What is Needed to Secure Curt Aluminum Cargo Carrier # C18113

Question

Question:

CAN C18113 BE SECURED WITH A LOCKING PIN OR DO YOU NEED TO USE NUT AND BOLT

asked by: Leon J

0

Expert Reply:

Since the pinhole on the shank of the Curt 30x50 Cargo Carrier # C18113 is not threaded, a locking hitch pin is what you need to lock the carrier.

If you are looking for a locking hitch pin to protect your carrier from theft, the perfect fit is the etrailer Trailer Hitch Receiver Lock for 2" Hitch # e98882.

expert reply by: Bob C

0

Answer 1

Sportframe is the brand name Draw-Tite uses for some of its Class 1 trailer hitches. It doesn't denote a special fit or design. For your vehicle we offer both Class II hitches (1-1/4 inch receiver tube) or Class III hitches with a 2 inch receiver…

view full answer...

Answer 2

We have the Curt Class III hitch part #C13315 as a confirmed fit for your 2020 Mazda CX-5 that is very similar to the Draw Tite part #76138 but at this time (March 2020) this hitch has not been carried over for the 2020 models.

view full answer...

Answer 3

We can get you set up with the trailer hitch receiver, wiring harness and brake controller you need for your 2018 Mazda CX-5, starting with the hitch, and for that I recommend the Draw-Tite Trailer Hitch Receiver #76138. I prefer the Draw-Tite over…

view full answer...

Answer 4

This is the Lets Go Aero Anti-Rattle Hitch Pin for 2" Trailer Hitches #SHP2061. We do not offer SHP359 but it is a similar design. You are correct the main difference between the two is that #SHP2061 includes the pin sleeve that helps reduce the…

view full answer...

Answer 5

For your Flint Hill Goods cargo carrier part #FHG69ZR you would want the part #63232 which doubles as a hitch lock and anti-rattle device which will take unwanted movement out of the setup.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

What is Needed to Secure Curt Aluminum Cargo Carrier # C18113

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching