Replacement Top Seal For Main Slide Out On My 2002 Damon Intruder 375

Question

Question:

I am trying to find the top seal for my main slide out on my 2002 Damon Intruder 375. Can you assist me in finding the correct part please? It is a 10' slide and the seal has a width of 3-5/8". Thanks!

asked by: Craig R

0

Expert Reply:

I will be more than happy to help you find a replacement part for your 2002 Damon Intruder 375. You will need the Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 15' Long x 3-3/16" Wide, part # SR98FR. This seal is 15' long, so you will have to cut it to size.

I have included a product description link and a video review link below.

expert reply by: Mark Smith

0

Customer's Seals 1
(click to enlarge)

Customer's Seals 2
(click to enlarge)

Answer 1

We can help you pick out a slide topper for the slide out of your R-Pod. Can you get me the width of your slide out including the flange?

view full answer...

Answer 2

In order to determine the type of replacement seal is needed for your 2008 Forest River Cedar Creek Silverback, you're going to need to remove a portion of your existing seal first to get an accurate side profile and measurement. There are a…

view full answer...

Answer 3

Yes, you'll want the Solera RV Slide-Out Awning - 6'1" Wide - 48" Projection - Black Item #LCV000165063.

view full answer...

Answer 4

The Rubber Wiper Seal and Bulb for RV Slide Out #SR98FR that you referenced installs with an adhesive backing that attaches to the RV frame that surrounds the slide out. There are quite a few different setups and ways it can install though so…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...