Review of Voyager RV Camera System - Rear Mount RV Backup Camera Night Vision - VGR84VR Video

The Voyager Monitor #VOM719WP will replace your AOM-7694 monitor per Voyager, but you will have to splice the existing wires from your AOM-7694 to the new Voyager Monitor. There is no direct plug and play replacement monitor. I have attached a review…

The Voyager RV Backup Camera Monitor #VOM719WP can be used as a replacement for your AOM 7694.

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

The waste valve you came from, part #T58 is not a valve that uses glue because it is designed to attach to the RV side and the waste tube with the bayonet adapters on each side of the valve. We do have waste valves that do require gluing. I have…

Basically you use install the Marine 2-Position Battery Switch #277-000403 by cutting the wire for the circuit you want to install it on and wire one end of the wiring to either post underneath the switch. When the switch is "on" the…

The Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA57YR you're looking at is a great choice and would be a nice upgrade to the previous Amazon systems. If your Airstream is not pre-wired then you have no choice but to…

I prefer the Furrion AC units over the Advent Air ones as they tend to blow colder air. For a single unit I'd go with the 15k BTU part #FR58PR which is for non-ducted applications like your enclosed trailer.

Yes, you can get a replacement camera that will plug into the existing wiring but the monitor will require a slight modification to the harness. The Voyager RV Backup Camera Black #VGR84VR will be plug and play with your current camera system on your…

Absolutely; the Voyager WiSight backup camera you referenced will work on your trailer even though it is not pre-wired. The correct part number for the camera system is the following: - Voyager WiSight 2.0 Wireless RV Backup Camera System #ASA57YR…

The Bulldog Trailer Hitch Lock for 2" Hitches, Part #BD580402, will not affect the gross towing weight capacity of your Class IV hitch receiver. (Typically all hitch pins are rated well in excess of their actual load requirements.) Since this…

Suspension enhancement systems can be used with a weight distribution system without any problem, in fact, a weight distribution system is going to be more effective at leveling out your load than the helper springs in the sense that it will…

The Rear View Safety Backup Camera System #RVS-062710 is a pretty much closed system with each component having a connector to connect to the wiring instead of splicing. Most likely the camera that isn't working has a loose connection so…