Curt vs. Draw-Tite Trailer Hitch Comparison for 2021 Mazda CX-5

Question

Question:

Which hitch is best for a 2021 CX-5: Curt or Draw-Tite? TIA.

asked by: Han N

0

Expert Reply:

Since the Draw Tite Hitch part # 76138 that fits your 2021 Mazda CX-5 has a slightly higher towing capacity than the Curt # C13315 it would be my recommendation as best option.

If you were looking for trailer wiring too the Tekonsha kit part # 118746 is best option as it has easiest install and most reliable converter box.

expert reply by: Jameson C

0

Answer 1

No, its not but I have a better option. Instead of the Anti-Rattle Hitch Pin for 2" Trailer Hitches item #SHP2061, I recommend the etrailer Anti-Rattle Hitch Stabilizer for 2" Hitches item #e99007. This can be used with any 2" ball…

view full answer...

Answer 2

This is the Lets Go Aero Anti-Rattle Hitch Pin for 2" Trailer Hitches #SHP2061. We do not offer SHP359 but it is a similar design. You are correct the main difference between the two is that #SHP2061 includes the pin sleeve that helps reduce the…

view full answer...

Answer 3

We can get you set up with the trailer hitch receiver, wiring harness and brake controller you need for your 2018 Mazda CX-5, starting with the hitch, and for that I recommend the Draw-Tite Trailer Hitch Receiver #76138. I prefer the Draw-Tite over…

view full answer...

Answer 4

Sportframe is the brand name Draw-Tite uses for some of its Class 1 trailer hitches. It doesn't denote a special fit or design. For your vehicle we offer both Class II hitches (1-1/4 inch receiver tube) or Class III hitches with a 2 inch receiver…

view full answer...

Answer 5

Draw Tite and Curt are two different companies who came up with different ways to attach their Class III hitches to your 2016 Mazda CX-5. The big difference being that the Draw Tite #76138 attaches to the bottom of the frame rail whereas the Curt…

view full answer...

Answer 6

Yes, you can absolutely travel on the highway at highway speeds using the Curt Cargo Carrier #C18113. This is a great option for a cargo carrier because it is aluminum so it is extremely lightweight at just 25 lbs, making it much easier than other…

view full answer...

Answer 7

We have the Curt Class III hitch part #C13315 as a confirmed fit for your 2020 Mazda CX-5 that is very similar to the Draw Tite part #76138 but at this time (March 2020) this hitch has not been carried over for the 2020 models.

view full answer...

Answer 8

Since the pinhole on the shank of the Curt 30x50 Cargo Carrier #C18113 is not threaded, a locking hitch pin is what you need to lock the carrier. If you are looking for a locking hitch pin to protect your carrier from theft, the perfect fit is the…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

For your 2021 Mazda CX-5 I recommend going with the Curt Trailer Hitch Receiver #C13315 you mentioned over the Draw-Tite #76138 due to the Curt hitches being made in the USA, and them having a tougher powder coat finish which we have noticed holds up…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Curt vs. Draw-Tite Trailer Hitch Comparison for 2021 Mazda CX-5

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching