Installation of the Roadmaster Rear Anti-Sway Bar

Question

Question:

I have a 2003Fleetwood Pace Arrow 36B on the W22 chassis. I want to install the rear anti sway bar on it, which I feel I can do myself. My concern is the holes that need to be drilled in the frame rail. The video I watched showed the rear wheels removed. Do you need to remove the rear wheels in order to drill the holes.

asked by: Steve H

0

Expert Reply:

The Roadmaster Rear Anti-Sway Bar part # RM-1259-109 is a bolt-on component that does not require the rear wheels to be removed. Please note the linked installation instructions for you to review.

expert reply by: Michael R

0

Answer 1

For your 2003 Workhorse W22 the recommended rear sway bar is the part #RM-1259-108 which is a 1-1/2 inch diameter bar. This will work great and would not be a compromise in any way.

view full answer...

Answer 2

Yes, the Roadmaster Rear Anti-Sway Bar, #RM-1139-153 is designed to replace the existing part and designed to work with most aftermarket parts. This is a much stronger sway bar than factory, made with stronger steel than factory and increased to…

view full answer...

Answer 3

You're absolutely correct. For a 1999 Ford F350 SRW without the factory sway bar, you'd use #RM-1139-153 along with the #RM-590230-00 end link kit.

view full answer...

Answer 4

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 11

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 12

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...