Recommended Trailer Hitch Receiver, Wiring Harness and Brake Controller for 2018 Mazda CX-5
Question:
Hi, I have a 2018 Mazda CX-5 Touring with no factory installed towing gear. Id like to set it up with a 2 class 3 hitch receiver that looks as unobtrusive as possible, plus the wiring and mounting so I can tow either a utility trailer that uses a 4 way flat connector or a small camper that uses a 7 way connector with electric brakes. It seems like the Draw-Tite 76138 and the Curt 13315 are the options for the receiver. It also looks like Curt and Tekonsha make wiring harnesses with modulator for the 4 pin flat, and you have some kits that include wiring harnesses for both 4 and 7 pin. I guess Id also need a mount for the 4 and 7 pin brackets. Im new at this and getting a little confused. What do you recommend that I get for the entire set of parts Ill need? Thanks!
asked by: Jeff
Expert Reply:
We can get you set up with the trailer hitch receiver, wiring harness and brake controller you need for your 2018 Mazda CX-5, starting with the hitch, and for that I recommend the Draw-Tite Trailer Hitch Receiver # 76138.
I prefer the Draw-Tite over the Curt Trailer Hitch # C13315 or etrailer Trailer Hitch # e98902 due to the Draw-Tite's larger capacities which speak to its overall strength, but essentially the two are otherwise interchangeable so you can go with the least expensive option and won't be at any disadvantage. I have added a link to a video install for you to check out as well.
Since you mentioned you would be towing trailers with a 4-way and a 7-way you will need to add a 7-way, and to install it the first thing you will need to add is a 4-way, the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118746.
You should note this is designed to store in your spare tire area so you'll need to find a way to get the connector underneath your Mazda, possibly by enlarging a hole underneath the spare tire. After that, to get the 7-way connector, circuit breakers, and the rest of the hardware needed to install a brake controller you need the Universal Installation Kit for Trailer Brake Controller # ETBC7.
For a brake controller I recommend the Brake EVN # TK63VR.
This is an easy-to-use, highly effective proportional controller that is going to serve you very well but at a lesser cost than other "name" brands. To install this you will also need the Brake Control Plug-In Harness # 20127.
And for mounting the 7-way, because the hitch is recessed under your Mazda's fascia, you will need to use the Curt Easy Mount Bracket # C58000.
I have added links to video installs and reviews for you to check out as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Draw-Tite
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- etrailer
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Tekonsha BRAKE-EVN Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Automatic Leveling
- Under-Dash Box
- Up to 4 Axles
- LED Display
- Up to 90 Degrees
- Tekonsha
more information >
Product Page this Question was Asked From
Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- 6 Round
- 7 Round
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Anti-Rattle Device for a 2 Inch Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Shop: Curt Anti-Rattle Kit for Hollow Shank Accessories - 2" Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: 22-1/2x49 Curt Cargo Carrier - 2" Hitches - Aluminum - 500 lbs
- Shop: Anti-Rattle Hitch Pin for 2" Trailer Hitches
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: c22321
- Search Results: anti rattle pin
- Search Results: cargo carrier
- Search Results: stabilizer bracket
- Search Results: anti rattle
- Video: Curt Hollow Shank Accessories Anti-Rattle Kit Review
- Video: Curt Aluminum Cargo Carrier Review
- Q&A: Can Curt Aluminum Cargo Carrier be Used at Highway Speeds
- Q&A: Curt vs. Draw-Tite Trailer Hitch Comparison for 2021 Mazda CX-5
- Q&A: Which Hitch for 2020 Mazda CX-5
- Q&A: What is Needed to Secure Curt Aluminum Cargo Carrier # C18113
- Q&A: Difference between Lets Go Aero Anti-Rattle Hitch Pin SHP2061 and SHP359
- Shop: Trailer Hitch
- Search Results: 44649
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Shop: Brake Controller
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Search Results: 68149
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
on Accessories and Parts
