What Class Hitch is the EcoHitch 306-X7326 for a 2017 Kia Soul?

Question

Question:

Hi, is this a class 2 or 3?

asked by: Leslie C

0

Expert Reply:

The EcoHitch item # 306-X7326 is a closer to a class II hitch than a class III. For some reason EcoHitch doesn't use the class standard. It has the function of a class III but the capacity of a class II. This hitch is confirmed to fit your 2017 Kia Soul. It has a 2" hitch receiver opening which is a very common hitch size so you will have no issue finding hitch-mounted accessories. The maximum towing capacity is 2,000 lbs and tongue weight capacity is 300lbs so make sure you are not exceeding that weight. You will want to verify with your owner's manual what your Soul's actual capacity is.

To tow with this hitch you will need a wiring harness item # 118637 and a ball mount kit item # C45534.

expert reply by: Jerred H

0

Answer 1

It looks as if your hitch crossbar has been drilled into and riveted into place which is a BIG TIME no-no. The people that installed it should have known better as drilling into a hitch can weaken it's structural integrity. To remove the trailer…

view full answer...

Answer 2

Because using an adapter increases the distance between the load of the bikes and rack and the hitch receiver, more leverage is exerted on the hitch as well as its attachment points to the vehicle. This is why the tongue weight capacity of the hitch…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...