Recommended Flat Towing Set Up for a 2019 Jeep Wrangler Unlimited

Question

Question:

I need everything for my 2019 jeep wrangler unlimited so I can tow it behind my RV jeep weight is about 4600

asked by: David W

1

Helpful Expert Reply:

I would be happy to help you set your 2019 Jeep Wrangler Unlimited up to be flat towed. You are going to need a tow bar, base plate kit, wiring harness, supplemental braking system, Brake-Lite Relay Kit, and a charge line kit. I have listed these parts below and also linked review or installation videos.

Tow Bar- Blue Ox Alpha 2 Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 6,500 lbs item # BX7380

Base Plate Kit- Blue Ox Base Plate Kit - Removable Arms item # BX1139

Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267

Braking System - Demco SBS Stay-IN-Play DUO Supplemental Braking System item # SM99251

Brake Light Relay - Roadmaster Brake-Lite Relay Kit for Towed Vehicles item # RM-88400

Charge Line - Roadmaster Battery Charge Line Kit for Towed Vehicles item # RM-156-25

To secure your base plate and tow bar I recommended adding the Blue Ox Base-Plate and Receiver Lock Kit - Qty 4
Item # BX88177 to your set up.

expert reply by: Jerred H

1

Answer 1

The Curt Trailer Hitch Receiver item #C74DR fits both the Rubicon and standard or excluding Rubicon 2023 Jeep Gladiators. Our fitguide can be confusing when it comes to model break downs and this is another example of that. The Curt Trailer Hitch…

view full answer...

Answer 2

The best overall option for adding a Curt trailer hitch receiver to your 2023 Jeep Gladiator is the one that gives you the most overall function and capacity, which is the hitch that bolts onto your frame: - Curt Trailer Hitch Receiver #C74DR There…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Out of the two Curt Trailer hitches, I recommend The Curt Trailer Hitch #C74DR. I like this hitch over the other Curt hitch because it has a more traditional installation and will attach to the frame of your 2023 Jeep Gladiator Rubicon when the Curt…

view full answer...

Answer 5

We definitely have options available for a 205/75R15 tire and wheel combo, but we do not have any that are chrome plated at the moment. However, we do have a couple options that are pretty nice looking as well. The Kenda Karrier ST205/75R15 Radial…

view full answer...

Answer 6

Unfortunately, you wouldn't be able to use a dual hitch adapter like #D-192 for that, as having one accessory installed would prevent you from installing one in the other receiver. They just wouldn't fit. We do have the perfect solution for…

view full answer...

Answer 7

The best solution to raise your Curt hitch-mounted cargo carrier further above the ground is with an adapter like the Curt #D-192. This provides you with a top 2 inch receiver that sits 3-1/4 inches above the hitch on your vehicle. As you referenced…

view full answer...

Answer 8

The part #D-192 is designed for what you are looking to do. It will allow you to carry a bike rack and flat tow a vehicle. There are some capacities you need to keep in mind though. The #D-192 has a 3,500 lb towing capacity so you need to make sure…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...