Replacement Rear View Camera Compatible With Voyager VOM74 Monitor

Question

Question:

Howdy, I have a Voyager vom 74 monitor that attaches onto mounting plate glued to the front windshield. Is there a rear view camera that can plug into this unit? This will be going on an RV. If there is a camera that has lighting in its features that would be great. Thank You.

asked by: Kelly S

1

Helpful Expert Reply:

The Voyager RV Backup Camera w/ Night Vision # VGR84VR is compatible with your VOM74 monitor with a Voyager DIN to ASA Monitor Cable Adapter # VGR54FR.

expert reply by: Bud M

1

Answer 1

Yes the camera part #VCMS17B would work with the monitor AOM713 that you have now.

view full answer...

Answer 2

Yes, you can get a replacement camera that will plug into the existing wiring but the monitor will require a slight modification to the harness. The Voyager RV Backup Camera Black #VGR84VR will be plug and play with your current camera system on your…

view full answer...

Answer 3

When wiring up the Voyager RV Backup Camera Monitor #VOM719WP with a Camera #VGR84VR you will only need to connect the power wire to your ignition source. The trigger wires are designed to activate separate cameras using turn signals or reverse…

view full answer...

Answer 4

The WVOM43 monitor you have now is the 1st generation system and, as you said, wireless. The #VCMS17B is a wired camera so it is not directly compatible. 1st generation parts are no longer being made, and the newer generation is not backwards…

view full answer...

Answer 5

I tried looking up the cameras you would have, but I could not find anything definitive to indicate if they would be in color or not. Obviously having to get all new cameras would not be ideal. You could start with the Voyager RV LCD Observation…

view full answer...

Answer 6

To replace your old black and white backup camera with a color model I recommend the Voyager Rear Camera with LED Low Light Assist #VCMS17B. I do recommend checking the connection type from your current camera to the stereo to ensure it's the…

view full answer...

Answer 7

If you have the old first generation system like I'm thinking you have then you can replace the rear camera with part #VGR84VR. You should have a 4-pin CEC connector on your current camera if this is the case and your monitor would not have the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 11

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 12

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...