RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
(127 reviews)
Price: $31.05
In Stock
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
Retail:$38.02
Our Price: $31.05
You Save: 18%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
13% prefer this
- All Info
- Reviews (127)
- Q & A (0)
- Videos (21)
- Photos
Yakima Accessories and Parts
- Roof Rack
- Adapters
- Crossbars
- Yakima
These adapters allow you to use Yakima RoundBars with BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters and 4 endcaps.
Features:
- Adapters let you mount your Yakima RoundBars on BaseLine, SkyLine, TimberLine, or RidgeLine towers
- Easy installation - adapters slide onto bars and attach with bolts (included with towers)
- 4 Adapters and 4 RoundBar endcaps included
8003536 RoundBar StreamLine Adapter for Yakima Base Line, Sky Line, Timber Line, and Ridge Line Towers - Qty 4
Item # Y03536
Video of RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima Roof Rack Installation - 2013 Honda Accord
Speaker 1: Today on our 2013 Honda Accord, we're gonna be test fitting the Yakima RoundBar roof rack system, consisting of part numbers Y00409. These are the round 50-inch crossbars for the Yakima roof rack systems. Part number Y00146, theses are the baseline towers for the Yakima crossbars. Part number Y03536, this is the RoundBar SL adapter for the Yakima baseline, Skyline, Timberline and Ridgeline towers. Part number Y06148 and Y006150, and these are the base clip fit kits that you're gonna need for your vehicle.The Yakima RoundBar roof rack system is great for carrying a wide variety of accessories on your rook or freeing up space inside your vehicle. These bars are tough and durable, and together have a combined carrying capacity of 220 pounds, but you always wanna check with your vehicle's manual to make sure you roof can withstand those weights.They're very easy to install.
They simple clamp around your vehicles doorframe. They come with these end caps here that just snap into place and also have a knock out for Yakima same-key lock system, which when installed, can secure not only your roof rack to your vehicle, but you can also make it key to like with whatever accessories you're installing on top of it.Now that we've gone over some of the features of the roof rack system, let's go ahead and show you how it installs. We already have our rear bar partially assembled on our table and we'll go through the rest of the steps. We'll start by installing our RoundBar adapter, starting with this plastic piece here that fits to the top portion of our tower. Just snaps into place.
We'll take our round bar adapter, which has this screw end on the bottom of it, line it up with that portion there, and we'll come to the end of this, pulling out this gray tab, flipping it upside down, going to the screw, which by loosening up that gray tab we can see now. Let's loosely install it at the moment. Then, we'll slide it on to the other end of our bar.We'll also install the pad portion of our fit kit. It just pushes in at the bottom of our tower until you hear a little bit of a click. Also, you wanna check your fit guide to make sure that this is in the proper notch.
If not, you loosen up the screw there and push it into its proper place. You can see that it moves our pad here. Once it's in its proper place, turn it to the side like that.Now, we're gonna measure it from tower to tower on the inside. Again, this measurement's gonna be in your instructions. Once you got that measurement down, we'll come back to that screw in the bottom here with our adapter piece and tighten it down the rest of the way.
You're gonna hear audible clicks once it's tightened down from our tool here. Like that. There you know it's tightened down enough and you're not gonna over-tighten it.Next, we'll put on our end caps here to hold everything in place. Do this on both sides.Now, we're ready to install it on the rear portion of our vehicle. We'll open up both doors to get ready to receive the rear cross bar. Set the bar in place. I want you to notice that I haven't put the clips in yet. I'm gonna do that in a second. I kind of saved that for the last thing that I do because I don't want the clips to possibly make contact with the roof of the vehicle and possibly scratch it. Make sure they're set evenly on both sides. Next, I'm gonna get the crossbar spread measurement. That's gonna be from center of the bar to center of the front bar. You'll find this measurement in your instructions as well.Next, I'll open up the little door here and our plate will slide to the inside like so. Then, we'll turn this screw. That's gonna lower our clamp onto our vehicle, as you can see there. We'll repeat this for the other side. Next, we'll tighten it down with the center screw here. Again, until you hear those two or three audible clicks. There we go. Then we can close that up. Then we'll put our end caps on. These two portions here fit into these hook portions there. Then they just snap into place. Now, we're ready to load up our gear and hit the road.There you have it for the Yakima RoundBar roof rack system on our 2013 Honda Accord.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 - Y03536
Average Customer Rating: 4.7 out of 5 stars (127 Customer Reviews)
These adapters allow you to use Yakima RoundBars with BaseLine, SkyLine, TimberLine, or RidgeLine roof rack towers. Kit includes 4 adapters and 4 endcaps.by: Jerry F04/23/2023
I have been using Yakima racks for around 40 years and have never had any problems. However, I am amazed at the price increases over the years. Etrailer prices were by far lower than most. Overall, a very excellent purchase.
by: SueCanoe02/10/2023
I'm happy that this allows me to save money by using my old round bars on my new vehicle, with only the purchase of new "towers" and these adapters.
Sue G.
2/11/2024
Its working great!
by: Charles02/09/2024
Kimberly has shown that great customer service is not dead! etrailer and Kimberly are great to work with and have earned my business and will always be the 1st and last place I look for my rack+ needs!
As for the application, I needed more space to fit my cargo box on top of my 4Runner TRD Pro’s rack. I came up this this… Thank you!
by: TimN03/19/2024
Works perfectly. I am always impressed that Yakima continues to make parts for the "old roundbars" since they have since moved on to the superior JetStream bars.
by: Jay07/31/2023
Kit worked perfectly on my 2021 Subaru Forester. The whole install took 30 minutes. Never been disappointed with etrailer.
by: Debra09/10/2023
The rack has been so useful since I purchased it. Staff at etrailer.com were exceptionally helpful in getting the best option for my car and answering questions. I recommend this company, for its 110% customer service, excellent prices and timely delivery.
by: Tim 10/18/2023
One quick phone call and Gwendolyn figured out exactly what I needed for our new car to use my old Yakima rack.
by: Mark 01/11/2024
Great products though, again, written instructions would have been nice.
by: 04/01/2024
necessary for using the widest cross bar option (78"). East to install
by: Mark07/19/2020
The Yakima roof rack system is an Outstanding product. I purchased the product to replace the OEM roof rack because it was too flimsy to carry the tandem bike mount and my bike. The Yakima roof rack is solid and provides me the peace of mind while hauling my bike on the roof of my car. etrailer provided the product for the best price as always.
Mark
7/24/2021
Still an outstanding product.
by: Paul07/09/2019
Installation of the hitch, wiring,rear bike rack, and new roof rack towers went well. I didn't set any speed records, but I was more concerned with doing no damage on a new 2019 Toyota Sienna AWD van. The hitch fit up well per instructions except that I was able to work around the exhaust without lowering it. Underbody panel and rear fascia did both need to be removed. Very happy with the end result. The new van is now set up to haul the bikes and canoes and move my log splitter.
by: Roland01/08/2024
Haven’t used them yet but they should work as expected
by: Peter07/29/2023
first try was missing what was needed
Etrailer helped. It was great!
by: Allen10/11/2021
Installation was relatively easy, instructions were clear. "Snapping" the bases into the towers required more force than I expected, but that speaks to the adapter's durability. I just wish Yakima would manufacture their stuff anywhere other than mainland China.
by: Kenneth 03/02/2023
E trailer has me me spoiled yet again! If only I could expect this level of service from other suppliers.
by: Gary 04/01/2023
Works great to use my round bars on the Skyline towers.
by: Nick09/21/2017
Product works as advertised thus far. When you buy the yakima towers, you are required to purchase these as well to fit the rounder bars (I feel sure there are other adapters for other bar shapes). These should have come with the towers in my opinion, and I resented having to shell out more $$ to purchase these "must have" adapters to mount my bars. 3 star overall rating based on function, price. Delivery and packaging was top-notch through etrailer.
by: Patricia Douglas02/14/2022
Went Over and beyond on helping me solve a difficult problem on
how to fine and put a roof rack on a very difficult car...
Best Customer Service of any company I have ever worked with.
Great service before and after the sale to make sure everything
went smoothly. Can’t thank them enough. Very happy customer.
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.
by: Deborah07/27/2023
Great service - great price
by: D White06/20/2018
Ordered new towers and clips so as to use my old-school round bars (I bought these at least 18 years ago, maybe even earlier) and bike and canoe accessories on a new vehicle (naked roof 2018 CR-V). Installation was tedious, as usual, but not difficult and the written instructions were straightforward. Youtube helpful too but not necessary. Have hauled bikes and the canoe in high wind on the interstate (no more than 65 mph though) on the CR-V and so far so good. Have had excellent results with Yakima racks on 3 vehicles now (2 sedans and now the CR-V) over last 28 yrs. This is my first purchase through etrailer. Very pleased. Good price, excellent service online and via phone, rapid delivery. Highly recommend.
by: David01/10/2018
As always an exceptionally well designed, quality product. Yakima has never disappointed me for more than 25 years now. I still use some of my original rack package. etrailer, per usual, had a great price and wonderful instructional videos. Shipping was fast and everything was perfect. It’s amazing that Yakima can make racks fit so many cars like it was a custom job. This was just a piece of an entire roof rack base with cross bars. Excellent stuff
by: John P.08/29/2018
Bought as a pkg for my 2017 Golf R with Round Bars since I had a bunch of Yakima bike racks and a canoe gunwale rack for my old Yakima set up. Installation was easy with good instructions. All measurements from the Yakima site appear to be spot on.
etrailer.com shipped these out quickly and all parts arrived without damage.
by: Chris02/11/2018
I've got a bunch of 20yo "vintage" Yakima gear that is all setup for the round bars. I'm very happy that this adapter is available to use with modern flush factory rails and Ridgeline towers.
by: Dorothy05/30/2016
The Yakima product I purchased for my 2009 Subaru Forester installed in one hour. The rack is the equivelent to having an manufacture installed rack for less the cost. I am abslutely pleased!
25
127
Show More Reviews
See what our Experts say about this Yakima Accessories and Parts
- Height of a Yakima Baseline Tower with a Round BarI went out to our warehouse and put a kit together real fast, and when I measured it off the ground, the round bar sits about 3-1/4 inches off the ground when installed into the required SL Adapter, part # Y03536. To note, the bottom of the baseline tower was about 2 inches off the ground. The fit kit can add roughly 1/4 inch to the tower. Your fit kit will change for the Baseline tower, and if you reply and let me know what vehicle you have, I can recommend a more complete kit for your...
view full answer... - Correct Parts for Yakima Roof Rack on a 2008 Toyota FJ CruiserThe recommended round crossbar rack for your factory rails would include the TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails # Y33TR and the RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers # Y03536.
view full answer... - What Round Bar Adapter Will Go With Yakima TrackTowers?The Yakima RoundBar SL adapter # Y03536 will be compatible with the Yakima TrackTowers # Y52AV. Per my contact at Yakima, you will use just the ring and the M6 bolt.
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2012 Toyota PriusPretty recently Yakima totally redesigned their round bar roof racks with new feet which means that all new fit kits had to be created and they phased out the old fit kits like you'd need since you have a Q-tower setup. So the best solution we have to allow you to install a roof rack with your current round bars # Y00409 will be with the part numbers # Y00146, # Y03536, and # Y06117.
view full answer... - What Is The Inner Diameter Of Yakima Round Bars Y00411?The Round Cross Bars for Yakima Roof Rack System # Y00411 that you were looking at have an inner diameter of .937" with a wall thickness of about .188" according to Yakima. All Yakima round bars have an outside diameter of 1-1/8". These are made to attach onto the roof via roundbar adapters like # Y03536. Also, these round bars don't come with endcaps but you can get them here # Y80159. Feel free to give some information on the vehicle or application that you are wanting to install these...
view full answer... - Roof Rack Recommendation for a 2010 Subaru Outback Wagon with Raised Side RailsFor your 2010 Subaru Outback with raised side rails you would need the Yakima roof rack components part numbers # Y00408, # Y03536 and # Y00147 to give you a set of crossbars so that you can install your Yakima cargo box.
view full answer... - Roof Rack Recommendation for a 2012 Jeep LibertyYes, the Yakima roof rack you referenced that consists of the following components # Y00409, # Y03536 and # Y00147 has been confirmed to fit your 2012 Jeep Liberty and would do a great job to let you carry your Yakima Rocketbox cargo box.
view full answer... - Converting Yakima Timberline Towers To Work With Yakima Jetstream CrossbarsAll you need is this T-Bolt Adapter # Y03541. It will take the place of your RoundBar Adapter # Y03536 and will work with the Jetstream Crossbars # Y00426
view full answer... - Parts Needed to Install Round Bar Yakima Roof Rack 2019 Ford F-150 Super CrewYakima changed the feet and fit kits of their round bar roof racks so while we can help you reuse your bars you would have to replace everything else. So you already have the part # Y00409 for the bars so everything else you need would be: BaseLine Towers # Y00146 RoundBar SL Adapter # Y03536 BaseClip Fit Kit # Y06122 This is the same current roof rack design that Yakima recommends for a 2012 Ford F-150 so it is very possible what you have now would work on your new truck as well.
view full answer... - Round Bar Roof Rack Recommendation for 2005 Subaru Outback Wagon with Factory CrossbarsSince your 2005 Subaru Outback wagon with factory crossbars has raised side rails what you'd need to install a set of round Yakima crossbars is the Yakima Round Bar Roof Rack # Y00408, # Y03536, and # Y00147 and you'd be set.
view full answer... - Yakima Round Bar Roof Rack Components to Fit 2017 Chevy Silverado 4 dr Crew CabI was able to check with Yakima and while the Q tower racks are no longer made they did tell me that the Q7 clips are the correct ones for your 2017 Chevy Silverado for the front and rear bars. BaseClip 122 is the correct clips for the current Baseline towers but they are not compatible with the Q towers at all. So how can we help? We can offer you the current Yakima setup that will allow you to reuse your round bars but you'll need new feet and clips. The parts needed to install a Yakima...
view full answer... - Yakima Roof Rack Recommendation for a 2013 Subaru Outback Wagon with Factory CrossbarsThe only safe recommendation I can make for you would be to install the Yakima Roof Rack that consists of part number # Y00408, # Y03536 and # Y00147 on your 2013 Subaru Outback Wagon as there is no safe way I can recommend you modify the cargo box you have to fit the larger crossbars of your vehicle.
view full answer... - Parts Needed to Install Roundbar Yakima Roof Rack on 2021 Ford F-250I have a way you can reuse your Yakima round crossbars on your 2021 Ford F-250 supercab but Yakima discontinued the q towers a while ago so there aren't any q clips around or ones made to fit your truck. What you'd need is the and BaseLine Towers # Y00146, fit kit part # Y06185 with the round bar adapter # Y03536 and you'd be set.
view full answer... - Can Karrite Voyager Cargo Box Fit on Yakima Round Bar Roof RackYes, the Karrite Voyager cargo boxes can fit on Yakima Round Bar roof racks like the round bar roof rack that fits your 2006 Honda Ridgeline part numbers # Y00409, # Y03536, and # Y00147. The Voyager is compatible with round, square, aero, elliptical, and most factory crossbars.
view full answer... - Yakima Round Bar Roof Rack Recommendation for 2007 Jeep LibertyTo install a set of round Yakima roof rack crossbars on your 2007 Jeep Liberty will require the following components. Round bars # Y00408 SL Round Bar adapter # Y03536 TimberLine Towers # Y00147
view full answer... - Yakima Roof Rack that Fits 2018 Lexus GX 460Thule actually changed the design of their square crossbars a couple years ago so any of the current rack fits would not be compatible with the older style of bar you have. The current bar now has a slot that runs down the bottom of the bar. Thule actually does not have a rack that fits your 2018 Lexus GX 460 but Yakima has their round bar roof rack part numbers # Y00408, # Y00145, and # Y03536 that would work well.
view full answer... - Parts Needed to Use Yakima Round Bars on 2013 Toyota Prius cSometimes we are able to find older Yakima fit info but I checked and they do not have a Q clip setup for the 2013 Toyota Prius c so the only option we have would be a new rack that would allow you to use your round bars. The complete rack for your vehicle consists of: BaseLine Towers for Yakima Crossbars # Y00146 BaseClip Fit Kit # Y06135 BaseClip Fit Kit # Y06179 Round Bar Adapter # Y03536
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2021 Ram 1500For your 2021 Ram 1500 the best solution we are going to have that will let you reuse your current Yakima Round Bars would be with the current Yakima foot and mounting pad setup # Y00146, # Y03536, and # Y06135. Normally with this setup you'd also need the round bar # Y00410 which you already have.
view full answer... - Recommended Yakima Towers for For Round Bars on 2021 Honda Ridgeline With Factory Side RailsYakima recommends using round bars that are at least 58 inches in length for the 2021 Honda Ridgeline, so if the round bars you already have are at least that length, there's no reason why you can't reuse them. The Yakima # Y33TR TimberLine towers are exactly what I'd recommend you use. When the TimberLine towers are combined with the RoundBar SL adapter, part # Y03536, the round bars will work perfectly with the TimberLine towers. Because the round bars cause quite a bit of wind turbulence...
view full answer... - Can I Use My Old Yakima RoundBars On My 2017 Chevrolet ColoradoThere is a solution for you that will allow you to still use Yakima round bars, if you have them. Unfortunately, since the Q-Towers have been discontinued and the new system is not backwards compatible, you will need new towers, a fit kit, and round bar adapters. This is what you need for your 2017 Chevrolet Colorado. BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4, part # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4, part...
view full answer... - Parts Needed to Install Yakima Roof Rack on 2017 Jeep Cherokee with Raised RailsTo install a Yakima round bar roof rack on your 2017 Jeep Cherokee requires the following components: Round 48" CrossBars # Y00408 RoundBar SL Adapter # Y03536 TimberLine Towers for Yakima Crossbars # Y33TR Sounds like you already have the crossbars so you should only need the part # Y33TR and # Y03536.
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2020 Subaru CrosstrekSince you already have a set of Yakima round bars like part # Y00408 all you need to install them on the raised rails of your 2020 Subaru Crosstrek is # Y03536 and # Y33TR and you'd be set!
view full answer... - How do I Install a Set of Yakima Cross Bars onto a 2017 Toyota Tacoma Access Cab?In order to mount a set of Yakima Round Bars onto a 2017 Toyota Tacoma, you'll need the following clips and tower pieces: BaseLine Towers for Yakima Crossbars - Naked Roofs, part # Y28TR RoundBar SL Adapter for Yakima BaseLine Towers - part # Y03536 2x Base Clip Fit Kit for Yakima BaseLine Roof Rack Towers Qty 2- Part # Y06145 Note that you will need TWO (2) of the Clip Fit Kit, part # Y06145 in order to complete this installation. I've included a video of this installation so you can...
view full answer... - Roof Rack Recommendation for Yakima RocketBox on a 2016 GMC AcadiaIf the legs on your current Yakima roof rack system don't fit the raised rails on your 2016 GMC Acadia then as long as the round bar crossbars are at least the 48" length you can use the RoundBar SL Adapters # Y03536 and TimberLine Towers # Y00147 to carry your RocketBox. If you're looking for a completely new roof rack system then I recommend using the Yakima JetStream roof rack instead as this is the newest setup from Yakima and it works out really nice. For this setup you need the following: 50"...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Test Fit:
Zack K
Test Fit:
Hayden R
Test Fit:
Savanna B
Test Fit:
David F
Video by:
Andrew K
Video by:
Zach D
Video by:
Jonathan Y
Video by:
John S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Daron K
Updated by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gerald B.
4/24/2024
Still love the product but it is very noisy when driving.