Degree of Tolerance for Curt Trailer Hitches
Question:
I have a 2006 Ram 3500 with a Curt 15573 hitch purchased from etrailer. The hitch is about 7 years old. The 2inch opening and the hitch pin hole have become enlarged to the point that there is excessive slop. I measured the 2inch opening to be 2.125 inch while the stock receiver is 2.050 inch. I am considering the C15409 as a replacement. What does the 2inch opening measure? I feel that the 15573 may have had a larger 2inch opening than stock when new. Thanks
asked by: Andrew
Expert Reply:
When it comes to square tubing, there is always going to be a degree of tolerance even with the most precision manufacturing. The tolerance of the Curt trailer hitch receivers such as the Curt Trailer Hitch Receiver part # C15409 is around .050" which means the opening can be anywhere between 2.070" and 2.115". With that being said it is always possible for the hitch pin hole or receiver tube opening to deform slightly after extended use near the capacity but the above hitch has a Class V XD rating which means it is top of the line in regards to strength.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2550 lbs TW
- 17000 lbs GTW
- 17000 lbs WD GTW
- 2 Inch Hitch
- 2550 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Shop: Trailer Wiring
- Shop: Bulldog Lifelong Trigger-Style Coupler Lock and 2" Trailer Hitch Receiver Lock - Chrome
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Q&A: Installation Difficulty of Curt Trailer Hitch 15409 for 2006 Dodge Ram 2500 With Factory Hitch
- Video: Timbren Rear Suspension System Installation - 2003 Dodge Ram
- Video: Timbren Rear Vehicle Suspension Installation - 2007 Dodge Ram 2500
- Video: Timbren Rear Suspension System Installation - 2009 Dodge Ram
- Shop: Suspension Enhancement
- Search Results: hitch cargo carrier 1.25
- Search Results: equalizer shank
- Search Results: hitch carrier
- Search Results: hitchgrip
- Search Results: shank
- Search Results: hitch accessories
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: VueSMART RV and Trailer Backup Camera - Wireless - Universal Mount - 152-Degree View
- Article: 2023 Best Gifts for RVers & Campers
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Hitch For A 2014 Ram 3500
- Q&A: Do Curt and Draw Tite Hitches for 2007 Dodge Ram 2500 Hang at Same Height
- Q&A: Will Curt Trailer Hitch 15409 Fit a 2007 Dodge Ram 2500 with Factory Installed Trailer Hitch
- Q&A: Recommended Trailer Hitch and Extension for 2008 Ram 3500 Dually with Dual Receivers
- Video: Trailer Hitch Installation - 2004 Dodge Ram Pickup - Curt C15409
- Video: Best 2008 Dodge Ram Pickup Suspension Enhancement Options
- Video: Best 2008 Dodge Ram Pickup Hitch Options
- Video: Powerbuilt 12 Point Socket with 3/4 Inch Drive Review
on Trailer Hitch
