Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(585 reviews)
Price: $215.76
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # C13195
Retail:$357.95
Our Price: $215.76
You Save: $142.19
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (585)
- Q & A (0)
- Photos
CURT Trailer Hitch - C13195
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Visible Cross Tube
- CURT
- 750 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum tongue weight: 750 lbs
- Not rated for use with weight distribution systems
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13195 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2019 - 2020 Hyundai Santa Fe
- 2016 - 2018 Kia Sorento
- 2019 - 2020 Kia Sorento excluding SX models
- 2019 - 2020 Kia Sorento SX models
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - C13195
Average Customer Rating: 4.8 out of 5 stars (585 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Kristian02/07/2023
etrailer was the best place to get a hitch. I was price shopping for my 2018 Kia Sorento. I have a small 4x4 harbor Frieght trailer. The installation videos were a great help and to be truthful the only reason I called them was because I watched the videos and figured I could do the work. I did however get confused with the wire harness. Daniel was the assistant that answered my call and within minutes he had the help I needed. I put in a picture and it took about 1 hour to install the hitch but wire harness was a little longer then saw in video but still ran and hooked up as I saw in the Video. The ONLY regret I have is I like my accessories on my car to look great ( So I should have bought a new ball and receiver) I WILL BE BACK FOR MORE. Thank You Quinn, Nichole, and Daniel. You made this a project that was effortless. Thank you etrailer for your quality of products and staff.
by: Jimmy T04/04/2024
video is spot on for installation. this is third hitch from you guys! So simple for DIY people and quality has been great! Would not hesitate to recommend, and I do not say that lightly.
by: Edward K10/23/2020
2020 Hyundai Santa Fe
I must admit that the ease of installation for a hitch thanks to factory prepared spots in the frame was a factor in my purchase of my 2020 Santa Fe. I really wanted to be able to make use of a hitch mounted bike carrier that I've had for several years.
Installation went pretty smoothly overall thanks to the videos that etrailer provides on the sight.
I did have a bit of trouble with the long bolts on the passenger side, even with my son helping me with the install. I ended up needing a hammer and long screwdriver to tap the bolt through to frame. However, after that, it was pretty straight forward.
Install was made a lot easier thanks to a pair of ramps that I have - $40 from a local vendor that have been well worthwhile for getting under my vehicles for things like oil changes.
The hitch is reasonably well hidden, particularly when viewed from a normal height and distance.
With my 4 bike carrier, even with a bike in the closest position to the tailgate, there's no danger of my bike/pedals hitting the car and scratching up the paint. And, with the drop capability of the carrier, I can actually access the cargo area of my Santa Fe without having to unload my bike. Really looking forward to taking this out for some camping trips and biking some trails.
Edward K.
10/24/2021
Does exactly what I need it to do.
by: Keith07/21/2019
2016 Kia Sorento
Product arrived quickly and packaged appropriately. I am not a mechanic but after watching the videos on this website, I decided to try this installation myself. The instructions stated a novice installer could complete it in 90 minutes. It took me 3 hours. I installed the hitch alone and took my time to not rush anything. The biggest challenge was lifting the hitch up by myself while installing the mounting bolts. I would suggest a helper for this step but none the less I was able to get it up there with the support of an extra jack stand to hold one end while I affixed the other. This seems like a solid hitch although we will only be using it for a bike rack. It was half the price of the "factory" hitch that the dealer offered and I saved $300 by installing myself. I would recommend this hitch and etrailer.com had the best price I could find.
Keith
7/22/2020
Still happy with the hitch. We do not tow. Only used for a bike rack.
by: Daniel04/20/2018
2017 Kia Sorento
I ordered this Curt hitch receiver for my 2017 Kia Sorento and it was very easy to install. it took me about 4 hours to do the hitch plus the wiring but thats mostly because I had no choice but to do this on my back and take several breaks. The wiring for it, which the site specifies which one you need when you pick this hitch receiver, is completely plug and play so its very simple. NO DRILLING IS REQUIRED! I was very pleased with the results of this install.
Daniel
4/20/2019
Excellent
by: Diontae F08/08/2019
Well, the installation was a little different than expected... Had no problem lowering the spare tire and dropping the exhaust. The problem we had was that the bolt holes on the passenger side would not line up. After reading other reviews from etrailer and other sources, it seemed like I wasn’t the only one who had this problem. We ended up strapping a row rope to the right side of the hitch and connecting it to a Dodge truck. Pulled until the bolts lined up (didn’t need to move it much.). 3 people, and 3 hours later, we got it done (if you account the rain delay). If there’s a next time, I’ll spend the $125.00 to have someone else install it.
Rachael H.
8/12/2019
That is one of the most inventive ways we have seen customers solve the flexed hitch problem. And it sounds like it worked just dandy! The problem you are describing is not uncommon and is what we call a flexed hitch. The hitches do occasionally get bent slightly out of shape during the shipping process. Just check and make sure that you dont see any cracks in the paint or chipping where it was flexed, because that would indicate the hitch has been manipulated enough to be considered unsafe.
Helpful Links
by: Carrie V08/10/2017
2016 Kia Sorento
Great product! Shipped immediatly and best price on the internet. It took us approx 1 hour to install and fit like a glove. Excellent directions and youtube links. Bought a bicycle trailer to haul bikes to Catskill Mountains. Plan on getting a lot of use out of this hitch.
Carrie V.
8/10/2018
Still going strong! A+
by: Glenn04/20/2017
Rock solid product and easy to install. Great price, quick shipping and very personal follow up. I purchased a wiring harness for another vehicle a couple years ago from etrailer, Madison was great help then and was the first person who reached out to me with this order. Great team at etrailer!
Glenn
4/24/2018
Works like a champ! Your team is awesome...I have suggested many friends and coworkers consider etrailer for their hitch needs.Regarding your question, if I had to do it again, etrailer would be my first and only stop.
by: David06/21/2023
2019 Hyundai Santa Fe
Curt Trailer Hitch C13195 fit my 2019 Hyundai Santa Fe perfectly. It went in fairly easily, although I was fortunate to have a friend with a lift. I'm 70 years old and could not have installed the hitch without the lift. Your mileage will vary. Overall, the directions are good but here are two steps that are missing. First, make sure you have a thread tap for the three shorter bolts. Those bolts go into the frame, but you need to re-tap the holes. I happen to own a tap set, but I didn't bother to bring the tap set to my friend's lift due to the lack of an instruction. That added an extra hour and a half to go home and retrieve the tap set. Second, my hardware kit had two heavy duty grooved washers that the instructions and illustrations did not include. They turned out to go under the nuts for the thicker long bolts on the driver's side of the car. After one year, I'm pleased with the hitch and can recommend it.
by: Stephen03/23/2021
2020 Hyundai Santa Fe
Installation was straightforward and simple, just follow the video. We did use a lift, and that made it much easier than laying on the ground like I did when installing the eTrailer hitch on my Honda CR-V.
I purchased the Curt hitch over the eTrailer this time because it sticks out a little further past the bumper. I have the Thule T2 Pro XL bike rack and wanted the extra clearance. Your bike rack video shown the installation of the eTrailer hitch using the Thule T2 XL, on a 2020 Hyundai Santa Fe, same SUV I have, and the clearance is only 1 1/2 inches so I wanted a little more clearance. The Curt hitch provides 3 inches of clearance between the bike rack and the back of the SUV.
Thanks for proving all the installation videos, it really helps in making the correct decision.
by: Raphael09/08/2019
2019 Hyundai Santa Fe Ultimate 2.0T HTRAC. The hitch is beautiful, top quality built, fast delivery, excellent customer service (Thanks becky!). The only problem was during installation, the video fails to take into account a steel pin that gets in the way on the side over the muffler and also the fact that there is a small gap of about a 1/2 to 3/4 inch between the hitch and the frame of the car on that side as well. If you use a crow bar you can move the pin over and the gap starts out a little big but just tighten the bolts as best you can and that should tighten it up a little. I was told by etrailer that as long as its tightened up it is normal and the gap shouldn't be a problem for towing. Haven't towed anything yet but very happy with purchase and just wish I knew about those little details, otherwise would be 5 stars.
by: Sam01/22/2021
The hitch is a PERFECT fit foe the vehicle. Installed in the driveway in just under an hour. The 750 lb. tongue weight is incredible. Could not be happier.
Sam
1/24/2022
I could not be happier. The install was quick and easy. The wiring harness is perfect. I have towed my trailer many times, my friends boat 1,500 miles last fall. everything still tight. Saved so much buying from you.
by: Bob D.09/16/2019
Installed the C13195 in my new Santa Fe so I didn't have any problems with dirt or crud accumulated at the attachment points. I did the most of the work by myself so it took a while to complete the installation. Since I'm 67 years old it took a while but I imagine two hours would be a realistic time for two people. We'll use the hitch to carry a receiver mounted bike rack and tow a trailer. The money we saved buying from etrailer, and doing the installation myself, paid for a complete Thule Roof Rack system. We're to travel. Thanks etrailer.
by: Paul09/26/2018
2018 Kia Sorento
Application is a 2018 Kia Sorento. Well, you certainly could argue that this is now the heaviest piece of metal on this car. Very substantial, heavy metal attractive hitch nicely powder coated. Arrived with no visible damage and installation generally went without a hitch. (Sorry). Generally. Turns out, whether due to manufacturing tolerances on the hitch or in South Korea, the hitch was NOT an exact fit. Bolt holes did not align perfectly and despite slots, they were out of reach of the threads on the bottom pre-threaded holes. Solution was to insert and tighten sideways mounting carriage bolts to stretch the hitch an ocean rabbit or two in order to get the bottom bolts into their threads properly. then it was an ordeal of back and forth tightening and loosening to slowly coax the hitch into position for bolting, and then into best position for strength. Even after all that, the metal plate that bolts to the frame rails never did align well with an (eventually) modest gap between the passenger frame rail and the hitch's side plate for that rail. See photo (doesn't show it the best but there's a gap). I cranked those carriage bolts as tight as i could without either them giving up or me bending the framerail on the truck. So, now on the passenger side i have two carriage bolts and two vertical bolts carrying the hitch basically in shear, without the full benefit and strength of the clamping effect of that side plate. It will probably be OK for my uses but i'll need to be extra vigilant retightening for a while and it is definitely compromised strength in my non-professional opinion. Other than that, installation instructions and everything were as represented. I probably would have gone with 3 stars but the hitch may be a little over-built so i should be OK. Still, a real bear to install properly.
by: Darren07/15/2020
2019 Hyundai Santa Fe
Purchased for a 2019 Santa Fe - After doing some research and reading reviews on here, I took a chance on this tow hitch. I was very happy with the end results as this hitch looks flawless on my vehicle. One minor issue was that my mechanic said that since this hitch was universal, he had to make a slight adjustment in order for the wire harness to fit. Other than that, everything went smooth and the installation was completed within an hour.
Excellent purchase!!
by: Dave S.01/11/2018
2016 Kia Sorento
This is the same hitch that the factory installs. My only issue is that it sits pretty low, that that doesn't have anything to do with the hitch. It is very easy to install and extremely solid. I do use Airlift 1000 airbags to adjust for sag and improve the ride while towing a trailer with 300+ lbs of tongue weight.
by: Joe U.10/15/2017
2016 Kia Sorento
The Curt Trailer Hitch makes it easy to use the bike rack. Since it's made to custom fit my KIA Sorento 2016, the installation on the car did not take long for a professional car shop. I've had a chance to use it a number of times by now, and am very satisfied with the purchase.
etrailer made the purchase easier by indicating exactly which hitch is needed.
by: Bob V04/03/2020
Very easy to install. Very good instructions on paper and in video. It took around an hour. Hitch does not stick out too far so it is hidden well. This is the 2nd vehicle I have installed an etrailer hitch on. Previous vehicle was the same easy install.
by: Jason04/09/2019
Relatively easy install. The area around the exhaust is precarious at times. Make sure you have all the tools on hand and you can get an exhaust hangar tool online for around $20 and makes dropping the exhaust very easy. After buying ramps, torque wrench, wiring, etc it was still a savings of nearly $200 over anyone else putting a hitch on the car...but now I can't blame anyone if it comes flying off.
by: Gaurang Shah08/02/2016
2016 Kia Sorento
We used online reviews to compare and ended up ordering directly from etrailer as opposed to other online vendors and they did not disappoint,
Ordering is very easy, delivery was fast and in great condition. We got it professionally installed as I am not an expert and things are looking great. We had a bike rack on it with 4 bikes and are enjoying riding them within 2 weeks or ordering the hitch.
I highly recommend this product and vendor.
by: David06/26/2020
2020 Hyundai Santa Fe
Installed on a 2020 Sante Fe SEL in my garage, did not lift the vehicle, so a little tight. I also wired for trailer lights and that too was simple. Looks good, should work perfectly. Will be using to pull utility trailer, bike rack, and carrier.
by: Danny09/16/2019
2019 Hyundai Santa Fe
Hitch arrived well packed. I had [local shop] install it for approximatley $160. I will use the hitch to transport bikes.
The hitch once installed on my 2019 Santa Fe needed an extension to get my bike rack away from the bumper/back of the car. Once the extension was installed everything worked as expected.
Get product from Curt and great price and service from etrailer.
Regards
by: steve05/26/2022
The item came on time. The product arrived just as expected. And it installed without a any problem at all (well - there was more jiggling needed than I expected). I am very pleased with the product and with etrailer.
Steve
5/27/2023
One year later its still great.
by: Guillermo12/27/2018
2019 Kia Sorento
Your provided instructions on finding connectors connections on our 2019 KIA Sorento, proved to be exact and very clear. The combined order of Curt Wiring Harness and Curt Trailer Hitch, was promptly and properly received today, and using your videos, both installations were accomplished with regular hobby hand tools to a perfect fit and fast results. NOW we are looking for a suitable boat to hit the water! THANKS FOR ALL YOUR GREAT HELP!
by: Douglas01/04/2019
2019 Hyundai Santa Fe
Needed a hitch fast for my 2019 Hyundai Santa Fe. I knew where to go. You had the hitch instock at a great price. Was delivered fast. Received it last night and installed it last night without a problem. I have bought and installed many hitches from your company without any problems. You guys are the greatest. Sorry for the ugly rusty ball in the pictures, it has been used for many years on several cars with your hitches.
25
585
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch and Bike Rack Recommendation for 2019 Hyundai Santa FeFor your 2019 Hyundai Santa Fe the trailer hitch I recommend is the custom-fit Curt Class III hitch part # C13195 because it has a 2 inch opening which most bike racks are made for and it has plenty of tongue weight capacity for a bike rack. For a bike rack I really like the Saris SuperClamp EX part # SA4025F. This is a platform bike rack that only touches the bike at the tires and only weighs 35 lbs. The biggest drawback to platform bike racks has always been the weight of them, but...
view full answer... - Hitch Recommendation for 2019 Hyundai Santa FeFor your 2019 Hyundai Santa Fe the three hitches you mentioned are very similar in design between the Draw Tite part # 75908, the Curt # C13195, and the etrailer # e98843. They all would install all the same without any being more difficult than the other. The etrailer and Curt are actually made at the same factory so they are essentially the same but the etrailer has a matte finish instead of glossy that we've found is the most durable. So since it has the highest towing capacity too...
view full answer... - Tools Needed to Install Curt Trailer Hitch on 2017 Kia SorentoThe Curt hitch part # C13195 that is a confirmed fit for your 2017 Kia Sorento has a list of tools needed to install the hitch in the attached installation instructions link. I attached a picture that shows this as well as the install time. Basically you will need a ratchet, a torque wrench, socket sizes 3/4 inch, 17 mm, 14 mm, and 11/16 inch, a 10 inch socket extension, a screwdriver, and safety glasses. I also attached an install video that covers the entire process as well.
view full answer...
- Measurement For Trailer Hitch On 2016 Kia SorentoThe Curt Trailer hitch, part # C13195 is designed to fit your 2016 Kia Sorento. This is a Class lll hitch and has a 2 inch receiver opening. We have not had an opportunity to install this hitch on the 2016 yet but you may be able to judge the distance with a quick measurement. The distance from the plate on the passenger side that mounts to the frame to the top of the receiver is 6 inches. I have attached the installation instructions and you can use them for a reference where you would...
view full answer... - Does Underbody Panel Get Reinstalled After Installing Curt Hitch # C13195 on 2019 Hyundai Santa FeWhen installing the Curt Trailer Hitch Receiver # C13195 on your 2019 Hyundai Santa Fe the underbody panel on the driver side will be removed but it will be reinstalled once the hitch is in place. I have attached a couple images of these two steps (Steps 2 and 9) from the installation instructions as well. This Class III hitch is custom-fit for your Santa Fe meaning it will use existing holes in its frame for a no-drill installation. I have attached the complete installation instructions...
view full answer...
- Recommended Hitch and Wiring for a 2019 Santa Fe UltimateThe Curt T-Connector # CU94FR and Curt # C13195 will definitely fit your 2019 Hyundai Santa Fe Ultimate without issues. We have actually done installs of both of these products on a 2019 so I included videos of them for you to check out as well.
view full answer... - Recommended Trailer Hitch for 2019 Hyundai Santa FeFor your 2019 Hyundai Santa Fe I recommend the Curt Class III Round Tube Receiver Hitch # C13195. This Class III hitch is confirmed to fit your Santa Fe and it will use existing holes in the vehicle's frame for a no-drill installation. It will provide you with a 2 inch receiver perfect for your existing bike rack. I have attached the written installation instructions that you can check out as well. All the needed hardware is included. Just note that Curt does recommend the use of a stabilizing...
view full answer...
- Trailer Hitch and Wiring Harness Installation Time for a 2020 Hyundai Santa FeThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13195 will take a pro about 45 minutes and a novice about 90 minutes. The Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # CU94FR is my recommendation for your trailer wiring. It will take about 15-20 minutes.
view full answer... - Hitch Recommendation for a 2016 Kia SorentoThe Curt hitch part # C13195 has been confirmed as a fit for your 2016 Kia Sorento so I would recommend it for you. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer...
view full answer... - Correct Curt Trailer Hitch for a 2019 Kia Sorento SXThe Curt Trailer Hitch Receiver part # C13195 is a confirmed fit for a 2019 Kia Sorento SX.
view full answer... - Hitch and Trailer Wiring Part Numbers That Fit 2019 Hyundai Santa Fe and Santa Fe XLIf you have a 2019 Hyundai Santa Fe the correct hitch is the part # C13195. If instead you had the XL Santa Fe the hitch you'd need is the # C13153. I confirmed this with Curt. The trailer wiring part # 118269 fits the XL 2019 Santa Fe and then for the non-XL model you'd have to go with a universal style harness like the ZCI kit part # 119250KIT as a custom fit model hasn't been released (as of Ocotober 2018). I hope this clears up which part numbers you need!
view full answer... - Total Length of Curt Class III C13195 Trailer Hitch for 2016 Kia SorentoThe total length of the Curt Class III hitch you referred to, part # C13195 is 43.04 inches.
view full answer...
- Mounting Bracket for 4-Way Trailer Wiring Harness on a 2018 Kia SorentoCurt trailer hitch # C13195 for the 2018 Kia Sorento does not have a mounting flange to mount a wiring harness but there are brackets that you can add. So if you installed trailer wiring harness # 118583 you could add brackets # 18144 and # 18140 to secure the 4-Way to the hitch.
view full answer... - Does Curt Hitch for 2018 Kia Sorento Allow Full Sized Spare to Store UnderneathI checked with Curt and the hitch part # C13195 that you referenced does not have any fit exclusions for versions of the vehicle that have a full-sized spare so it will fit and work well. I attached a picture to this page that shows it installed with a full-sized spare kept underneath the vehicle as well. I also attached an install video for this hitch on a similar 2018 Sorento for you to check out as well.
view full answer...
- Installing Trailer Wiring and Hitch Recommendation for a 2016 Kia Sorento 2.5L LXThe process for installing trailer wiring harness # C56256 on your 2016 Kia Sorento will be the same as the video linked for the 2015. Vehicles come in generations and the custom fit items usually fit all models in that generation which is why you can go by the 2015 video. You cannot attach the power wire on the harness to that 12 volt outlet power wire. First, installing the harness in any other way than what's stated in the installation instructions would void your warranty protection. Secondly,...
view full answer... - Will the Swagman Chinook 2 Bike Platform Rack Fit on a 2020 Hyundai Santa Fe?The best way to determine whether a bike rack that we haven't tested on a specific vehicle will be a good fit is by determining the distance from the hitch pin hole on your receiver to the edge of your bumper. Once you know this number, you'll be able to compare it to the length of the shanks on different hitch mounted bike racks and see how much clearance each rack has from your vehicle. For example, the Curt # C13195 hitch that is a fit on the 2020 Hyundai Santa Fe, has 4-1/4" from...
view full answer... - Trailer Wiring Harness for 2016 Kia SorentoThe Tekonsha Circuit Protected Tail Light w/ Converter Hardwire Kit, part # 119178KIT is indeed a fit for your 2016 Kia Sorento, but there are some plug-and play options now available that would be much easier to install. Since you don't have the factory tow package, you'd use # 118583 from Tekonsha. For a hitch, the Curt # C13195 Class III hitch has been confirmed as a fit. For a ball mount, use # C45030 and for a trailer ball, use # 63845 for a 2 inch ball or # 19260 for a 1-7/8 inch...
view full answer... - Recommended Trailer hitch For 2017 Kia Sorento For Towing Jet SkisThe trailer hitch I recommend for your 2017 Sorento is the Draw-Tite # 75908. This is a Class lll hitch and it has a 2-inch receiver opening. I recommend this hitch over the Curt Hitch # C13195 because the Curt hitch requires the use of a stabilizing strap like part # 18050 for any non-trailer loads like bike carriers, or cargo carriers. Since you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise...
view full answer... - Trailer Hitch Recommendation for 2016 Kia Sorento for Bike RackThe Curt hitch part # C13195 that you referenced is a confirmed fit for your 2016 Kia Sorento and would do a great job carrying a bike rack that you already have. This hitch has a 2 inch opening which is the most popular hitch size for hitch mounted accessories. It also would have plenty of capacity for the weight of your bikes and bike rack.
view full answer... - Trailer Hitch for a 2016 Kia SorentoFor your 2016 Kia Sorento the most popular trailer hitch option is Curt hitch # C13195. This is a Class III hitch with a 2 inch receiver opening. If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop...
view full answer... - Bike Rack for 2 Kids Bikes for Use on 2016 Kia Sedona and 2018 Kia SorentoI checked all trunk-mount bike carrier fits for your two vehicles, the 2016 Kia Sedona and the 2018 Kia Sorento, to see if we have any 2-bike trunk carrier confirmed to fit properly on both vehicles. Racks fits for each car are displayed on the two linked pages, one page for each vehicle. Unfortunately none of the 2-bike carriers we sell correctly fits both of your cars. In order to use one bike rack on both cars you would need to go with a hitch-type rack and install a hitch on each of...
view full answer... - Can Trailer Hitch Be Swapped from Old Vehicle to 2019 Hyundai Santa FeTrailer hitches are a vehicle-specific product, so the hitch for your 2012 Nissan Rogue wouldn't work on your 2019 Santa Fe. For the Santa Fe, I'd recommend the Curt Class III hitch, part # C13195. If you'll be using the hitch for towing purposes, you'll also need a trailer wiring harness like # CU94FR, a ball mount like # D-28, a # PC3 hitch pin and either a # 19260 1-7/8 inch or # 63845 2-inch trailer ball. I've linked to install videos for the hitch and the trailer wiring harness.
view full answer... - What Does Curt Trailer Hitch for a 2016 Kia Sorento Weigh, and What Other Parts are Needed to TowThe weight of the Curt Hitch part # C13195 that you referenced is right at 50 lbs. I am not sure how the Kia brand hitch comes out to 125 lbs unless it just is a much larger hitch. But this one will weigh less and I am sure cost less as well so it would be a better option. I attached an install video for this hitch for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise...
view full answer... - Trailer Hitch For 2019 Kia SorentoThe Curt Trailer hitch part # C13152 fits Kia Sorentos between 2014 - 2015. The Curt Trailer hitch that fits the 2019 Kia Sorento Is part # C13195. I have attached an installation video for your reference. There was a design change in 2015 to the Kia Sorentos so hitches that fit the first or second generation will not fit properly.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Video by:
Kathleen M
Video by:
Dustin K
Video by:
Zach D
Video by:
Robert C
Test Fit:
Randy B
Test Fit:
David F
Test Fit:
Ryan G
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kristian
2/8/2024
Second submitted review. I had bought the trailer hitch for pulling my mechanics toolbox trailer and was hit with a mobility issue so I now use it mainly for my wheelchair and scooter. I still standby my first review this has been the best company to have purchased from. The E-trailer staff will never turn there back on you, every time you need anything they are only a call away thank You again to your staff.