Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating

Question

Question:

Rhino Rack HD Crossbar - Square Roof Rack - 2020 Toyota Corolla I noticed the weight limit is 165 lbs. Is that 165 lbs dynamic load? I used to have a jeep and had rhino rack and was impressed with them. I had put a Roof Top Tent on top of the jeep. I was curious about doing the same thing with these racks and the Corolla. Do you know what the static weight limit is on these? Thank You.

asked by: Joshua B

0

Expert Reply:

I checked with Rhino-Rack and they specifically mention they only have dynamic (moving) load ratings, and that is exactly what the 165 lb capacity is with the rack that fits your 2020 Toyota Corolla sedan. Rooftop tents generally only call for a rack to have a certain dynamic capacity so I recommend checking out your tent's manual to find out.

As for the roof rack for your 2020 Toyota Corolla, here are the parts you need:

- Rhino-Rack Heavy-Duty Roof Rack Crossbars # # RB1250B-2 (Black) or # RB1250 (Silver)
- Rhino-Rack 2500 Series Legs for Heavy-Duty Crossbars # RRRLKHD
- Custom DK Fit Kit # DK383

I also recommend Rhino-Rack Fairing for Roof Racks # RRRF3 with Heavy-Duty Crossbar Adapter Kit # HD-FK1 to help minimize any wind noise. I've added links to video reviews of the rack and fairing for you to check out as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Answer 2

Sometimes we are able to find older Yakima fit info but I checked and they do not have a Q clip setup for the 2013 Toyota Prius c so the only option we have would be a new rack that would allow you to use your round bars. The complete rack for your…

view full answer...

Answer 3

So the answer to this really depends on the diameter of the bars on your lumber rack. If they are less than 2 inches then you can use the Rhino-Rack Fishing Rod Carrier - Locking - 8 Fishing Rods #RR574F on your lumber rack. To do so you would need…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 11

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Does Rhino-Rack HD Roof Rack for 2020 Toyota Corolla Sedan Have Static Load Rating

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching