Recommended Trailer Hitch For A 2022 Kia Sorento X-Line Prestige

Question

Question:

2022 Kia sorrento x-line prestige. I needs trailer hitch and wiring harness

asked by: Joe

0

Expert Reply:

The etrailer Trailer Hitch Receiver # e28AR is confirmed to fit your 2022 Kia Sorento X-Line Prestige.

The hitch has a bolt-on installation with no welding required. It has a matte black powder coat finish which is over a protective base coat that offers superior rust resistance. I recommend the etrailer hitch over the other hitches because it has an extra coating of rust resistant paint on it which will allow it to withstand the elements for a longer period of time then the other hitches.

The trailer hitch has a maximum gross trailer weight up to 4,000 pounds and has a maximum tongue weight up to 600 pounds. I would recommend checking your vehicle's manual to find out the proper towing weight for your vehicle. I recommend this hitch over the other hitches because it has an extra coat of rust resistant paint which will give it better rust protection.

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK26FR will give you a 4-flat connector which will make it to where your trailer's stop, turn and taillights will mirror your vehicle's stop, turn and taillights. This custom-fit T-One connector will plug into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side taillights. You will have to remove the tail light assemblies to access the harness.

The Curt Towing Starter Kit # C45554 includes an 8-1/4 inch long, powder coated ball mount with a pre-torqued hitch ball; hitch pin and clip; hitch receiver lock with keys; hitch cover; and a storage case.

I attached an installation video link below.

expert reply by: Noah E

0

Answer 1

In order to tell if you have a factory tow package on your 2022 Kia Sorento, there will be tail light wiring connectors behind the rear driver's side tire. This will be on the exterior of the frame rail. In order to see these ports, you will have…

view full answer...

Answer 2

If your 2020 Kia Sorento has the factory tow package, there will be a tail light wiring connector behind the rear tire of the driver side, on the outside of the frame rail. As shown in the attached photos, an underbody cover will need to be removed…

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver #e28AR is confirmed to fit your 2022 Kia Sorento SX Prestige AWD. The trailer hitch has a bolt-on installation - with no welding required. It has a matte black powder coat finish which is over a protective base…

view full answer...

Answer 4

I recommend the etrailer Trailer Hitch Receiver #e28AR for your 2022 Kia Sorento X-Line AWD. This receiver is confirmed to fit all trim levels of your 2022 Kia Sorento. The spare tire can be retained in its original location with this receiver. The…

view full answer...

Answer 5

Not every 2022 Kia Sorento has the factory wiring for trailer wiring so for your 2022 Kia Sorento the harness you'd want is the Tekonsha part #TK26FR which plugs in behind the rear taillight connectors and does not require factory trailer wiring…

view full answer...

Answer 6

The correct trailer wiring harness for your 2022 Kia Sorento X-Line SX-Prestige is going to depend on if you have the factory tow package or not. I have verified with the manufacturers the correct fits for your Sorento SX-Prestige, both with or…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...