Recommended 16' Mesh Tarp for Dump Trailer

Question

Question:

I am looking for a mesh tarp for my dump trailer . 6 feet by 17 or 18 feet long.

asked by: Monte E

0

Expert Reply:

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part # EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it to. It's made of heavy-duty mesh so it will hold you contents in place without flapping in the wind and it will last a long time due to the brass grommets and extra-strong webbing.

expert reply by: Conner L

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Trailer couplers are not rated for tongue weight capacity. They are rated for Gross trailer weight, as long as the gross trailer weight is within the capacity of the coupler, the coupler is installed properly and the trailer is designed properly, the…

view full answer...

Answer 5

The trailer hitch I recommend for your 2019 Toyota Sienna is the Draw-Tite Trailer Hitch #76112 because if you plan on towing, this hitch is rated for weight distribution and the similar hitches are not. When we test fit the Draw-Tite Hitch #76112,…

view full answer...

Answer 6

Oftentimes the VIN is located on the trailer tongue. If you cannot find it there it may be stamped on your trailer's frame somewhere and you will need to check under the trailer around the axle which of course may be a bit of a pain but sometimes…

view full answer...

Answer 7

The serial number and VIN are typically printed on a label or plate placed somewhere on the trailer's pole tongue, although it could possibly found elsewhere on the trailer frame, possibly on the inside edge of the frame so it's more…

view full answer...

Answer 8

We offer various sizes of Erickson's mesh tarps like item #EM57058 that you mentioned. You can see all of these mesh-style tarps on the linked page. The nearest size to what you're looking for is the 12 x 16-foot #EM57059. I also linked all…

view full answer...

Recommended 16' Mesh Tarp for Dump Trailer

Product Page this Question was Asked From

Continue Researching