Recommended Hitch for a 2022 Chrysler Pacifica for a 2" Bike Rack

Question

Question:

I have a bike rack with a 2" shank that I want to use on my 2022 Chrysler Pacifica. I am needing a hitch that will work for my Pacifica and bike rack. Thank you for your help.

asked by: Bryon

0

Expert Reply:

For your 2022 Chrysler Pacifica with a 2" bike rack I recommend the etrailer Trailer Hitch Receiver # e98903. This hitch is made in the USA, has a bolt-on, no-drill installation and a nice matte black finish. But most importantly, this hitch has a 2" hitch receiver which is the most common size used for hitch mounted accessories like your bike rack.

expert reply by: Scott S

0

Answer 1

The bumpers on an RV/motorhome are normally not rated to tow anything or carry anything remotely heavy. Instead what you need is a new trailer hitch receiver added on to your trailer. I recommend the Curt Adjustable Trailer Hitch Receiver -…

view full answer...

Answer 2

Thanks for reaching out! I recommend checking out the Stromberg Carlson Adjustable Accessory Hitch Receiver #SC45MR for your travel trailer. Hitches like this are universal fits so you just need to make sure the frame of your trailer is in the…

view full answer...

Answer 3

I checked with the trailer hitch manufacturers and can confirm there is one trailer hitch that is a fit for the 2021 Chrysler Pacifca, which is from Curt: - Curt Trailer Hitch Receiver #C29UR This hitch (which does fit the 2020 model as well) has a…

view full answer...

Answer 4

For your 2021 Chrysler Pacifica Hybrid the etrailer #e98903 is a confirmed fit and would work great. At this time (January 2021) it's the only option.

view full answer...

Answer 5

The etrailer hitch part #e98903 does fit the 2021 Chrysler Pacifica Hybrid. It's listed in two places in our fitguide as fitting the hybrid and non-hybrid models.

view full answer...

Answer 6

When it comes to installing a hitch on your 2022 Chrysler Pacifica Pinnacle Hybrid #C29UR will not fit your vehicle. Per the manufacturer The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C13383 will bolt right up to the frame of…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...