Curt Trailer Hitch Installation - 2019 Hyundai Santa Fe Video

For your 2019 Hyundai Santa Fe I recommend the Curt Class III Round Tube Receiver Hitch #C13195. This Class III hitch is confirmed to fit your Santa Fe and it will use existing holes in the vehicle's frame for a no-drill installation. It…

Yes, the Curt hitch part #C13195 does fit with a full size spare store underneath a 2017 Kia Sorento. I attached a picture that shows the spare and hitch peacefully coexisting as well.

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

The total length of the Curt Class III hitch you referred to, part #C13195 is 43.04 inches.

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

We were able to reinstall the spare of the 2019 Hyundai Santa Fe we installed the Curt hitch part #C13195 on. If you check out the attached install link around the 8:30 mark you can see the spare mounted with the hitch. When you go to raise and lower…

For your 2019 Hyundai Santa Fe we have the Curt trailer hitch part #C13195 which is a confirmed fit and the hitch I recommend. I recommend it because it has great towing capacities, is made in the USA, and is a 2 inch hitch size which is the size…

Your 2020 Hyundai Santa Fe's spare tire will need to be removed for the initial install of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13195 but will not interfere with spare tire once installed. This can be seen in the…

You can determine if your 2019 Hyundai Santa Fe has the factory tow package either by having a dealership run the car's VIN to check its factory equipment or you can check under the vehicle along the frame on the driver's side to see if you…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

The MaxxTow Adjustable Ball Mount, Part #MT70068, has a distance from the center of the hitch pin hole to the upright of 8-1/8 inches. This part includes both a 1/2-inch pin and clip to secure the ball mount, and a 5/8-inch pin and clip to secure the…

We do indeed have the exact tail light kit you need for the 24x60 Reese Cargo Carrier #63153: - Light Kit for Draw-Tite, Tow Ready, and Rola Railed Cargo Carriers #20174 This light kit is a confirmed fit for the Reese cargo carrier so it is exactly…