etrailer Trailer Hitch Inststallation - 2019 Hyundai Santa Fe Video

For your 2019 Hyundai Santa Fe I recommend the Curt Class III Round Tube Receiver Hitch #C13195. This Class III hitch is confirmed to fit your Santa Fe and it will use existing holes in the vehicle's frame for a no-drill installation. It will…

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

There are both Class I and Class III trailer hitches available that are confirmed to fit your 2010 Honda CR-V. The available Class I hitches, such as the Draw-Tite Sport Frame #24792, feature a square tube design, while the Class III hitches like the…

You can determine if your 2019 Hyundai Santa Fe has the factory tow package either by having a dealership run the car's VIN to check its factory equipment or you can check under the vehicle along the frame on the driver's side to see if you…

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

For your 2019 Hyundai Santa Fe we have the Curt trailer hitch part #C13195 which is a confirmed fit and the hitch I recommend. I recommend it because it has great towing capacities, is made in the USA, and is a 2 inch hitch size which is the size…

We were able to reinstall the spare of the 2019 Hyundai Santa Fe we installed the Curt hitch part #C13195 on. If you check out the attached install link around the 8:30 mark you can see the spare mounted with the hitch. When you go to raise and lower…

Yes, the Curt hitch part #C13195 does fit with a full size spare store underneath a 2017 Kia Sorento. I attached a picture that shows the spare and hitch peacefully coexisting as well.

Your 2020 Hyundai Santa Fe's spare tire will need to be removed for the initial install of the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13195 but will not interfere with spare tire once installed. This can be seen in the…

The total length of the Curt Class III hitch you referred to, part #C13195 is 43.04 inches.