2017 R-Pod 178 Slide Out Awning Fit Recommendation

Question

Question:

Can you retro a slide awning on the 2017 R-Pod 178 and which one would you use if you can Thanks

asked by: Chris

0

Expert Reply:

We can help you pick out a slide topper for the slide out of your R-Pod. Can you get me the width of your slide out including the flange?

expert reply by: Jameson C

0

Chris

9/18/2020

Can you retro a slide awning on the 2017 R-Pod 178 and which one would you use if you can Thanks

Reply

Jameson C.

9/18/2020

Thanks for getting me that info. Based on that the correct slide topper is the part # LCV000165063.

Reply

Answer 1

The Thule HideAway Awning - Direct Mount - Waterproof - 80 sq ft #TH490011 will mount directly to the side of your 2015 Forest River R-Pod trailer with the included mounting brackets and hardware. It will require drilling directly into a stud/support…

view full answer...

Answer 2

We have all the parts necessary to add an awning to your R-Pod 193. To add a10' Awning #LCV000211447 you will need: - Solera Manual Pull Style Awning Drive Head #LC271181 - Solera Manual Pull Style Awning Idler Head #LC272397 - Solera Manual…

view full answer...

Answer 3

Yes, the Thule Hideaway Awning #TH490011 is a direct bolt on awning that will mount directly to the side of your 2016 Forest River R-Pod Travel Trailer. This awning measures in at 9' 10" Long, 8' Wide, includes all the needed hardware…

view full answer...

Answer 4

To use the Medium QuickFit Tent for Thule HideAway Awnings item #TH307056 with your 2016 R-Pod 179 Camper, you are going to need the Thule HideAway Awning item #TH490011. The Hideaway awning attaches directly to the side of your camper with included…

view full answer...

Answer 5

The Thule HideAway Awning - Wall Mount #TH490011 that you referenced was designed to attach to a van wall and we've had customers attach it to the side of trailer walls in the past and it worked well for them. Now whether your wall is strong…

view full answer...

Answer 6

To install the Thule HideAway Awning #TH490011 to your Forest River R-POD 178 you are correct that you will need to mount the brackets to a support stud. The locations of the support studs can be provided by the manufacturer of your R-POD, and you…

view full answer...

Answer 7

I checked with Lippert and the correct Solera RV Slide-Out Awning for a 70" slide-out is part #LCV000165063 for black and part #LCV000163279 for white. The next size up won't work as the extension rods would not reach the hex brackets. The…

view full answer...

Answer 8

For a trailer with a slide-out that has a flange to flange measurement of 71-1/4" you're looking for the Solera RV Slide-Out Awning - 6'1" Wide - 48" Projection - Black #LCV000165063. This awning is designed for slide-outs up…

view full answer...

Answer 9

For the Solera RV Slide-Out Awning, #LCV000165063 and all other awnings in this category, if at all possible, you will want to mount with a three inch height above top of slide out flange so as to provide the needed slope for proper draining when…

view full answer...

Answer 10

Yes, you'll want the Solera RV Slide-Out Awning - 6'1" Wide - 48" Projection - Black Item #LCV000165063.

view full answer...

Answer 11

I will be more than happy to help you find a replacement part for your 2002 Damon Intruder 375. You will need the Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 15' Long x 3-3/16" Wide, part #SR98FR. This seal is 15' long, so…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

2017 R-Pod 178 Slide Out Awning Fit Recommendation

Product Page this Question was Asked From

Continue Researching