Will The Curt Trailer Hitch # C13195 Interfere With The Spare Tire On A 2020 Hyundai Santa Fe

Question

Question:

I am concerned about the Curt hitch interfering with the spare tire on my 2020 santa fe. Can the spare tire be removed and put back in place without any issues/interference? Thanks Mike

asked by: Michael B

0

Expert Reply:

Your 2020 Hyundai Santa Fe's spare tire will need to be removed for the initial install of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13195 but will not interfere with spare tire once installed. This can be seen in the attached video where David walks you through installing this hitch on a 2020 Hyundai Santa Fe.

expert reply by: Kevin C

0

Answer 1

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 2

The total length of the Curt Class III hitch you referred to, part #C13195 is 43.04 inches.

view full answer...

Answer 3

We were able to reinstall the spare of the 2019 Hyundai Santa Fe we installed the Curt hitch part #C13195 on. If you check out the attached install link around the 8:30 mark you can see the spare mounted with the hitch. When you go to raise and lower…

view full answer...

Answer 4

For your 2019 Hyundai Santa Fe we have the Curt trailer hitch part #C13195 which is a confirmed fit and the hitch I recommend. I recommend it because it has great towing capacities, is made in the USA, and is a 2 inch hitch size which is the size…

view full answer...

Answer 5

Yes, the Curt hitch part #C13195 does fit with a full size spare store underneath a 2017 Kia Sorento. I attached a picture that shows the spare and hitch peacefully coexisting as well.

view full answer...

Answer 6

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...