Curt Trailer Hitch Installation - 2020 Hyundai Santa Fe Video

We were able to reinstall the spare of the 2019 Hyundai Santa Fe we installed the Curt hitch part #C13195 on. If you check out the attached install link around the 8:30 mark you can see the spare mounted with the hitch. When you go to raise and…

You'll first want to check your owner's manual for confirmation, but from what I was able to find out, the Hyundai Santa Fe Limited 2.0T has a towing capacity of 3500-lbs for a trailer with brakes and 1650-lbs for a trailer without…

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

The best trailer hitch for a 2020 Hyundai Santa Fe is the Draw-Tite Trailer Hitch Receiver #75908 because it an easy, bolt-on installation, provides the most ground clearance of any hitch for your Santa Fe and has a tab which will let you very easily…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The Curt Trailer Hitch Receiver item #C13195, that is confirmed to fit your 2020 Santa Fe, does not include a wiring harness or a rubber hitch cover. This hitch is custom fit and bolts to your Hyundai with included hardware. There are no hitches…

For your 2020 Hyundai Santa Fe we have a couple of wiring options. These will both offer a 4 way flat trailer connector. They are almost identical they install the same, have the same power output and are designed to protect your vehicle should there…

What you will want to do is test the wires going into the box of the Curt Wiring Harness part #C56496 for voltage with a circuit tester like the #PTW2993 to see if there is voltage going into the box when the taillight functions of your vehicle are…

Thank you for your wiring harness purchase. The Curt 4-pole wiring harness kit #C56251 is a custom-fit product confirmed to fit your 2012 Kia Sportage. Since this installs using connectors that match those on the car there really is no wiring diagram…

Yes the etrailer hitch part #e98843 does fit your 2020 Hyundai Santa Fe 2.0 Turbo model as it fits all models of the 2020 Hyundai Santa Fe. I attached an install video link for this hitch on a similar vehicle for you to check out as well.