Differences Between the Lippert Components Power Stabilizer Trailer Jacks

Question

Question:

Hello, Im very interested in purchasing 2 power stabilizer jacks for my 2017 Keystone Bullet Premier and have pretty much chosen the Lippert Components power jacks, but not sure which one of the four would be best or really the difference between the two. I used the compare feature on the website, but it didnt help very much other than the cost of each and basic information. The model numbers I compared are LC298707 and LC337199.

asked by: Brian

0

Expert Reply:

You made a great choice in the Lippert Components Power Stabilizer Trailer Jack. For starters, all of the jacks measure to be 70-1/2" long with a 3,500 lb weight capacity and have a 30" lift. The difference between them is in regards to what is included with them. The part # LC369774 comes with a white switch and part # LC298707 comes with a black switch. That is the only difference.

expert reply by: Conner L

0

Answer 1

The replaceable parts for the Lippert PSX2 stabilizers include the following: Switch and Harness - #LC387874 Switch Hatch Box (White) - #LC134025 If you're needing to replace the entire unit we don't have the PSX2 but we do have the Lippert…

view full answer...

Answer 2

When installing new Rubber Wiper Seal and Bulb for RV Slide Out, #SR48FR, remove the old adhesive using a putty knife or other tool with an edge to scrap. If you use a metal tool sometimes heating it will assist in the scrapping and removal. The use…

view full answer...

Answer 3

On Dexter 12" Nev-R-Adjust Electric Brake Assembly #23-458 the shoe pad thickness is 3/16 of an inch. Dexter says that you should replace the shoes if the material gets down to 1/16 of an inch thick or less.

view full answer...

Answer 4

The TruRyde Spindle Nut #165686 has an outer measurement of 1.45 inches. You will use a 1-1/2 inch socket on this castle nut or we usually use a channel lock for these installations. I've attached a video of an installation of a hub to assist.…

view full answer...

Answer 5

Unfortunately, there are no replacement legs available for the Lippert Power Stabilizer Jacks like #LC298707, you'll need to replace the whole assembly. It's a good idea to replace the whole unit when there is significant damage.

view full answer...

Answer 6

The Lippert Ground Control 3.0, 4-Point #LC358590 OR 6-Point #LC675817, comes with a 1-year limited warranty.

view full answer...

Answer 7

The first thing I recommend you can try is a factory reset. To do this, you will need to cut all power to the unit and wait 30 seconds. After the time is up, supply power back to your stereo and check for functionality. If that doesn't work, I…

view full answer...

Answer 8

The Lippert High-Speed Power Stabilizer Jack part #LC298707 would be an excellent replacement option for the now discontinued 337199 model. It does come with a new switch so you can either wire this up or reuse the existing, either way the switch…

view full answer...

Answer 9

Yes, the Lippert Components Power Stabilizer Trailer Jack #LC298707 that you referenced does include the switch and breakers needed to complete the install.

view full answer...

Answer 10

According to Lippert, the power wire for their #LC285318 A-Frame Power Jack is 10 gauge. I've linked you to a demonstration/installation video featuring the powered jack.

view full answer...

Answer 11

You will want to use a minimum of 10 gauge wire like #10-1-1 from the battery to the motor on the Lippert High-Speed Power Stabilizer Jack #LC298707. I do not recommend running a front and rear stabilizer to the same power wire. Each wire uses a…

view full answer...

Answer 12

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 will allow you to mount your Yakima HullyRollers and Yakima Mako Saddles on aero crossbars.

view full answer...

Differences Between the Lippert Components Power Stabilizer Trailer Jacks

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching