Availability of 5/8 Inch Flange Nut

Question

Question:

you have the trailer flange nuts 5/8?

asked by: Ted M

0

Expert Reply:

We have two options available for 5/8" flange nuts. We have the Flange Wheel Nut - 5/8" # 95188 with an overall flange diameter of 1-9/16" which is commonly used on hub-piloted trailer wheels. We also have the Dexter Dual Trailer Wheel Lug Nut with Swivel-Flange - Metric - Qty 1 # 6-118 which has an outer diameter of 1-5/16" and is designed for semi-trucks with 22.5" and 25.5" wheels.

expert reply by: Robin H

0

Answer 1

I recommend going with a wheel like the Taskmaster Modular Wheel in White #TA36MR or Silver #TA35ZR. These wheels only have a 0.08" positive offset keeping the center of the Provider 235/75R17.5 Radial Trailer Tire #P35175 in line with the…

view full answer...

Answer 2

Standard trailer wiring circuits on 7-ways like the part #C58155 and #PK12706 are rated for up to 40 amps so if you wanted to use a 7-way like this to power a horn that is rated for 13 amps you certainly could.

view full answer...

Answer 3

There are a few options but the Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel #LHAS701 will not fit the 5/8" studs on your trailer. You can change your hubs to ones with a 9/16" studs to use these wheels. To do this I…

view full answer...

Answer 4

Based on my research a Big Tex 16ET trailer uses a 17.5" x 6.75" wheel with an 8-bolt lug pattern and uses ST215/75R17.5 load range H tires. The Provider 215/75R17.5 Radial Tire w/ 17-1/2" Silver Mod Wheel #TA95ZR you referenced is a…

view full answer...

Answer 5

I have attached for you below a list of all our 17.5" x 6.75" trailer wheels with an 8 on 6-1/2" bolt pattern below. There are a few different types of wheels in this list such as aluminum/steel, dually/standard, and hub/lug centric.…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 12

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...