Does etrailer Hitch for 2021 Toyota RAV4 have Clearance for Thule Camber 2 Bike Rack

Question

Question:

Hi there, Will this hitch provide enough clearance for a Thule Camber 2-Bike Hitch Rack on a 2021 RAV4 XLE Hybrid? In other words, will the bike rack stick out far enough in order to clear the rear bumper? Thanks so much!

asked by: Ray W

1

Helpful Expert Reply:

Yes, the etrailer hitch # e23ZR that you referenced does have enough clearance for the Thule Camber 2-bike rack # TH9058 to fit.

expert reply by: Jameson C

1

Answer 1

The hitch that I recommend for your 2021 Toyota Rav4 to use your bike rack is going to be the etrailer Trailer Hitch Receiver #e23ZR. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2"…

view full answer...

Answer 2

Since the 2023 Toyota Rav4 is unchanged from the 2022 model the hitch fits carry over and the Curt hitch part #C13416 is a confirmed fit. This is a mostly hidden trailer hitch that only has the hitch opening that hangs below the rear bumper. If you…

view full answer...

Answer 3

The hitch receiver that I recommend will fit on your 2021 Toyota RAV4 Hybrid without any issues. My hitch receiver recommendation is the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2", part #e23ZR. I…

view full answer...

Answer 4

Yes, The etrailer Hitch Receiver part #e23ZR is a fit for the 2020 Toyota Rav4 Adventure. It is a concealed cross tube so the only portion that is visible once installed is the receiver tube for a nice clean looking install. It has plenty enough…

view full answer...

Answer 5

The best trailer hitch receiver for carrying bikes that fits your 2021 Toyota RAV4 Limited Hybrid is the EcoHitch Hidden Trailer Hitch Receiver #EH97FR. The reason for that is because it has the best ground and bumper clearance for a bike rack…

view full answer...

Answer 6

In regards to the Curt Trailer Hitch Receiver part #C13416 which is a fit for a 2021 Toyota RAV4, the hitch pin hole is about 5" behind the rear bumper. The distance to the hitch ball would be dependent on the length of the ball mount. I…

view full answer...

Answer 7

Yes, the Curt Trailer Hitch Receiver #C13416 will fit and work great with your 2023 Toyota RAV4 Hybrid Woodland Edition! If you were planning on using this for towing a trailer then you'll also need the Curt T-Connector Wiring #C56434, the…

view full answer...

Answer 8

For your 2021 Toyota RAV4 the etrailer hitch part #e23ZR and the Curt #C13416 are the exact same since they are both made by the same manufacturer. The Draw Tite part #DT82QR has a distance of 12 inches from the top of the hitch opening down to the…

view full answer...

Answer 9

The Curt hitch part #C13416 is a fit for your 2023 Toyota RAV4 LE and has a gloss powdercoat finish. Only the etrailer part #e23ZR that fits your vehicle has a matte finish.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...