Replacement Equalizer Weight Distribution Spring Bars to Increase Capacity
Question:
Thank you for your response to my question. As you suggested, I have attached a couple pictures. If you need additional pictures let me know. I couldn't find a part number on the head itself.
asked by: Tom Z
Expert Reply:
It is usually possible to replace the spring bars in a weight distribution hitch setup so long as the two sets of bars are the same type, both trunnion style for instance, and both are from the same generation of hitch. A 10-year-old setup may not be able to use current-model replacement spring bars.
Based on your trailer dry hitch weight of 918-lbs (which I presume means the trailer's unloaded weight) bars rated for 1200-lbs may not be stiff enough. A properly-loaded 8800-lb trailer could have tongue weight (TW) ranging from a low of 950-lbs to as much as 1250-lbs.
Ideally your WD system will be rated such that your total TW, which includes the weight of cargo in the vehicle that sits behind the rear axle (cooler, generator, etc), is near the middle of the system's range. I would not use a 1200-lb maximum WD hitch if your actually total TW is 1200-lbs. Instead I would use one rated for between 1000- and 1500-lbs.
Equal-I-zer setup # EQ37140ET is their highest-rated and works for TW from 1000- to 1400-lbs. The bars only for this are part # EQ90-01-1499, which is sold as a set of two.
I suggest you send us some photos of your head assembly along with any part numbers you can find so we can confirm with Equal-I-zer that you can use this set of bars.
I also recommend you use Tongue Weight Scale # e99044 to allow you to accurately measure the fully-loaded trailer TW.
Products Referenced in This Question
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Thin Walled Socket for Equal-i-zer Hitches
- Accessories and Parts
- Weight Distribution Hitch
- Tools
- Socket
- Equal-i-zer
- Equal-i-zer
more information >
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1400 lbs TW
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 400 lbs TW
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Are Replacement Spring Bars Available For The Curt TruTrack 4P Weight Distribution System # C74RV
- Shop: Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW
- Shop: Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,400 lbs TW
- Video: Review of Fastway - Weight Distribution - FA94-02-1059
- Q&A: Are Equal-i-zer Spring Bars Interchangeable With Same Head Unit?
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Shop: Replacement Spring Bars for Equal-i-zer Weight Distribution Systems - Qty 2 - 1,200 lbs TW
- Shop: Replacement Spring-Bar Release Clip for Fastway e2 Weight Distribution Systems with Round Bars
- Shop: Replacement Spacer Rivet for Fastway e2 Weight Distribution Head
- Shop: Replacement Hardware Kit for Fastway e2 Weight Distribution Head - Round and Trunnion Bar
- Q&A: Does The Voyager WiSight 2.0 Camera System Have A USB Power Cord For The Monitor
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Video: Review of Equal-i-zer Replacement Spring Bars For Weight Distribution Systems - EQ90-01-1499
- Video: Review of Voyager Universal Monitor Mount - VOSHD6MNT
- Shop: Suspension Enhancement
- Shop: Base Plate for Tow Bar
- Shop: Vehicle Cargo Control
- Search Results: tongue weight scale
- Shop: Vehicle Tow Bar Brake System
- Q&A: Backplate Screw Size for Voyager RV Observation System
- Search Results: 1469dat
- Search Results: gooseneck adapter
- Search Results: safety chain
- Search Results: safety chain extension
- Q&A: Should I Go With The 12K Or 14K Equal-i-zer Hitch For My 10K GVWR Travel Trailer
- Search Results: curt trutrack
- Search Results: pd4655liv
- Video: Review of Equal-i-zer Replacement Spring Bar Weight Distribution System 1200 LBS TW - EQ90-02-1299
- Q&A: Replacement Spring Bar Retainer Clips and Pins for Curt Weight Distribution System
Tom
2/22/2018
Thank you for your response to my question. As you suggested, I have attached a couple pictures. If you need additional pictures let me know. I couldn't find a part number on the head itself.