Recommended Front Mounted Camper Tie Downs For A 2015 Ford F-250 Super Duty

Question

Question:

Do you sell the front frame mounted camper tie downs separate, for a 2015 Ford F-250 super duty?

asked by: Mike J

0

Expert Reply:

Yes, If your 2015 Ford F-250 Super Duty has a 6-3/4' bed without a running board or step under the bed with a factory hitch then you'll want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2012.

If you have an 8' bed without a running board or step under the bed with a factory hitch then you'll want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2016.

If your F-250 differs from these two options then let me know the length of your bed, if the running boards or step go past the cab and under the bed, and if the hitch is factory or not.

If you also need turnbuckles then I recommend the TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs # TLS9020.

expert reply by: Kevin C

0

Answer 1

In order to add a set of front and rear frame mounted camper tie downs to your 2016 Ford F-250, I would need to know the bed size, running board/bed step option, and trailer hitch type. For the front of your truck you will want to use the TorkLift…

view full answer...

Answer 2

Yes, you are correct without board does mean running board. The TorkLift Custom Tie-Downs #TLF2012 and #TLF3006 will fit as long as those factory running boards don't extend past the cab of the vehicle. This is because the access holes where the…

view full answer...

Answer 3

The Torklift tie down part #TLF2022 have been carried over to fit 2018 Ford F-250 Super Duty trucks. There are several variations of the truck that these are fit for, but in general it's versions of the vehicle without step boards, 6-3/4 foot…

view full answer...

Answer 4

For your 2016 Ford F-250 Super Duty with a short bed, no steps, and a factory hitch you actually want the part #TLF2012. The #TLF2016 is for the long bed trucks so it would not work for you. Then for the matching rear tie down you would want the part…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

I recommend installing the Firestone Ride-Rite Air Helper Springs #F2597 on your 2015 Ford F-250 Super Duty. This has a 5,000 lb weight capacity (although it only helps handle the load and won't increase the truck's weight capacity) and is…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...