Recommended Front Camper Tie-Downs For A 2015 GMC Sierra 2500

Question

Question:

looking for a front tiedown, for a GMC sierra 2500HD, model 2015. wasnt able to find it on the websire and nothing that looks like what i already have on the truck

asked by: Nadav G

0

Expert Reply:

If your 2015 GMC Sierra 2500 has no steps or running boards and a factory hitch then I have the following options based on bed length and cab:

6-1/2' Bed - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2220

8' Bed (Crew Cab) - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2219

8' Bed (Double Cab) - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2222

8' Bed ( Regular Cab) - TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2215

If you do have a step or running board in the way then let me know and I can find the correct fit for your application.

expert reply by: Kevin C

0

Answer 1

You sure can purchase the tie-downs separately. I have attached a link to our website product page for the tie-downs we have available for your 2014 Chevrolet Silverado 3500. Near the top of the page is a drop-down box you can make a selection…

view full answer...

Answer 2

I can see how this is confusing, since our site often uses part numbers that differ from the manufacturer's part numbers, but the TorkLift #TL44FR is TorkLift part number- C2226 so that would be the correct front tiedown for your 2020 Chevy…

view full answer...

Answer 3

As long as the bed in your 2011 GMC Sierra 2500HD is not a double-wall and it is not a step side or dually then you can use the Brophy camper tie downs, #HSSF or the angled down ones part #HSAB that you referenced. I also recommend the hardware…

view full answer...

Answer 4

The TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum - Front Item #TLC2214A is only going to be for the front of your 2017 GMC Sierra 3500. For the rear you would want tot use the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs…

view full answer...

Answer 5

I recommend using the TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2019 Chevrolet Silverado 3500 Crew Cab Dually Long Bed. I checked with TorkLift and the correct kit for the front is part #TLC2219 and the correct kit for the rear is part…

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 12

The current Torklift tie down part #TLD3101 that you have installed on your 1997 Dodge Ram 3500 only fits if you have the factory hitch. If you go with the SuperHitch part #TLD1100 you would need to change your rear tie down to the part #TLR3503.

view full answer...

Recommended Front Camper Tie-Downs For A 2015 GMC Sierra 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching