Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4
(32 reviews)
Price: $183.80
In Stock
Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4
Item # INXP
Retail:$236.25
Our Price: $183.80
You Save: $52.45
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (32)
- Q & A (0)
- Photos
- Used (1)
Inno Roof Rack - INXP
- Feet
- 4 Pack
- Inno
These durable feet help mount 2 Inno square crossbars to your vehicle's factory track system or fixed mounting points. The feet mount to your roof with base units and tighten with locking levers to secure system to roof.
Features:
- 4 Feet let you mount Inno square crossbars onto your vehicle's factory tracks or fixed mounting points
- Pair with 2 square crossbars and fit hooks (sold separately) to create a complete roof rack
- Base units secure feet to fit hooks
- Fit hooks bolt to tracks for fixed mounting points
- Locking levers secure rack to roof
- 2 Keys included
- Snap-on covers protect base units when feet are removed
- Black color
Specs:
- Weight capacity: 165 lbs
- Always observe your vehicle's maximum roof load capacity
- Dimensions: 4-3/4" wide x 4" long x 3-1/2" tall
- Limited lifetime warranty
IN-XP Inno Square Bar Stays for OEM Tracks or Fixed Mounting Points - Qty 4
Replaces INXR
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not fit
Customer Reviews
Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4 - INXP
Average Customer Rating: 4.5 out of 5 stars (32 Customer Reviews)
These durable feet help mount 2 Inno square crossbars to your vehicle's factory track system or fixed mounting points. The feet mount to your roof with base units and tighten with locking levers to secure system to roof.by: Robert08/02/2018
2010 Lexus GX 460
If you're a Lexus GX460 owner, think the OEM cross bars are wimpy, and don't want to shell out $500-$600 for "aero" style bars, this is for you.
I chose the Inno INXP base over the INTR base because I thought it looked sleeker, and I wanted as much clearance over the shark fin antenna as I could (although both bases clear the antenna, the INXP is taller). The product description is slightly different for the two bases, but both of them are able to slide along the factory flush rails. Choosing between the two is a matter of taste.
A couple of hints for installation:
-I didn't receive an English copy of the installation instructions for the base, but was able to figure it out anyway. You could easily find them online.
-The screws that come with the base aren't needed, use the longer ones that come with the fit kit.
-Loosely attach the fit hooks, clip the base on top, slide the rail through, THEN tighten the screws.
-When putting the fit hooks on the rails before putting the base on top, make sure the screws are backed out as much as physically possible without disconnecting. Even still there is very little play when sliding the rails through before tightening everything down. It would be nice if the screws were even 1/8" longer, but it would only make installation easier. Once everything is tightened down it's as solid as can be.
Overall I'm very happy. I like the more rugged look of the square bars, and shaking them moves the whole vehicle and they don't budge.
by: Adam05/02/2018
2010 Subaru Impreza
My order showed up quicker than expected and installed without too much hassle by myself. My only issue is that I expected the adapter parts to level out the mounting feet so that the two cross bars are in line. But nothing like that occurred so the bars sit at an able to each other. Maybe I'm missing something, but it seems to still work, just not what I expected.
by: Kevin 01/06/2024
Very sturdy and well made. The initial fitting took me a few times reading the directions to grasp, but it was also early in the morning so that could have been a user issue. Once all was tightened down though they are rock steady and along with the pads and bars hauled my kayak with ease.
by: Daniel06/21/2022
These bases seem to be made of rugged and reliable materials however I cannot figure out how to get them onto the track Is of my Leer truck cap. This product claims to fit tracks, but I can't see how without some sort of a pedestal that attaches to the track.
by: Jan 11/09/2022
The Inno product allowed us to use our older style square Thule bars with two Hullavators on our new vehicle which saved us many headaches and money.
by: Augie B.06/09/2016
Mazda
Great product and GREAT service. These feet fit my INNO B117 square bars and base brackets for a perfect fit on my Mazda 5 wagon. Took about 40 minutes to install the whole rig. Jonathan at etrailer was a huge help, and got these to me in two days.
Augie B.
1/19/2018
Have been using Inno rack on our Mazda 5 for a year now and it works great!
by: Mark 01/10/2024
Fit perfectly. A bit expensive but what isn’t anymore.
by: Manuel 06/05/2023
Pretty cool setup, instructions just need to to be better and all parts should be in one box
by: Rob08/24/2023
The quality and strength of the steel was never in question, and everything bolted up as normal.
by: Richard09/26/2022
2022 Toyota RAV4
Same as for the install kit. Too many part, too much install, and I didn't have the confidence in it that I would like. I think they try to adapt a 'standard' kit and then wind up having to include more hardware to make it work. Disappointing.
by: Michael03/17/2022
I ordered roof racks for our new to us car. Once I placed the order I decided I wanted longer cross bars. I cancelled the bars on the order but couldn't figure out to add the bars I wanted. I called etrailer and was connected to Ashley. Ashley helped me to get the bars I wanted. She kept in touch, letting me know about shipment, a slight delay in the shipment and when the shipment was expected to arrive. Ashly gave my purchase a personal touch that I really appreciated.
by: Thomas09/01/2022
Did. It come with obviously needed steel fittings to attach to roof rails. Needed to order separately and none in stock
by: Peter04/05/2018
2017 Subaru Forester
It arrived with all its parts and all in good shape. Instructions for assembly were clear and it fit the car as needed. Since, it has done everything expected of it.
Peter
4/5/2019
Thanks for bothering. Still very satisfied.
by: Robert02/24/2022
Adam got me the right product for my custom naked roof when two other sales people failed.
by: Mark05/16/2022
As described. Easy to install and works well. one year on still very happy with this purchase.
by: Jonathan04/07/2022
Can’t give accurate rating seeing as I sold due to issues finding the fit kit for my vehicle
by: John 08/13/2022
Quality product. Will give years of use.
by: Tad 02/27/2024
by: Happy C09/08/2021
Great fit and great price.
by: David 05/23/2023
by: Frank 11/23/2021
by: Lindsey 05/05/2021
by: Lee 04/17/2024
2015 Lexus GX 460
by: Jared 07/19/2021
by: Glen09/23/2022
25
32
Show More Reviews
See what our Experts say about this Inno Roof Rack
- Are Thule and Inno Square Crossbars Same DimensionsINNO square crossbars and Thule square crossbars are the same dimensions, 7/8 inch by 1-1/4 inch so a INNO foot like the part # INXP would fit both.
view full answer... - Do I Need An Additional Fit Kit To Attach The INXP Feet To The T-Tracks?Hey Mike, so the Inno Feet for Square Crossbars # INXP come with everything you need to attach to the T-slot tracks on your camper. No additional fit kit is required.
view full answer... - Roof Rack Foot that Can Fit Older Thule Square Bars and Roof TrackFor the older style Thule square bars the only foot solution that works with them is the Inno feet like the part # INXP which fit roof tracks like you have. The Inno bars are the same shape as the older Thule bars and Thule went to a new design where there square bars attach with a channel along the bottom of the bar.
view full answer... - Compatible Roof Rack Feet for Thule Square Loadbar and Thule Tracks on Truck TopperThule has discontinued the load bars you are describing and also the Thule Traverse Roof-Rack Foot Pack TH480. The best option to use your bars in the tracks is the Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4 # INXP. This will accept the Thule load bars and be a good fit for you.
view full answer... - Parts Needed to Install Older Thule Square Bars on 2020 Subaru Impreza SedanInno's square bars are the same shape as the Thule bars so what you'd need to reuse your Thule square bars is the feet set part # INXP and the fit kit # INTR145 and you'd be set.
view full answer... - Using Old Thule Square Bars for 2009 Subaru Impreza 5 doorI reached out to my contact at Thule about a possible fit for the discontinued square bars you are referring to. Unfortunately there is no longer a foot pack they offer (the Tracker has been discontinued) that will work with your crossbars but I do have a solution for you. You can use the Inno Inno Feet for Square Crossbars # INXP and the Custom Fit Kit # INTR128. This combination will work with your older Thule square load bars.
view full answer...
- What Tracks Does Inno Square Bar Roof Rack Feet INXP FitThe Thule feet for square crossbars part # INXP are a direct fit for the tracks of camper shells like what is commonly found on ARE or Leer campers shells. Or you could use 42 inch long tracks like the part # THTP42.
view full answer... - Solution to Allow Older Thule Square Crossbars to Fit Truxedo TS Rails of TonneauThe Inno foot kit part # INXP does fit the TS rails of your tonneau cover and is compatible with your Thule older square bars so it would be the solution you are looking for.
view full answer... - Can Old Thule Square Crossbars Fit 2024 Toyota RAV4 With Flush Mounted RailsYou can use your old Thule square crossbars on your 2024 Toyota RAV4. The Thule square bars have the same dimensions as the Inno so you can use the # INXP along with the # IN33FR to mount them.
view full answer... - Mounting Older Thule Square Bars to 2022 Toyota RAV4 With Flush Mounted RailsThe older Thule square crossbars and Inno square crossbars are the same dimensions - 1-1/4" by 7/8" like you said, so you can indeed use your older Thule square bars with the Inno feet and fit kit (which you do need). So long as your crossbars are 46" long (or longer), you can use the following set up to mount your older Thule square bars on your 2022 Toyota RAV4: - Inno Feet for Square Crossbars # INXP - Custom Fit Kit # IN33FR
view full answer... - Recommended Inno Square Crossbar Feet for Pace Edwards UltragrooveThe Inno Square Crossbars - Steel - Black - 79" Long - Qty 2 # IN436L can mount to your Pace Edwards Ultragroove using the Inno Feet for Square Crossbars # INXP.
view full answer... - Can I Use My Old Thule Square Crossbar With Inno Roof Rack For My 2022 Toyota RAV4 W/ Flush RailsYes, you can use your old Thule crossbars, with no channel underneath the crossbar, and your Thule accessories with the Inno setup. Provided your Thule crossbars are at least 46" and they will not extend beyond the side mirrors of your 2022 Toyota RAV4. The rest of your rack will consist of the following items. Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4, part # INXP Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack...
view full answer... - Can Old Thule Square Bars Be Used On a 2021 Toyota Rav4 with Flush RailsI have a solution for you, although the older style Thule bars will not work with a the newer Thule feet due to a change in design, you can use the Inno square bar feet like part # INXP and fit kit # IN33FR with the older thule square bars. This will fit your 2021 Toyota RAV4.
view full answer... - Will My Thule Square Crossbars Fit Inno Feet for Square Crossbars on My 2021 Toyota RAV4?Yes, the Inno Feet for Square Crossbars # INXP will fit with your Thule Square crossbars on the flush rails of your 2021 Toyota Rav4. The dimensions of the Thule Square bars and Inno Square bars are both 1-1/4" wide x 7/8" tall. In addition to the crossbars and Inno feet, you will need the Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet # IN33FR.
view full answer... - Foot Kit Recommendation For Old Thule Tracker Style Square Crossbars For 2020 Toyota RAV4 Flush RailI recommend the Inno Feet for Square Crossbars # INXP and Custom Fit Kit # IN33FR for your 2020 Toyota RAV4 with the flush rails. These will allow you to mount your older Thule square cross-bars and use all your current carriers. The Inno feet allow for a weight capacity of up to 165lbs. Currently Thule does not make feet to use with their old Tracker feet that were used to hold your bars are no longer available. I have linked a copy of the installation instructions below for the custom...
view full answer... - Parts Needed to Use Old Thule Square Crossbars on 2020 Toyota RAV4 With Raised RailsAssuming you have the older Thule square crossbars and not the SquareBar Evo, and also that your 2020 Toyota RAV4 has raised side rails, you can mount those square bars with the following: - Inno Feet for Square Crossbars - Raised Side Rails # INFR For flush rails use # INXP and # IN33FR
view full answer... - Low Profile Roof Rack Recommendation for a 2008 Suzuki Grand VitaraThe lowest profile roof rack we offer that has been confirmed to fit your 2008 Suzuki Grand Vitara would be the Inno Square rack that consists of # INB117, # INXP and # INTR502. The Rola roof rack that you referenced has not been confirmed to fit your vehicle so I cannot recommend it for yours. The bar length wouldn't be right and the attachment mechanism hasn't been tested on your vehicle.
view full answer... - Roof Rack That Allows Me To Use My Thule Square Bar Accessories On My 2016 BMW 328iYou will be able to install an Inno roof rack for your 2016 BMW 328i with fixed points. This roof rack will consist of the following items: Inno Square Crossbars - Steel - Black - 46" Long - Qty 2, part # INB117 Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4, part # INXP Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet, part # INTR131 This roof rack has a maximum weight capacity of 140 lbs. This roof rack will...
view full answer... - Inno Square Bar Roof Rack Parts for 2008 Mazda CX-9 The Inno square bar roof rack you referenced is intended for the CX-9 that has a bare roof wth no rails or crossbars on it. The complete rack does consist of three parts: # INB127, # INXP and # INTR124. These are the bars, the feet and the vehicle-specific fit kit, respectively. I verified with Inno that all of these parts are required for installing the rack on your CX-9.
view full answer... - How to Use Older Thule Square Crossbars on a 2007 Honda CR-VYes, that is exactly what you'll need to do. The Inno roof rack square bar system that fits your daughter's 2007 Honda CR-V uses the following parts: 46" Inno Square Bars - # INB117 Inno Feet - # INXP Fit Kit - # INTR121 As long as your Thule square bars are at least 46" then they will fit just fine. If they are shorter then you'll want to get the whole roof rack system, and if they are longer you just want to make sure that they won't be sticking out past the side mirrors of the CR-V....
view full answer... - What Custom Fit Kit To Install Inno Squarebar Roof Rack System on a 2014 BMW 3 Series SedanThe Inno Square Crossbars # INB117 you referenced in your question is just the crossbars for a 2014 BMW 3 Series Sedan. You will also need Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points # INXP which is the feet which the crossbars install to, and Inno Custom Fit Kit # INTR131 which is the custom fit kit to install the feet to your vehicle. These parts are confirmed to fit your vehicle and will complete the roof rack system. I included a review video for the...
view full answer... - Parts Needed to Install Inno Square Crossbars on 2008 Mazda CX-9 with Naked RoofInno crossbars are 7/8 inch tall and 1-1/4 inch wide so the dimensions you referenced would not work with the Inno feet part # INB127. Only option I have for your 2008 Mazda CX-9 that uses the foot kit part # INB127 is with the other part numbers # INXP and # INTR124.
view full answer... - What Fit Kit Do I Need For Inno Feet Part #INXP For My 2016 BMW 328i With Fixed PointsThe Inno roof rack that is compatible with your 2016 BMW 328i will consist of the following: Inno Square Crossbars - Steel - Black - 46" Long - Qty 2, part # INB117, Inno Feet for Square Crossbars - Track Systems and Fixed Mounting Points - Black - Qty 4, part # INXP Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet. part # INTR145. I have included a product description link below.
view full answer... - Parts Needed to Install 71 inch Crossbars on 2022 Lexus GX 460Since you said 71 inch crossbars wouldn't extend past the side mirrors on your 2022 Lexus GX460 it would work and be safe. You'd want to watch your head getting and and out of the vehicle and also around tight corners in like drive through lines. So for the crossbars you'd want the part # IN434 that you referenced plus the feet part # INXP and the fit kit part # INTR152. It would not be super difficult to change bars but it's not something that happens super fast if that makes sense.
view full answer...
Do you have a question about this Roof Rack?
Used Items Available
Condition: Installed
Notes: Item has been installed/test fit.
Info for this part was:
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Ronnie R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
6/27/2022
I would like to look into this for you and I have a few questions that I would like to ask. What is the year, make, and model of your vehicle? Do you already have the square Inno bars?