Will the Replacement Tongue for Yakima HoldUp Bike Racks # 8880580 Fit on 2012 Vintage Yakima Holdup

Question

Question:

I have a 2012 vintage 1.25” tongue Yakima Holdup bike rack. I need to replace the tongue which has become cross threaded over the years of use. I see Yakima no longer stocks this replacement part, but it appears you might?

asked by: Gordon C

1

Helpful Expert Reply:

Yes, we do have it. The Replacement Tongue for Yakima HoldUp Bike Rack # 8880580 will fit your 2012 Vintage Yakima HoldUp Bike Rack.

expert reply by: Thomas M

1

Answer 1

Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly #8880580. Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt #8890200 to secure the…

view full answer...

Answer 2

We do have the correct part for you, but the 8880833 is only a fit for the Yakima HoldUp EVO Bike Rack , as opposed to the standard Yakima HoldUp bike rack. Based on your photo, you do not have the EVO, you have the standard HoldUp. The arms are not…

view full answer...

Answer 3

In order to convert your Yakima HoldUp #Y02445 to be compatible with a 2 inch hitch, you would only need the Replacement Tongue for Yakima HoldUp Bike Racks #8880580, which is a 2 inch tongue.

view full answer...

Answer 4

The Yakima HoldUp 2 Bike Rack for 2" Hitches - Platform Style - Tilting #Y02443 is different from the Yakima HoldUp EVO 2 Bike #Y02479 in a couple ways. The original could hold bikes up to 60 lbs each versus the EVO holding up to 50 lbs per…

view full answer...

Answer 5

I checked with Yakima and they never made a bike rack called the StandUp. Are you possibly referring to the HoldUp #Y02443? If so, the replacement shank for a 2 inch hitch is the part #Y8890278 for black or part #Y80126 for gray.

view full answer...

Answer 6

In order to converter a Yakima HoldUp for 1-1/4" to a Yakima HoldUp for 2" you will need the Replacement Tongue for Yakima HoldUp Bike Racks part #8880580 and the Replacement Hitch Bolt part #Y8890200. The lock core housing can be reused.

view full answer...

Answer 7

Using a wheel mount bike rack like the Yakima #Y02443 isn't recommended for bikes with fenders, as the wheel hooks won't get a tight enough hold on the tire, plus the weight of the Aventon Level exceeds the 60 lb/bike capacity of the Yakina…

view full answer...

Answer 8

I have a solution for adding turn signals to your Yakima Holdup part #Y02443 but it will require you to drill the cross tube of the rack which Yakima is not going to care for. What you need is the light kit part #98174LED which will plug into a 4-way…

view full answer...

Answer 9

I am sorry to hear about the issue you are having while using your bike rack. I do have some options for you to display your license plate with the bike rack attached but Thule does not offer any products for this purpose. The vast majority of law…

view full answer...

Answer 10

I have a solution for you but the Replacement Hitch Adapter #Y8890174 will not work for your Yakima Holdup #Y02445. We have the 2-inch replacement tongue you can install on your bike carrier. It is part #8880580. Or, if you prefer to replace the…

view full answer...

Answer 11

Yes, the Holdup for 1-1/4 inch hitches requires a different, smaller hitch pin. For that you'd need the part #Y90195 which comes with the new wrench you'd need and the smaller hitch pin for use with the #8880580.

view full answer...

Answer 12

The good news is the Replacement 2" Hitch Shank for Yakima HoldUp Bike Racks #8880580 is the confirmed correct part from Yakima to convert your HoldUp to a 2" shank. According to Yakima, you're also going to need the Replacement Hitch…

view full answer...