Replacement Stabilizer Jack System for 2021 Jayco Jay Flight Travel Trailer

Question

Question:

Hello I have a 2021 jayco jay flight 264bh I was looking to upgrade my stabilizer Jacks from the scissor style to the lippert style. Can you give me the best options for my camper?

asked by: Garrett R

0

Expert Reply:

The best option from Lippert is the Lippert High-Speed Power Stabilizer Jack, # LC298707. But in this style of stabilizers, I prefer the Ultra-Fab products, they have the Power Twin II Electric Stabilizers with Dual Motors, use # UF39-941705 for a 30" lift and # UF39-941707 for 22". See the product pages for specs and application of which is best for your trailers frame width and spacing. The Ultra-Fab Power Twin II has dual 12V motors that function independently for quick, simple leveling. There is also the manual version in # UF39-941704 which is my personal choice.

Another option to consider, if your goal is to improve stability. Is to use the Ultra-Fab Eliminator II Complete Stabilizer System for Scissor Jacks, # UF24FR. The complete stabilizer system permanently attaches to your RV's scissor jacks to reduce front-to-back and side-to-side movement while parked. Once installed, the braces will extend and retract with your scissor jacks for easy setup and storage. This is a very cost effective way to improve the stability of scissor jacks. The Ultra-Fab Power Twin II Electric Stabilizer is a superior solution but I wanted to identify a lower cost option for improved stability using the current components in case that interested you.

expert reply by: Michael R

0

Answer 1

Because the power leg is protected by a 20 amp circuit breaker, it's recommended that 12 gauge wire be used. I've provided a wiring diagram of the #LC298707 for you. You can see an install video by clicking the provided link.

view full answer...

Answer 2

I attached a picture that I got from Lippert that shows the wiring diagram for their stabilizer jacks like the part #LC298707.

view full answer...

Answer 3

The High-Speed Power Stabilizer Jack #LC298707 actually doesn't have a weight capacity. This is because it is only designed to help stabilize your RV and shouldn't be used to lift it at all. The mounting hole spacing measures 68-11/16"…

view full answer...

Answer 4

The distance between the bolts on the SnapPad SnapJack for RV Scissor Jack Stabilizers #SN45FR is 2" on center which is the standard. The same is true for the higher rated #SN65FR. If you want to use these with your scissor jacks the only option…

view full answer...

Answer 5

The difference between the MORryde Scissor Jack Cross Brace Stabilizer for Trailers and RVs #MR82AR, and the JT's Strong Arm Jack Stabilizer Kit #LC191023 is while both limit side to side movement of your 30' travel trailer, only the JT will…

view full answer...

Answer 6

Hey Joe, yes the Lippert stabilizer jack part #LC298707 does fit your Grand Design Transcend 245RL but it is sold individually so if you wanted a set for the front and the rear you would need to order a quantity of two.

view full answer...

Answer 7

Hey Chad, yes the Lippert stabilizer jack system part #LC298707 is the current replacement for the 1917771. It's actually twice as fast as what you mentioned so it will be a really solid upgrade.

view full answer...

Answer 8

I have included a picture showing how the motor and switch wire up on the Lippert stabilizer jack #LC298707.

view full answer...

Answer 9

I attached a picture that shows the install instructions for the Lippert Components High-Speed Power Stabilizer Jack #LC298707 that you referenced and in it you'll notice a set distance isn't specified for where it has to install on the…

view full answer...

Answer 10

The direct replacement for your Lippert Model 113407 stabilizer jack is part #LC369774. I confirmed this with my contact at Lippert. It requires an easy bolt-on installation.

view full answer...

Answer 11

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in regards to…

view full answer...

Answer 12

The Lippert High-Speed Power Stabilizer Jack part #LC298707 would be an excellent replacement option for the now discontinued 337199 model. It does come with a new switch so you can either wire this up or reuse the existing, either way the switch…

view full answer...

Replacement Stabilizer Jack System for 2021 Jayco Jay Flight Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching