Black 6'1" Slide-Out Awning For A 2016 Forest River R-Pod 178 Travel Trailer

Question

Question:

I have a 2016 Forest River RPod 178. I need an Awning for the slide out which is 6’1” wide and extends 17”. The one that shows up on a search of your site is only showing a white one available. Is it available in black? Thanks

asked by: Michael M

0

Expert Reply:

Yes, you'll want the Solera RV Slide-Out Awning - 6'1" Wide - 48" Projection - Black Item # LCV000165063.

expert reply by: Kevin C

0

Answer 1

I checked with Lippert and the correct Solera RV Slide-Out Awning for a 70" slide-out is part #LCV000165063 for black and part #LCV000163279 for white. The next size up won't work as the extension rods would not reach the hex brackets. The…

view full answer...

Answer 2

We can help you pick out a slide topper for the slide out of your R-Pod. Can you get me the width of your slide out including the flange?

view full answer...

Answer 3

For a trailer with a slide-out that has a flange to flange measurement of 71-1/4" you're looking for the Solera RV Slide-Out Awning - 6'1" Wide - 48" Projection - Black #LCV000165063. This awning is designed for slide-outs up…

view full answer...

Answer 4

We can recommend items for a (our shortest width) 10' width awning or larger widths, but there really isn't a specific awning for the 2016 R-Pod 178. The shape of the R-Pod campers make it slightly more challenging for adding an awning but it…

view full answer...

Answer 5

I will be more than happy to help you find a replacement part for your 2002 Damon Intruder 375. You will need the Rubber Wiper Seal and Bulb for RV Slide Out - Stick On - 15' Long x 3-3/16" Wide, part #SR98FR. This seal is 15' long, so…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 10

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...