseClip Fit Kit, part # Y06153 The towers will sit just above the doors, and will be located to the outside of the roof edge molding. Therefore, they will come into contact with the metal portion of the roof,...
view full answer... - Can Thule Tandem Bike Rack be Used on Roof of 2020 Subaru Outback Wagon with OEM CrossbarsThe Thule Tandem Bike Rack part # TH558P requires an aftermarket roof rack so for your 2020 Subaru Outback Wagon with the current factory rack you'd also need the Yakima # Y00408, # Y53TR, # Y03536, # Y46VR to use the carrier.
view full answer... - Lowest Cost Roof Rack Recommendation for 2020 Hyundai Santa Fe With Bare RoofThe lowest priced roof rack option we offer for the 2020 Hyundai Santa Fe with a bare roof would be a round bar rack from Yakima. The rack would consist of the following parts: • Yakima 48 Inch Round Crossbars, part # Y00408 • Yakima BaseLine Roof Rack Towers, part # Y28TR • Yakima SL Round Bar Adapters, part # Y03536 • Base Clip Fit Kit # Y06151 • Base Clip Fit Kit # Y06154 Unfortunately, the Malone # MPG215 rack you'd looked at isn't' a fit for your Santa Fe. I've linked you to an...
view full answer... - Will The Thule Complete Crossroad Kit Fit My 2008 Jeep Factory RailsThe Thule roof rack is a custom fit for your Liberty consisting of the Evo Raised Rail Feet # TH710401 and 53" WingBar Evo Crossbars # TH711420 and locks # TH450400. We also have the Yakima TimberLine Towers, parts # Y03536 and # Y33TR, which will work with the Round 58 inch CrossBars for Yakima Roof Rack Systems, item number Y00409, to put rails on your Jeep.
view full answer... - BaseClips for Yakima Baseline Towers and RoundBar Crossbars on a 2023 Ford MaverickThe correct clip kit for your 2023 Ford Maverick with naked roof to use the Yakima RoundBar Crossbars # Y00409 and the BaseLine Towers for Yakima Crossbars # Y28TR with the RoundBar SL Adapter # Y03536 is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180.
view full answer... - Recommendation on a Yakima Roof Rack and Cargo Carrier for a 2016 Mazda CX-5 Naked RoofYour 58 inch Yakima Round Bars, # Y00409, will fit your 2016 Mazda CX-5 as long as you use the correct towers and hardware to install on your Mazda's roof. The towers you will need are the Yakima BaseLine Towers # Y28TR as the Q Towers have been discontinued. You will also need the Round Bar SL Adapters # Y03536, BaseClip Fit Kits # Y06130 and # Y06132. The Yakima SkyBox 18 Cargo Box # Y07336 will work great with this roof rack but we'll need to check to see if the 57" front bar to rear...
view full answer... - Yakima Roof Rack that Fits 2018 Lexus GX 460Thule actually changed the design of their square crossbars a couple years ago so any of the current rack fits would not be compatible with the older style of bar you have. The current bar now has a slot that runs down the bottom of the bar. Thule actually does not have a rack that fits your 2018 Lexus GX 460 but Yakima has their round bar roof rack part numbers # Y00408, # Y00145, and # Y03536 that would work well.
view full answer... - Will the Surco Safari Roof Baskets Work with Rola Roof Rack CrossbarsI do have an option that will allow you to mount a Surco Safari Basket to the roof of your 2017 Ram ProMaster City but the crossbars of the Rola Haul-Your-Might Truck Bed Ladder Rack 59742 will not work with the mounting feet used on the ProMaster City Roof Rack by Rola 59633 because the crossbars on the ladder rack are too long for your vehicle. Since the crossbars are different lengths the mounting holes on the feet will not line up with the mounting holes on the crossbar. Also, the...
view full answer... - What Size Screw is Required for 2012 Mazda CX-9 Roof Rack?If you are looking for the screw size for the factory mount locations, you will use M6 screws that are 35 mm long which come in the Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Fixed Mounting Points # DK289. For a roof rack, I recommend this fit kit along with the Rhino-Rack Vortex Aero Crossbars # RRVA126B-2 and the 2500 Series Legs # RRRLKVA. Since you asked from a Yakima bar, the Yakima fit kit uses M6x28mm, M6x33mm and M6x40mm hardware as well as M8x35mm. These...
view full answer... - Wider Spread Roof Rack Recommendation for 2015 Toyota Venza with Naked RoofThe only wider crossbar roof rack we have available for your 2015 Toyota Venza is the Yakima part numbers # Y00409, # Y28TR, # Y03536, # Y06129, and # Y06131 that you mentioned which has 33 inches of crossbar spread. Most Thule roof accessories that are designed for square bars are also designed for round bars so this should still work great for you.
view full answer... - Parts Needed to Complete Yakima Roof Rack on a 2008 Toyota TacomaSince it looks like you have a Q-towerYakima crossbar setup you would only need the correct fit kit so that it could install on your 2008 Toyota but the clips for those towers are no longer available. Instead you will use the following: BaseLine Towers # Y28TR RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06125 and # Y06128 Hopefully the crossbar is at least 58 inches long. Otherwise you would need the part # Y00409 as well.
view full answer... - Parts Needed to Install Yakima Round Crossbars on a 2006 Honda CR-VThe Yakima RailRiders are a very old style of roof rack that hasn't been around in a long enough time that there are no landing pad or any fit info available. If you have a set of round Yakima crossbars like the part # Y00408 you can reuse them but you have to go with the current Yakima towers etc. For that you'd also need the part numbers # Y53TR, # Y03536, and # Y00228.
view full answer... - Roof Rack Recommendation for Rhino Rack Sunseeker II Awning on 2017 Ram ProMaster CitySince the Sunseeker II Awning Item # RR32105 only fits Rhino-Rack Heavy-Duty, Aero and Sportz crossbars; Thule and Inno square crossbars; Yakima round crossbars we have a solution, but it's not the Rola rack you mentioned. You'd want the Yakima Round Bar Rack part numbers # Y00408, # Y53TR, # Y03536, and # Y00233 which would fit and work well on your vehicle and with the Sunseeker. You will also need the adapter part # RR32105 too with the round bars.
view full answer... - Best and Quietest Snowboard Rack for a 2014 Acura MDXTo carry up to 4 snowboards on your 2014 Acura MDX I recommend using the Yakima FatCat EVO 6 Rooftop # Y03096. This carrier has a low-profile design that will reduce drag and wind noise. This system will attach to your factory roof crossbars, if equipped. But, if your 2014 Acura MDX does not have factory installed roof rails or a roof rack system then you will need a roof rack system. I recommend the Yakima roof rack consisting of parts # Y00409, # Y28TR, # Y03536, # Y06150, and # Y06105....
view full answer... - Will Installing Track Roof Rack System on A.R.E. Topper Void WarrantyInstalling a track system roof rack like the Yakima parts # Y01126, # Y00221, # Y8890027, and # Y00410 won't void the warranty for your pickup but from what I could find it looks like modifying your A.R.E. topper will void that warranty. Since we aren't an A.R.E. dealer I can't really confirm this, but from my research it is very likely that your warranty will be void. So you can have the track system professionally installed but that would be your choice whether you want to pursue this...
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2017 Nissan Rogue with Raised Roof RailsFor the raised side rails of your 2017 Nissan Rogue you would need the Yakima Timberline Towers part # Y33TR to attach your Yakima round bars. Then for the adapter for these fit to allow the install of your round bars you'd need the part # Y03536. The recommended bar size then is the # Y00409.
view full answer... - Roof Rack Recommendation for a 2011 Ford Flex and Importance of Following Fit MeasurementsYakima is pretty particular about where you install their roof racks on the roofs of vehicles. I cannot safely recommend you install the bars in a different location than what they recommend. This would void the warranty of the rack and would cause it to have an unknown capacity. Part of why they recommend certain areas of the roof for their racks is based on the structural strength of the roof. Typically with roof racks installed the wind noise created is loud enough that most people...
view full answer... - Roof Rack Recommendation for a 2009 Ford Flex with Vista RoofYou will need a roof rack on your 2009 Ford Flex to be able to use a roof mounted cargo box. For a Yakima roof rack you will need: Yakima TimberLine Towers, # Y33TR, RoundBar SL Adapter # Y03536, crossbars # Y00409, and 2 sets of Landing Pad 11, # Y00233. For a roof rack you could then use the Yakima SkyBox NX 16 Rooftop Cargo Box # Y95AV which has 16 cubic feet of storage space or for a larger one the Yakima SkyBox 21 Rooftop Cargo Box # Y07337.
view full answer... - Will Yakima FrontLoader Fit on Factory Crossbars of 2017 Toyota TacomaAs long as the crossbar spread on your 2017 Toyota Tacoma is between 16 inches and 48 inches the Yakima FrontLoader part # Y02103 will fit and work well. If you have raised rails on the roof of your truck and need crossbars that run left to right you'd also need the roof rack # Y00409, # Y03536, and # Y33TR and you'd be set.
view full answer... - How To Reuse Yakima Q-Towers on a 2018 Volkswagen Golf GTII do have an option for you but I don't have any way for you to use your old Q-Towers on your new 2018 Volkswagen Golf GTI because the clips are just not available. The best option you have to reuse some of the components you have now is to purchase new clips part # Y06123 for the front and part # Y06125 for the rear, new feet part # Y28TR, and the adapter part # Y03536. I am not sure what you are asking in regards to Thule but most of their accessories will work with the Yakima round...
view full answer... - Which Yakima Cross Bars and Front Fairing Will Fit 2007 Jeep Grand CherokeeThe Yakima cross bars that will fit 2007 Jeep Grand Cherokee are the Yakima Round 58 Inch CrossBars for Yakima Roof Rack System, part # Y00409 which comes with 2 cross bars. Part # Y00409 will mount to Yakima TimberLine Towers, part # Y33TR, and the RoundBar SL Adapter # Y03536 which you referenced in your question.
view full answer... - Recommended Roof Rack for a 2022 GMC Yukon XLYes, we do. The best roof rack for your 2022 GMC Yukon XL is going to be the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This roof rack will attach directly to your Yukon's flush side rails. It has a 165 lbs capacity. I have linked an...
view full answer... - Will Rhino-Rack Bars Transfer to 2023 Cadillac Escalade For Roof RackRoof rack parts from different manufacturers do not mix and match so the T-slot sizing from your Ford F-150's Rhino-Rack # RRVA180B-RRRLT600 crossbars won't work for your 2023 Cadillac Escalade. If you wanted to put a roof rack on your Escalade you could do so with a Yakima rack consisting of parts # Y00426, # Y64AR, and # Y44UV. Conversely, if you wanted to switch to Yakima HD bars for your 2016 Ford F-150 with a Retrax XR tonneau cover you can still do so but you'd need a new system...
view full answer... - Yakima Round Bar Roof Rack for 2023 Chevy TahoeI checked with Yakima and their 58 inch round bar roof rack part numbers # Y00409, # Y00145, # Y03536, # Y44UV is a fit for your 2023 Chevy Tahoe with he factory rack so this would give you what you are looking for.
view full answer... - Yakima HD Roof Rack and LockNLoad Fitment on a 2021 GMC Yukon AT4The parts you need to build a Yakima HD roof rack kit for the flush rails on your 2021 GMC Yukon AT4 includes the following parts: 60" HD Crossbars - # Y01157 HD Bar SL Adapter - # Y03541 SightLine Towers - # Y64AR SightClip Fit Kit - # Y44UV Lock Core Kit - # Y07204 (optional) This will work great with the Yakima LockNLoad Platform Rack for Crossbars # Y45UV, but we still need to talk about the weight ratings as you do bring up a great point. The Yakima HD bars are actually rated for...
view full answer... - Recommended Roof Rack for a 2023 GMC Yukon XLTo add a roof rack to your 2023 GMC Yukon XL, you will want the roof rack by Yakima which includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 Black or item # Y00429 in Silver SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV I have attached a couple of pictures below that will show you what this roof rack looks like and how to...
view full answer...
- Parts Needed to Add a Yakima Jetstream Roof Rack to a 2024 Cadillac Escalade w/ Roof Rails I would be happy to! To install a Yakima roof rack to the rails on your 2024 Cadillac Escalade you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 SightLine Towers for Yakima Crossbars - Flush Side Rails - Qty 4 item # Y64AR SightClip Fit Kit for Yakima SightLine and RidgeLine Roof Rack Towers item # Y44UV This aero bar roof rack system has a 165 lbs capacity. I recommend adding the Yakima Same Key System item # Y07204 to...
view full answer... - Platform Roof Rack Available For a 2022 GMC Yukon XL DenaliRyan, currently I do not see that Rhino-Rack has any options for your 2022 GMC Yukon XL Denali. We do have the Yakima HD Crossbars # Y01157, Towers # Y64AR and Fit Kit # Y44UV which would allow you to use the LockNLoad Platform Rack # Y45UV.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.