How To Upgrade Equal-i-zer Weight Distribution System from 10K to 14K

Question

Question:

Can you tell me what I need to change my equalizer 10,000 hitch to a 14,000. Thanks,

asked by: Nathan K

0

Expert Reply:

In order to upgrade an Equal-i-zer Weight Distribution System from 10,000 lbs to 14,000 lbs you'll need the Replacement Head part # EQ90-02-1400 and Replacement Spring Bars part # EQ90-01-1499. The rest of the parts will all carry over.

expert reply by: Conner L

0

Answer 1

You will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" #C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the…

view full answer...

Answer 2

The crosstube of the Curt hitch part #C15409 does hang a bit lower but where the hitch opening is will be about the same as the Draw Tite #41929. Reason being the hitch opening attaches to the bottom of the tube on this hitch. So in reality the hitch…

view full answer...

Answer 3

When it comes to installing a trailer hitch on your 2014 Ram 3500 The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2 inch #15400 is confirmed to fit your 2014 Ram 3500. The Curt Hitch #C15409 is not confirmed to fit your vehicle. This hich…

view full answer...

Answer 4

Yes, the Curt trailer hitch #C15409 will fit a 2007 Ram 2500 if it has the OEM trailer hitch. The Curt hitch will fit under the OEM hitch. I have included a link to a video showing a typical installation of this hitch and a link to the instructions…

view full answer...

Answer 5

The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15409 is designed to fit below the factory hitch receiver on your 2008 Ram 3500 dually. The top of the Curt receiver will be 8-1/2 inches from the bottom of the frame where it…

view full answer...

Answer 6

When it comes to square tubing, there is always going to be a degree of tolerance even with the most precision manufacturing. The tolerance of the Curt trailer hitch receivers such as the Curt Trailer Hitch Receiver part #C15409 is around .050"…

view full answer...

Answer 7

I spoke my contact at Equal-i-zer and he told me that since it has 1 1/2" bars it is probably rated for 12,000 lbs. He said the way to tell for sure is to measure the bolt channel. If it measures 3/8" it is a 12,000 lb hitch, if it measures…

view full answer...

Answer 8

It is usually possible to replace the spring bars in a weight distribution hitch setup so long as the two sets of bars are the same type, both trunnion style for instance, and both are from the same generation of hitch. A 10-year-old setup may not be…

view full answer...

Answer 9

It could be some sort of issue with the steel on your Equal-I-zer weight distribution system #EQ37140ET. Frequent overloading of the hitch could also cause this issue. I'm not saying that you overload the system but that is just one possibility.…

view full answer...

Answer 10

To upgrade an Equal-i-zer system to 1,400 lb tongue weight spring bars you need a new head like with the Replacement Head for Equal-i-zer Weight Distribution Systems #EQ90-02-1400 as well as higher rated spring bars with the part #EQ90-01-1499 and…

view full answer...

Answer 11

It sounds like you are looking to upgrade your Equalizer Weight Distribution setup from a 1,200 lb tongue weight setup to a 1,400 lbs setup. To do that you will also need to upgrade the head since the bars are all made to fit one specific head. For…

view full answer...

Answer 12

I am sorry to hear about your recent accident! To replace the factory hitch I recommend taking a look at the Curt Class V Trailer Hitch #C15409 that will line right up to existing holes in the Ram's frame rails for a no-drill installation and is…

view full answer...