Recommended Suspension Enhancement For a 1996 Fleetwood Bounder 28T on Ford F-53 Chassis V8 Engine  

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 -…

The Progressive Dynamics Converter #PD4655V is specifically designed to replace the WFCO 8955 you have on your 2014 Thor Hurricane 27K motorhome. This is compatible with your two 6volt batteries as they are going to be wired in series to create 12V…

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

The Roadmaster Rear Anti-Sway Bar #RM-1139-143 that you referenced is designed to work with a factory sway bar and not replace it. For more information on this sway bar check out the review video and install instructions link I attached.

I was able to get the measurement you were looking for from the spring to the top of the bracket of the Timbren Front Suspension Enhancement System #TFFF53B. As you can see in the accompanying photo, that length is 7 inches. This is a fit for the…

You're on the money with what you need to improve the handling of your 2022 Fleetwood Bounder 33C motorhome. Big rigs like yours (which is on a Ford F53 chassis) can be very taxing due to how hard you have to work to keep it in line, so the best…

I spoke with my contact at Lippert regarding the 366043 model motor/gear box assembly for your Kwikee Steps. He stated that the correct replacement motor is the Lippert Kwikee Motor #LC379147 and for the gear box you will use #LC379160. These will be…

There are several possible options for anti-sway bars and steering stabilizers depending on how your F-53 chassis is configured and what motor is in the RV. I have included a link to the options for you. Use the drop down menu to choose the motor…