Finding Connector for Install of Curt Trailer Wiring Harness 2022 Nissan Frontier

Question

Question:

My 22 Nissan frontier does not have the plug behind that right foot panel

asked by: DAVID B

0

Expert Reply:

Sometimes you have to dig pretty far to find the connector behind the right kick panel of your 2022 Nissan Frontier to be able to install the Curt kit part # C56225 that you referenced. The connector has to be there though so I would recommend looking further till you find it.

expert reply by: Jameson C

0

Answer 1

The relay location on Nissan vehicles can be interesting. A lot of times on the Frontier it's behind the kick panel on the passenger side like where you checked but the other common location is under the dash to the left of the steering wheel…

view full answer...

Answer 2

You need the T-One Vehicle Wiring Harness #TK58VR that includes the additional relay harness since your 2022 Nissan Pathfinder did not come with the factory tow package installed. This harness and relay we do not carry as a separate item.

view full answer...

Answer 3

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Finding Connector for Install of Curt Trailer Wiring Harness 2022 Nissan Frontier

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching