Timbren Rear Vehicle Suspension Installation - 2007 Dodge Ram 2500 Video

We recommend having at least 6 inches of clearance between the overhang of a 5th Wheel trailer and the top of the truck's bed rails. Maintaining this space can be a bit harder with a lifted truck but there are certainly ways to try and adjust for…

It could be the motor but it could also be the screw/nut inside the jack leg that is causing the problem. Since you mentioned that it is hard to crank it manually I suspect that it is likely the screw and/or nut. On jacks that have an ACME screw the…

For your 2006 Dodge Ram 2500 with a slide-in truck camper, the best suspension enhancement is from Timbren, and is their heavy-duty kit, which is the following part number: - Timbren Suspension Enhancement System #T94VR The #T94VR is made…

The correct Timbren kit for a 2004 Dodge Ram 2500 with slide-in camper is the Timbren Rear Suspension Enhancement System part #T94VR. I confirmed this with Timbren for you. This is the model designed for service applications.

You will definitely be able to install the Curt Trailer Hitch Receiver - Class V XD - 2" #C15409 on your 2006 Dodge Ram 2500 yourself without the need for a professional. The reason for that is because no drilling is required to install the…

The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2" #C15409 is designed to fit below the factory hitch receiver on your 2008 Ram 3500 dually. The top of the Curt receiver will be 8-1/2 inches from the bottom of the frame where it…

When it comes to square tubing, there is always going to be a degree of tolerance even with the most precision manufacturing. The tolerance of the Curt trailer hitch receivers such as the Curt Trailer Hitch Receiver part #C15409 is around .050"…

Yes, the Curt trailer hitch #C15409 will fit a 2007 Ram 2500 if it has the OEM trailer hitch. The Curt hitch will fit under the OEM hitch. I have included a link to a video showing a typical installation of this hitch and a link to the instructions…

When it comes to installing a trailer hitch on your 2014 Ram 3500 The Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2 inch #15400 is confirmed to fit your 2014 Ram 3500. The Curt Hitch #C15409 is not confirmed to fit your vehicle. This hich…

The Class IV and Class V hitches we offer for your 2008 Ram 2500 pickup, viewable on the link provided for you, are designed for use on trucks that have a factory-installed standard bumper or in conjunction with a factory welded on hitch. We have no…

You probably can't remove the factory hitch on your 2008 Dodge Ram 2500. They are usually welded on as part of the bumper structure. It would not be in the way since the Curt hitch #C15409 attaches to the frame around the factory hitch and the…

This Curt Trailer Hitch Receiver, part #C15409, is a confirmed fit for your 2007 Dodge Ram 3500 dually and would work very well for you. I attached installation instructions for this product for you to check out also. You may be interested in the…