Does the Roadmaster Rear Sway bar # RM-1139-143 Replace Factory Sway Bar

Question

Question:

Does this bar replace the factory bar? Or is it used with the factory bar?

asked by: Lee

0

Expert Reply:

The Roadmaster Rear Anti-Sway Bar # RM-1139-143 that you referenced is designed to work with a factory sway bar and not replace it.

For more information on this sway bar check out the review video and install instructions link I attached.

expert reply by: Jameson C

0

Michael F.

5/16/2020

sway control for 2004 gulf stream independence 33 ft 24000# and a performance chip device for same with f550 chassie with ford v-10. make me a deal please. so i can afford some kind of retirement. im 67 and if to costly either i wont beable to afford to travel but if my lady finds out it wont matter as i will be DOA.

Reply

Chris R.

5/19/2020

For a rear sway bar the Roadmaster # RM-1139-143 will work perfectly on your F-550 chassis. For the front you will use part # RM-1139-140. At this time we don't have any performance chips/tuners that are designed for this RV chassis. Pricing is listed on the product page. I wish I could ensure your safety but we don't have any current deals going on other than free shipping on orders over $99.

Reply

Answer 1

There are several possible options for anti-sway bars and steering stabilizers depending on how your F-53 chassis is configured and what motor is in the RV. I have included a link to the options for you. Use the drop down menu to choose the motor…

view full answer...

Answer 2

I was able to get the measurement you were looking for from the spring to the top of the bracket of the Timbren Front Suspension Enhancement System #TFFF53B. As you can see in the accompanying photo, that length is 7 inches. This is a fit for the…

view full answer...

Answer 3

To improve the handling of your 1994 Ford F-53 motorhome the biggest improvement you can make is with a rear sway bar like the Roadmaster part #RM-1139-143 which is a custom fit for your motorhome. We do not have any front sway bars or lift kits that…

view full answer...

Answer 4

The 2016 Fleetwood Flair 30U Class A motorhome is built on a Ford chassis and we do offer rear anti-sway suspension enhancement kits for it. For either the V10 or V8 version you will use Roadmaster #RM-1139-143 since your RV is less than 34-feet in…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...