Rear Right replacement leg for Lippert 3.0 6 Leg Leveling System

Question

Question:

I see there are two different legs and want to know if you can help determine which one I need. I have a 2022 forest river Rogue Vengeance 351g2 and bent the right rear leg for the system. I do not currently have access to the trailer but do I need the 22 1/2 inch or the 24 1/2 inch leg for this repair?

asked by: Scott A

0

Expert Reply:

When it comes to replacing the right rear leg on your 2022 Forest River Rogue Vengeance The Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System # LC344792 is the one you need.

Replaces 1 rear right leg for your Lippert Ground Control 3.0 automatic leveling system ( # LC358590 or # LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad ( # LC225598) is sold separately

expert reply by: Noah E

0

Answer 1

So it sounds like it is the "passenger's" side of the trailer which would be the right side. That would mean rear leg #LC344792 is the correct replacement for you.

view full answer...

Answer 2

Yes, I do have an idea regarding the Out of Stroke issue you are seeing on the Lippert Ground Control 3.0 #LC675817. According to the instruction manual, the issue is likely a bent or damaged jack (or jacks), especially since you have already done…

view full answer...

Answer 3

On the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote - 4-Point Set #LC358590 the best thing to do to check you level is to recalibrate your system. You do this by resetting your zero point. See the attached…

view full answer...

Answer 4

Yes, the Replacement Right Rear Leg #LC344792 is the correct unit to replace the rear passenger side jack on your Lippert Ground Control 3.0 System. I reached out to my contact at Lippert and he said there aren't any specific torque specs that…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

For your 4 point Lippert Ground Control leveling system the correct wiring harness you need for the right/rear jack is the part #LC65ED and then for the correct replacement jack you would need the part #LC428493 and you'd be set with everything…

view full answer...

Answer 7

The Replacement Left Rear Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1 #LC305339 has the following dimensions: 9 inch diameter foot plate 23-1/2 inches tall without foot plate 8-1/2 inches wide at widest point…

view full answer...

Answer 8

You should be fine as long as the rubber of the seal is intact and the metal is not deformed. There is a ridge in the hub that would prevent the seal from getting pressed in so far that the seal would interfere with the bearings. I confirmed this…

view full answer...

Answer 9

All of the brake hoses, including the main brake line, are made of rubber on the 20 foot Kodiak Hydraulic Brake Line Kit - Tandem Axle #20TA-BLKIT. The hoses on the #20TA-BLKIT also have brass fittings with stainless steel flares.

view full answer...

Answer 10

The Furrion 2-in-1 Range Oven with Glass Cover #FR97KR is actually really close to the dimensions of your 21 inch Magic Chef so this would be an easy and great replacement solution that would fit perfectly.

view full answer...

Answer 11

The only way I can help is with a complete replacement option as when Lippert bought out Atwood they discontinued the Atwood Leveleg parts so a replacement controller is no longer available. Instead I recommend replacing your system with the Lippert…

view full answer...